English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    Barcode Reader QR and NFC [RT840]
    Barcode Reader QR and NFC
    Ref.: RT840
    It reads very well the paper barcodes, documents and the mobile phone screen. The 13.56 MHz NFC card is also read. With USB / RS232 interface. Omnidirectional. Hand-free and automatic reading is supported. 1D & 2D barcode reader as Aztec code.
    V.A.T. included
    405.96 €
    Barebone Shuttle XPC Cube SZ270R9 [SZ270R9]
    Barebone Shuttle XPC Cube SZ270R9
    Ref.: SZ270R9
    Barebone (216 x 197 x 348 mm) black color, compatible with Intel® Z270, LGA 1151 (Socket H4), Intel® Celeron®, Intel® Pentium® (processor not included), DIMM, allows up to 64 GB of RAM (2133 and 2400 MHz) DDR4 in 4 memory banks, not included. With 4 internal 3.5 "bays. External interfaces: 2x DisplayPort, 1x HDMI, 4x USB 2.0, 6x USB 3.0. Internal interfaces: 3x M.2, 4x SATA. Slots: 1x PCIe x4 (Version 3.0), 1x PCIe x16 (Version 3.0). It does not include hard disks or operating system.
    V.A.T. included
    Consult
    Barrier Heater IR TAKEX® [PBH]
    Barrier Heater IR TAKEX®
    Ref.: PBH
    12/24VDC Heating kit (2 units).
    V.A.T. included
    58.83 €
    Barrier Side Panel for IR TAKEX® [BS-50F]
    Barrier Side Panel for IR TAKEX®
    Ref.: BS-50F
    Lateral trim for back to back pole mounting brackets. For TAKEX® PB series barriers.
    V.A.T. included
    79.71 €
    Barrier Side Panel for IR TAKEX® [BS-50X]
    Barrier Side Panel for IR TAKEX®
    Ref.: BS-50X
    Lateral trim for back to back post assembly. For TAKEX® PXB series barriers.
    V.A.T. included
    84.32 €
    Barrier Side Panel for IR TAKEX® [BS-60TE]
    Barrier Side Panel for IR TAKEX®
    Ref.: BS-60TE
    Side trim for pole mounted barriers at the same height.
    V.A.T. included
    92.48 €
    Base Color Printing (Front + Back) EMACS® [MISC-CC]
    Base Color Printing (Front + Back) EMACS®
    Ref.: MISC-CC
    Miscellaneous Custom Graphics Charge.
    V.A.T. included
    1.73 €
    Base Color Printing (Front + Back) [RET-CMYK-4-4]
    Base Color Printing (Front + Back)
    Ref.: RET-CMYK-4-4
    RETRANSFER artwork customization four-color process in frontside and backside. Adder to card price. Pre-customization off-line production.
    V.A.T. included
    2.96 €
    Base Color Printing (Front) [RET-CMYK-4-0]
    Base Color Printing (Front)
    Ref.: RET-CMYK-4-0
    RETRANSFER artwork customization four-color process in frontside. Adder to card price. Pre-customization off-line production.
    V.A.T. included
    2.17 €
    Base Estándar Blanca para Detectores HONEYWELL™ Vía Radio [B501RF]
    Base Estándar Blanca para Detectores HONEYWELL™ Vía Radio
    Ref.: B501RF
    Standard white surface base for NRX series analog detectors via radio, equipped with anti-extraction magnet. White color.
    V.A.T. included
    9.47 €
    Base for AGUILERA™ Algorithmic Detector Provided of Sounder with Focus [AE/SA-ASG3]
    Base for AGUILERA™ Algorithmic Detector Provided of Sounder with Focus
    Ref.: AE/SA-ASG3
    Base for algorithmic detector provided of sounder and low consumption luminous focus. The sounder and the focus are power supply at 24VDC from a monitored output module of the algorithmic central. The detector connection are realized in the socket connectors. Maximum consumption of 10mA. Sound level 90dB (A).
    V.A.T. included
    163.66 €
    Base for AGUILERA™ Algorithmic Detector with Sounder (Low Consumption) [AE/SA-SB]
    Base for AGUILERA™ Algorithmic Detector with Sounder (Low Consumption)
    Ref.: AE/SA-SB
    Low consumption programmable siren for the algorithmic series SA. It occupies 1 address in the algorithmic loop. Selection of 8 acoustic tones through dilswitch. It has an anchor to attach it to the AE / SA-ZB2 socket. It also includes a socket for inserting the SA series algorithmic detectors. Programmable siren. Base for algorithmic detector equipped with low consumption siren. The siren is fed directly from the loop. 8 acoustic tones selectable by dilswitch. Power between 17 and 27 VDC. Standby consumption: 1.1mA. Siren consumption activated: 2.8 to 9.0 mA (depending on tone). Max acoustic power: 88 dB (A) @ 1m (depending on tone). Dimensions with base: Ø 104 mm. Height with base 40 mm. Material: ABS.
    V.A.T. included
    94.86 €
    Base for AGUILERA™ Analogical Detector Provided of a Sounder [AE/SA-ASG3S]
    Base for AGUILERA™ Analogical Detector Provided of a Sounder
    Ref.: AE/SA-ASG3S
    Base for algorithmic detector provided of sounder. The sounder is power supplied at 24VDC from a monitored output module from the algorithmic central. The detector connection is realized in the socket connectors. Maximum consumption of 5mA. Sound level 90dB (A).
    V.A.T. included
    83.25 €
    Base for Aritech™ UTC™ Detectors DP2000 Series (White) with Isolator [DB2016]
    Base for Aritech™ UTC™ Detectors DP2000 Series (White) with Isolator
    Ref.: DB2016
    Connection base for all detectors of the DP2000 series, with short circuit isolator incorporated, no addressing required, stainless steel contacts, ABS material, white color.
    V.A.T. included
    20.01 €
    Base for Aritech™ UTC™ Detectors DP2000 Series (White) [DB2002]
    Base for Aritech™ UTC™ Detectors DP2000 Series (White)
    Ref.: DB2002
    Connection base for all detectors of the DP2000 series. 5 stainless steel contacts, white ABS material.
    V.A.T. included
    4.79 €
    Base for CO/NO2 DURPARK™ Detector [DKBADT]
    Base for CO/NO2 DURPARK™ Detector
    Ref.: DKBADT
    Base for DURPARK™ detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    8.89 €
    Base for DURPARK™ RS485 CO/NO2 Detector [DKBADTRS]
    Base for DURPARK™ RS485 CO/NO2 Detector
    Ref.: DKBADTRS
    Base for DURPARK™ RS485 detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    11.27 €
    Base for Intrinstically Safe Detectors [YBN-R/4IS(WHT)]
    Base for Intrinstically Safe Detectors
    Ref.: YBN-R/4IS(WHT)
    The YBN-R/4IS(WHT) is a WHITE conventional detector mounting base associated with the conventional range of intrinsically safe detectors which is fully compatible with the majority of existing conventional fire alarm control panels. The YBN-R/4IS(WHT) is supplied with square cable clamps for secure and reliable cable termination. Note that this base does not provide line continuity during detector removal (head out support). If manual call points are therefore being used, then these should be wired onto the zone first.
    V.A.T. included
    24.31 €
    Base for Removable Milestone [300-0008]
    Base for Removable Milestone
    Ref.: 300-0008
    Base for steel milestone. Red White. 1000x70x70mm
    V.A.T. included
    194.39 €
    Base for Removable Milestone [300-0013]
    Base for Removable Milestone
    Ref.: 300-0013
    Black base milestone polyethylene + screws
    V.A.T. included
    178.60 €
    Base for UTC™ Aritech™ Series 990 Detectors (White) [DB950]
    Base for UTC™ Aritech™ Series 990 Detectors (White)
    Ref.: DB950
    Connection base for all detectors of the 990 series. 5 stainless steel contacts, white ABS material.
    V.A.T. included
    6.52 €
    Base for UTC™ Aritech™ Wireless Detectors [FCX-170-001]
    Base for UTC™ Aritech™ Wireless Detectors
    Ref.: FCX-170-001
    Radio detector base for Fusion detection devices for Aritech analog control panels. Frequency 868Mhz. IP23. It is powered by 6 AA batteries. Certificates: CE and CPR (EN54 part 25).
    V.A.T. included
    200.16 €
    Base Mounted Isolator for UTC™ GST® 'I' Range Detectors [C-9504E]
    Base Mounted Isolator for UTC™ GST® 'I' Range Detectors
    Ref.: C-9504E
    In loop type fire alarm system, it often occurs that partial short circuit of loop affects the whole system. C-9504E Base Mount Short Circuit Isolator can isolate the shorted circuit from the whole system to ensure normal operation of the remaining parts and locate the failed part by illuminating a yellow indicator. When the short circuit fault is cleared, the shorted part will be restored. The isolator is applicable to all loop type fire alarm systems, either Class A or Class B loop.
    V.A.T. included
    38.33 €
    Base Mounted Isolator for UTC™ GST® Digitial Innovation Range Detectors [DC-9504E]
    Base Mounted Isolator for UTC™ GST® Digitial Innovation Range Detectors
    Ref.: DC-9504E
    In loop type fire alarm system, such condition often occurs that partial short circuit of loop affects the whole system. DC-9504E Base Mount Isolator can isolate the shorted circuit from the whole system and light the yellow LED to ensure normal operation of other parts and locate the part in fault. After the fault is cleared, the part of the loop will be re-included into the system. The isolator is applicable to both Class A and Class B fire alarm systems.
    V.A.T. included
    39.46 €
    SYSAWAY© 2025 All rights reserved