It allows the connection of up to 4 devices VCC-64.

CAG Automatic Gain Control Module for SIME™. Requires probe microphones.

It includes 4 x 19" movable studs in depth which allows the setback of the panels. 600x800mm Materials treated to prevent oxidation. Includes socket cap.

4U wall cabinet, 150 mm. Includes glass door, ideal for emergency panel LDA® VAP-1 and extensions LDA® VAP-8K. Includes blind panel.

The AT Series is divided into three models that High impedance line attenuators. 10 volume steps of 3dB. Override for priority or emergency input (even at the mute position). Bracket compatible with different cases. Operation input for system's emergency or priorityprovide from 25W @70V to 50W @100V.

The AT Series is divided into three models that High impedance line attenuators. 10 volume steps of 3dB. Override for priority or emergency input (even at the mute position). Bracket compatible with different cases. Operation input for system's emergency or priorityprovide from 25W @70V to 50W @100V.

6" metal speaker for 70/100V lines with fire- protection, Low-loss transformer 6W, 3W@100V and 3W, 1.5W@70V, Frequency response: 100-20000Hz +/- 10dB, Sensitivity: 92dB (1W 1m), Dimensions in mm (Diameter x Depth): 200 x 90. Weight: 0.9 kg, Colour: RAL: 9016.

The EN 54-24 ceiling loudspeaker CH-42TN is designed for flush in suspended ceiling and ideal for an even sound distribution. The loudspeaker has a built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the loudspeaker circuit which is connected. In this way, system integrity is maintained and ensuring loudspeakers connected in the same circuit in other areas can still be used to inform people of the situation. The loudspeaker can be easily installed by using the mounting spring attached. Fire dome is mounted in the speaker using the sliding brackets and the wing nuts. Equipped with thermal fuse and heat-resistant, high-temperature wiring. Compliance with EN54 part 24. The loudspeaker is available with or without capacitor.

LDA CI225-TN is a high-performance 20W voice alarm column loudspeaker for indoor or outdoor use and it is EN 54-24 certified. It provides a broad frequency response range, low distortion and high sound pressure level for accurate and intelligible broadcast of evacuation messages and high quality sound reproduction. Its low-profile, white color design blends easily with most interiors in locations such as hotels, conference rooms, cinemas, theme parks, factories and exhibitions.

The CI-625 is a high performance column speaker for professional installations. Its stylized design allows to adapt it to all the environments in addition to IP protection. The CI-625 can be installed on wall or columns. For that reason, it has a bracket which allows to install the acoustic box in vertical or horizontal position and rotate it 180º around itself. The 6 drivers of 2.5", contained inside of it, give to any installation a high fidelity of sound by means of the adaptable acoustic design. High sensitivity: 92 dB (1 W, 1 m). High quality audio for music or voice. Low loss transformer for 70/100V PA lines. Easy to install. Metallic grille acoustically transparent.

The LDA CI-825T is a high performance column speaker for professional installations. His stylized design allows an adaptation in all types of environments and offers an IP 54 protection. The CI-825T can be installed on the wall or on columns and includes a bracket which holds the speaker vertically or horizontally that allows a 180° rotation. Lineal frequency response:170 Hz-15kHZ). Coherent phase response. Low loss transformer with power tap selector. Acoustically-transparent metal grid.

LDACI-825TN is a high-performance 40W voice alarm column loudspeaker for outdoor use. It provides a broad frequency response range, low distortion and high sound pressure level for accurate and intelligible broadcast of evacuation messages and high quality sound reproduction. Its low-profile, white color design blends easily with most interiors in locations such as hotels, conference rooms, cinemas, theme parks, factories and exhibitions. This voice alarm outdoor column loudspeaker complies with EN 54-24.

5" metal speaker for 70/100V lines with fire protection, Low-loss transformer 6 / 3 / 1,5 / 0,75 / 0,25W @ 100V, 3 / 1,5 / 0,75 / 0,25 / 0,125W @ 70V. Frequency response: 120-18000Hz +/- 5dB, Sensitivity: 90dB (1W 1m), Dimensions in mm (Length x Width x Depth): 185 x 185 x 72, Weight: 1.7 kg, Colour: RAL:9016.

4" speaker manufactured in metal for 70 / 100V lines with fire protection. 9W of maximum power. Low loss transformer 6/3 / 1,5 / 0,75 W @ 100V, 3 / 1,5 / 0,75 / 0,25 W @ 70V. Frequency response: 300-15000Hz +/- 5dB. Sensitivity: 91 dB (1m / 1W / Khz). Dimensions in mm (Length x width x depth) 170 x 170 x 63. Color: RAL9003.

Loop expansion module and license for ONE systems expandable up to 4 units. 1 unit required for equipment configured as master in ONE expandable system. Up to 60 zones. RS-485 communication Dimensions 120 x 100 x 80 mm

Loop expansion module and license for ONE systems expandable up to 4 units. 1 unit required for equipment configured as master in ONE expandable system. Up to 24 zones. RS-485 communication Dimensions 120 x 100 x 80 mm

5" woofer and 1 tweeter with crossover filter, made of ABS with acoustically transparent metal grille for 70/100V lines, Low- loss transformer 30 / 15 / 7,5 / 3,75W @100V, 30 / 15 / 7,5 / 3,75 / 1,9W @70V, 8 ohms. Frequency response: 200-18000Hz +/- 3dB, Sensitivity: 88dB (1W 1m), Dimensions in mm (Width x Height x Depth): 162 x 242 x 182, Weight: 2.5 kg, Colour: RAL9016. (U Bracket included).

It adds 8 extra programmable buttons that can be asigned to different zones by the configuration software. It includes transparent cover for

LDA NEO Extension 4250 is an extension controller and a 4x500W amplifier or 2x1000W amplifier for the compact EN 54-16 PA/VA system NEO. 4 amplifiers of 500W or 2 amplifiers of 1000W for 100V/70V lines. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 32 attenuators LDA AT6. Integrated frontal loudspeaker for monitoring. 12 supervised contact relays for integration with Fire Alarm Control Panel.

4 class D amplifiers of 500W or 2 amplifiers of 1000W for 100V/70V lines. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 16 attenuators LDA AT6. 6 supervised contact relays for integration with Fire Alarm Control Panel.

4 class D amplifiers of 500W at 4 Ohms. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 16 attenuators LDA AT6. 6 supervised contact relays for integration with Fire Alarm Control Panel.

LDA NEO 8060 is a compact EN 54-16 certified PA/VA system that ensures a ensures a fast, safe and controlled emergency evacuation. 5 audio inputs. 8 class D amplifiers with two configurations for 100V/70V lines: 8 class D amplifiers of 120W per channel or 4 class D amplifiers of 250W per channel. Audio Matrix 7x8 (digital up to 39x2014). 8 pre-amp outputs for external PA amplifiers connection. Up to 8 multi-zone microphones MPS-8Z or VAP-1 panels connected with CAT5 UTP cable. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each I/0 channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). 4,3" Frontal touch screen with access control. 4GB of internal memory for pre-recorded messages. Integrated emergency microphone. Control for up to 32 attenuators LDA AT6. Integrated frontal loudspeaker for monitoring. 22 GPIO ports (8 supervised for integration with Fire Alarm Control Panel).

The amplification extension for the LDA NEO Evacuation Voice Alarm System includes 8 class D amplifiers of 250W per channel in 100V / 70V lines. Allows A + B connection. 8 pre-amplified outputs. Balanced audio Triple Ethernet port for Cobranet Digital Audio transmission, remote control and supervision as well as redundant cascade connection with NEO or other NEO Extensions.

The PCM-20TN is a 20W high-performance unidirectional projection loudspeaker that complies with complies with EN54-24 for voice alarm. It offers high quality sound reproduction and intelligible broadcast of voice evacuation messages thanks to its high sound pressure level, low distortion and a broad frequency response range. Its high IP ensures reliable operations over wide temperature and humidity ranges making it ideal for indoor or outdoor applications.