Audio matrix with IP connection and monitoring functions, for complete management of PA and Voice Alarm systems according EN54. Main component from COMPACT SYSTEM?control system. IP audio channels (4), for local microphone, global microphone and prerecorded messages. Three built-in analogue audio inputs (one frontal USB). Monitoring of loudspeakers zones and power amplifiers. Input for microphones with zones control connected in BUS. Emergency contact inputs & outputs, message activation or zones control. Card slots to extend the system with the necessary audio outputs. Audio outputs with individual volume control.

CAN bus speed adapter for the COMPACT system. It is used in installations with COMPACT-E units and CAN peripherals (MD-30C, ME-200C, NS-CAN ...), adapting the communication speed of the slave matrix (500 kbit / s) with the communication speed of peripherals (33.3 kbit / s). The adapter also allows to galvanically isolate the central unit of the equipment of the installation, protecting it from possible wiring problems in the installation.).

Expansion unit for the audio MATRIX COMPACT, with empty slots to extend the system with the necessary audio outputs. One COMPACT systems can expand with 10 expansion units. According to EN54.

High efficiency class D power unit with two independent 500 W channels in one mainframe. It occupies 2 units high in 19" standard Rack cabinet. Two electronically balanced 0 dB inputs and two loudspeakers outputs for 100 V line. Signal inputs connection through removable strip. Protection against peaks, short-circuits, over-heating and over-loading. Front led indicators of power supply, signal, peak and protection. Cooling function by means of fan blowers. Power supply at 230 Vac. Frequency response 80 to 16,000 Hz, SNR > 80 dB and THD <0.5 %. Dimensions 484 x 88,8 x 445,5 mm. Weight of 8.03 kg. Maximum dissipation power 2 x 750 W @ 24 V DC. Finished in black.

High efficiency class D power unit with four independent 500 W channels in one mainframe. It occupies 2 units high in 19" standard Rack cabinet. Four electronically balanced 0 dB inputs and two loudspeakers outputs for 100 V line. Signal inputs connection through removable strip. Protection against peaks, short-circuits, over-heating and over-loading. Front led indicators of power supply, signal, peak and protection. Cooling function by means of fan blowers. Power supply at 230 Vac. Frequency response 80 to 16,000 Hz, SNR > 80 dB and THD <0.5 %. Dimensions 484 x 88,8 x 445,5 mm. Weight of 8.03 kg. Maximum dissipation power 4 x 750 W @ 24 V DC. Finished in black.

Microphone desk to send live or pre-recorded announcements over the Ethernet network, control and supervision of PA system and parameter configuration. With firemen’s pannel functions built-in according to EN54. Paging to areas / groups. Activation of of generic prerecorded messages, warning and evacuation messages (EN 54-16). Live messages, with or without pre-notice tone (gong). Connection of music source for shipping the musical program to the matrix via Ethernet. Displays a list of system alarms. Double Ethernet connection (layer2 and layer3) for installations with redundant network.

The IF-7P4/0E expansion unit has four spaces to house power modules. It communicates with the main unit IF-7P4ETH/0 via CAN bus. Each IF-7P4ETH/0 can be extended with up to 10 x IF-7P4/0E

Audio interface with IP connection (COMPACT system), with DSP and monitoring functions. With four slots that allow to insert module amplifiers from MP-WD*1 series (not included) and four local analog inputs (program / priority) of configurable sensitivity. Each zone output has connections for A / B lines and input for backup amplifier. With Dual Ethernet connection to decode up to 4 simultaneous IP channels.

Microphone desk with serial bus connection and 18 configurable keys to send message to individual zones, zone groups or to activate pre-recorded messages. All call key, key to repeat the last message and selectable gong before message. Up to 16 units can be connected to one COMPACT audio matrix.

Fireman's panel with microphone for emergency broadcasts in order to evacuate building occupants in emergency situation. In addition to the dynamic hand-help microphone with talk button for live announcements, the panel allows the activation of the emergency mode and sends prerecorded messages of warning and evacuation. With microphone audio level adjust, audio level indicator and monitor speaker. It is installed on the front of the audio matrix.

Fireman's remote device for emergency broadcasts in order to evacuate building occupants in emergency situation. The equipment allows the activation of the emergency mode and sends prerecorded messages of warning and evacuation. It includes LED indicators of alarm modes and a gooseneck microphone for broadcasting live messages. Desktop mounting.

Emergency power supply with batteries (not included) in 19" 2U rack format for PA/VA systems. According to EN 54-4.

Noise sensor for COMPACT systems. It communicates with the public address system through a data bus, measuring and sending the level of noise it obtains from the place where it is located. In this way, the system can automatically modify the volume of each zone according to the ambient noise. Includes the microphone capsule in sealed box, audio signal processing circuit and communication module. Through the control software, it is possible to assign one or more sensors to each zone, while adjusting the weighting of each sensor with respect to the area in question, providing a more realistic measurement of the ambient noise level. Each COMPACT matrix allows the connection of up to 16 NS-CAN units. The noise sensor allows the use of an external microphone sensor (not included).

Card with 2 music audio inputsfor music sources to be inserted in digital audio matrix (1 slot). With two independent inputs, stereo RCA connectors with internal sum of the L and R channels of each input and Individual potentiometers for audio level adjustment. Configurable input sensitivity through software: AUX H (775 mV) and AUX L (100 mV) .

Card with 2 audio outputs with supervision to be inserted in digital audio matrix (1 slot). Audio outputs with 0 dB sensitivity and priority control output (RJ45 connectors). Measure of the status of speakers line and amplifier. Balanced outputs by transformer. Independent audio level adjustment for each output. Volume controls, bass and treble, controlled through the Compact keyboard and/or PC. Output contact to indicate failure in amplifier or loudspeakers line.

Card with 2 audio inputs with priority to be inserted in digital audio matrix (1 slot). With 2 independent inputs, one with RJ45 and the other with two connectors, RJ45 and XLR, potentiometer for audio level adjustment, possibility to pre-set the zones for each input, activated by priority contact or by VOX, signal of activated zones (acknowledge) that allows the synchronisation with external desks. Configurable sensitivity: AUX H (0 dB), AUX L (-20 dB), MIC (-60 dB). Speech filter for the microphone sensitivity.

Card with 6 speakers subzone outputs with general volume control to be inserted in digital audio matrix (1 slot). Subzone outputs ready to control attenuators with security paging option.

100 ~ 230 VAC power supply board.

Front-end Software to make possible the integration of SMP-250 systems in installations with global management enviroments using TCP/IP, OPC.

SMP-250 control and configuration program for server computer. Sending messages to one, several or all zones, to a satellite or group of satellites (areas). Editing groups of zones and/or areas. Graphic interface with maps of the installation. Assignmet priority levels for each message. Control and assignment of the amount of messages, depending on their origin. Allocation of musical programs to different zones. Automatic assignment of different types of gong depending on the type of warning: normal, alert, evacuation. Control of recording of digital announcements (WAV, MP3, WMA format ...) Programming of automatic messages and message volume memories (20) and music (10), according to schedules and remote activations. Levels of accessibility to the program's functions through passwords. Definition of user profiles. On-screen monitoring of the parameters and the public address status of each satellite. Historical files of events and alarms.