Emergency microphone desk, to be installed on the wall or tabletop. The 255 public address zones are managed from the gooseneck microphone and the touch screen, for sending live messages and pre-recorded messages, as well as other functions such as the assignment of musical programs. The handheld microphone behind the transparent cover is for exclusive use in the event of fire and only for authorized personnel. Its use automatically activates the emergency mode and as equipment that complies with the EN 54 standard, both microphone, push-to-talk (PTT) and communications are supervised. The equipment connects to the main equipment with FTP CAT5e cable or higher at a distance of up to 250 m, and can be linked (input-output) with other microphone desks. Base dimensions 60 x 260 x 210 mm, flexo 315 mm.

4EVAC-RS422 Adapter Cable for PC Connection.

Module to monitor the status of the loudspeaker line. It connects in parallel to the last speaker on the line and emits a non-audible 20 kHz tone that is used to detect anything from an impedance change to a short or open line. It prevents any connection error and line impedance variation due to aging of the installation and weather conditions. It also incorporates a thermal fuse that reduces the risk of a short circuit in the event of fire: at 135ºC it burns and causes an open circuit error on the line. Supplied in sets of 10 units.

4E-FM is a desktop or wall mounted emergency microphone station with high priority and fault surveillance. It can address any zone or set of zones in the entire system, including all call, for highest priority voice emergency. 4E-FM includes handheld microphone and monitored PTT TALK button. 4E-FM is connected to L-Net interface of COMPACT or IMPACT main unit and may be daisy-chained with more L-Net devices. 4E-FM is dedicated only for emergency purpose and can be used by fire brigades, rescue teams and authorized security personnel. As an emergency microphone compliant with EN54-16, 4E-FM features built-in surveillance of the microphone transducer, PTT button and network link monitoring. It also offers redundant L-Net connection for installations with special security requirements.

Remote contact interface with following hardware configuration EN54-16; DIN-RAIL. Max. of 2x GPIO sharing 1x L-Net connection for communication and power purpose (Without additional 24VDC power Injector). 16 programmable monitored inputs. 16 programmable outputs. 2W DC aux output (max. 200mA @ 24VDC). Firemens microphone input, 4E-FMP. RS485 datalink with: (1) Balanced analogue audio input, (2) General Fault and EVAC status output, (3) Redundant L-Net link (max. 250m), 2xRJ45 (4) Addressable: 0-255.

The 4E-SW6 switch module routes evacuation and / or alert messages, location and music announcements (BGM) to six lines of loudspeakers. Adding more 4ESW6 switch modules adds to the system the ability to get any multiple of six speaker lines, grouped into virtual zones / groups. By adding end-of-line (EOL) modules to the loudspeaker lines, the 4E-SW6 monitors and detects faults as indicated in the EN 54 standard. Dimensions 65 x 90 x 118 mm.

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

2 x 500 W RMS class D power stage with 4 A battery charger, managed from the 4EVAC-IMPACT system control unit. Up to 16 power stages with a total of 16,000 W can be used in an installation. To subdivide the power, the 4E-SW6 modules allow the creation of additional subzones. It occupies 2 units of rack height.

Commercial paging console with gooseneck microphone and pushbutton panel. 4E-CMP, 6-zones Push-button controlled paging console able to address commercial messages within the COMPACT and IMPACT architecture. Table-top version; Auto-gain control on microphone chip; Addressable: 0 - 255; 6-zone selection buttons and 1-PTT; 30cm gooseneck with dynamic hypercardioid microphone; 2 x RJ45 for single point or daisy-chain interfacing; Dimensions: 270x220x80 mm (LxWxH);

Commercial paging console with gooseneck microphone and touch-screen. 4E-CMT touch-screen controlled paging console able to address commercial messages within the COMPACT and IMPACT architecture. Table-top version; Auto-gain control on microphone chip; Addressable: 0 - 255; Configurable 7'' touchscreen for paging control and status information; 30 cm gooseneck with dynamic hyper-cardioid microphone; 2 x RJ45 for Ring, spur or daisy-chain interfacing; Dimensions: 270x220x80 mm (LxWxH);

Controller of the IMPACT system that manages the audio signals according to the assigned priority level, sends them to the DCA 2,500 amplifiers. 2 x 500 W, assigning them to their output channels A or B. The unit can manage up to 16 power stages with a total of 16,000 W. If it is necessary to subdivide the power, the 4E-SW6 modules are used for additional subzones, managed also by the controller. It can be expanded via the local network to connect, for example, microphone desks, or via two global network connections that allow multiple IMPACT and C500 systems to be linked. It occupies 1 unit of rack height.