The FS2 model is the ideal aesthetic solution for glass and aluminum exterior doors where you don't want to see any mechanism. They adapt to doors weighing up to 100 kg providing reliability and quality. Strength in 1-4. Door width less than 1100 mm. Embedded in the ground. High mechanical efficiency

The 2C N battery cable allows the current to flow. One part is embedded on the frame while the other goes to the blade. In black.

The 3C battery cable allows the current to flow. One part is embedded on the frame while the other goes to the blade. Triple contact.

The 4C lock contact is inserted in the escutcheon cut-out and has a switch that notifies wheter the latch is open or not

The 2C B battery cable allows the current to flow. One part is embedded on the frame while the other goes to the blade. In white.

Plate of 200 x 25 mm, without cut-out, for use in locks without bolt. European profile. INOX FINISH. Special for series 77. Left opening.

Plate of 200 x 25 mm, without cut-out, for use in locks without bolt. European profile. INOX FINISH. Special for series 77. Right opening.

Electric bolt equipped with adjustable timing system. It works from 12 to 24V in DC. Its operation can be set for inverted mode (fail safe) and for normal operation (fail secure). It is suitable for double-leaf doors and has a monitoring sensor that identifies whether the door is open or closed. It is made of stainless steel and is fire resistant.

The V11 electric bolt operates in inverted mode (fail safe) protecting the user's safety in the event of a power failure. It operates at 12V in direct current and has 4 levels of operating timing (0, 3, 6 and 9 seconds). The lock has a sensor in the bolt that serves as monitoring to know if the door is open or closed.

The V7 electric bolt has an inverted or "normally open" operation: while the door is closed, they receive current and the bolt remains out; when pressing, the electrical flow is interrupted and the pin is hidden; when we close again, the magnet detects the closed position and activates the piston sensor, actuating the bolt and blocking the door again. The front of the piston and the frame to be installed in the frame stand out for its narrowness (22 mm) that makes the V7 suitable for all types of doors as well as being reversible. Among its uses, banks, access controls and security facilities stand out. It can be ordered with special covers for surface mounts.

300 mm long flexible rim door loop.

510 mm long flexible rim door loop.

260 mm long flexible rim door loop.

Reader for HID® proximity cards, Reading rang up to 7cm. Membrane keypad of 16 keys, display of 4x16 keys. Prepared for flush mounting on lathes and/or staffs. Mooring fron inside. Dimensions: 177 x 140 x 50mm.

Reader for INDALA® proximity cards, Reading range up to 10cm. Membrane keypad of 16 keys, display of 4x16 keys. Prepared for flush mounting on lathes and/or staffs. Mooring fron inside. Dimensions: 177 x 140 x 50mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: N mode). With the possibility of incorporating proximity reader for ISO14443A MIFARE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm (not included). The reader has a biometric sensor with ARM9TM microprocessor. The reading is done through an optical sensor with a resolution of 500 dpi, its reading surface is 15x22 mm. Dimensions: 85 x 80 x 42 mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: N mode). With the possibility of incorporating proximity reader for ISO14443A MIFARE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm (not included). The reader has a biometric sensor with ARM9TM microprocessor. The reading is done through an optical sensor with a resolution of 500 dpi, its reading surface is 15x22 mm. Dimensions: 85 x 80 x 42 mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: n mode). Includes proximity reader for ISO14443A MIFARE® DESFIRE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm. The reader has a biometric sensor with ARM9TM microprocessor. The reading is done through an optical sensor with a resolution of 500 dpi, its reading surface is 15x22 mm. The reader can store up to 2 fingerprints per user and can be supplied (in 1: n operation) with capacity for 3,000 users (standard) or 5,000 users. Dimensions: 85 x 80 x 42 mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: n mode). Includes proximity reader for ISO14443A MIFARE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm. Reading range up to 5 cm. Dimensions: 85 x 80 x 42 mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: n mode). Includes proximity reader for ISO14443A MIFARE® DESFIRE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm. The reader has a biometric sensor with ARM9TM microprocessor. The reading is done through an optical sensor with a resolution of 500 dpi, its reading surface is 15x22 mm. The reader can store up to 2 fingerprints per user and can be supplied (in 1: n operation) with capacity for 3,000 users (standard) or 5,000 users. Dimensions: 85 x 80 x 42 mm.

Biometric fingerprint reader with capacity for 3,000 users (in 1: n mode). Includes proximity reader for ISO14443A MIFARE® cards, with read / write function, suitable for DOC system, reading range up to 5 cm. Available with black housing. Reading range up to 5 cm. Dimensions: 85 x 80 x 42 mm.

It incorporates double reader (visits and employees) for ISO14443A MIFARE® DESFire® proximity cards, read / write function, suitable for DOC system. Suitable for placement in turnstiles, barriers and parking. Mooring from the inside. It allows the collection of business cards, even with a case and clip. Includes 4x16 character display. Dimensions: 177 x 130 x 130 mm.

It incorporates double reader (visits and employees) for ISO14443A MIFARE® DESFire® proximity cards, read / write function, suitable for DOC system. Suitable for placement in turnstiles, barriers and parking. Mooring from the inside. It allows the collection of business cards, even with a case and clip. Includes 4x16 character display. Dimensions: 177 x 130 x 130 mm.

The 70-EAN-PRX HID version incorporates 125 KHz HID proximity reader. Especially indicated for presence control, allows marking of incidents and checking balances. Made of high strength ABS plastic. It has a 16-key membrane keypad (10 digits and 6 function keys). It has a display of 4X16 characters (character with a height of 10mm.), Backlit, showing at rest time, date and company name. Recommended for both access control and presence control installations, allowing the use of function keys for incident marking and querying. Surface mounting, with the possibility of acquiring support for mounting on tube or gutter. Recommended for indoor installation, possibility of outdoor installation with 70-EAN protection visor. Alarm message in case of attempted sabotage or loss of communication. Connectable to any access control ACU of the ASD, AS and AHS series. Allows connection to a maximum distance of 140 meters from the ACU in versions without intercom and 50 meters in versions with intercom.