English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    DURPARK™ 4 Zones Panel [DKCT411]
    DURPARK™ 4 Zones Panel
    Ref.: DKCT411
    4 Zone panel, expandable. Allows CO and NO2 simultaneous detection in the same loop, can control up to 16 detectors with possibility to programm up to 2 groups, allows to realize individual manoeuvres in the case of different gases or sectorize manoeuvres if its the same gas. Especially design to protect underground parking, workshops, garages and small installations. three wires communication and directionable. Includes spanish and portugese regulation in three language. Each zone includes a LCD display that works independently.
    V.A.T. included
    Consult
    DURPARK™ Mini Panels [DKCT011]
    DURPARK™ Mini Panels
    Ref.: DKCT011
    1 Zone panel, not expandable. Allows CO and NO2 simultaneous detection in the same loop, can control up to 16 detectors with possibility to programm up to 2 groups, allows to realize individual manoeuvres in the case of different gases or sectorize manoeuvres if its the same gas. Especially design to protect underground parking, workshops, garages and small installations. three wires communication and directionable. Includes spanish and portugese regulation in three language. Each zone includes a LCD display that works independently.
    V.A.T. included
    Consult
    DURPARK™ Module for Power Control [DKMDCA]
    DURPARK™ Module for Power Control
    Ref.: DKMDCA
    DURPARK™ Module for power supply control .
    V.A.T. included
    Consult
    DURPARK™ NO2 Detector 0-20ppm (Blue Ring) without Base [DKDSNO2]
    DURPARK™ NO2 Detector 0-20ppm (Blue Ring) without Base
    Ref.: DKDSNO2
    Especially design for parkings uses. Modele for NO2 uses with a range of 0-20 ppm and a resolution of ± 0.5ppm. ABS. IP20. Without base.
    V.A.T. included
    Consult
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) without Base [DKDSCORS]
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) without Base
    Ref.: DKDSCORS
    Especially design for Parkings uses. Model for CO detection with a range of 0-300ppm and a resolution of ± 1ppm. with an algorithm and a special hardware that allows to check the sensor sensitivity without necessity of gas implement. Without base. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    Consult
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) [DKDTCORS]
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring)
    Ref.: DKDTCORS
    Especially design for Parkings uses. Model for CO detection with a range of 0-300ppm and a resolution of ± 1ppm. with an algorithm and a special hardware that allows to check the sensor sensitivity without necessity of gas implement. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    Consult
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) without Base [DKDSNO2RS]
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) without Base
    Ref.: DKDSNO2RS
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20. Without base. Connection at 4 wires through RS485.
    V.A.T. included
    Consult
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) [DKDTNO2RS]
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring)
    Ref.: DKDTNO2RS
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    Consult
    DURPARK™ Zone Module [DKMDZ11]
    DURPARK™ Zone Module
    Ref.: DKMDZ11
    DURPARK™ Zone Module.
    V.A.T. included
    Consult
    DURPARK™NO2 Detector 0-20ppm (Blue Ring) with Base [DKDTNO2]
    DURPARK™NO2 Detector 0-20ppm (Blue Ring) with Base
    Ref.: DKDTNO2
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20.
    V.A.T. included
    Consult
    Dynamic Desktop Microphone for Connection to Control Server ME-F30SMP [A444MD]
    Dynamic Desktop Microphone for Connection to Control Server ME-F30SMP
    Ref.: A444MD
    Microphone desk connectable to MCHP-01. Dynamic capsule on 30 cm flexo. 2.5 m cable with two mini.jack connectors. Frequency response from 100 to 15,000 Hz. Sensitivity from 76 kHz to 1 kHz.
    V.A.T. included
    Consult
    eAdvance™ (web pre-registration) per Web Server [EL-98000-EADV10]
    eAdvance™ (web pre-registration) per Web Server
    Ref.: EL-98000-EADV10
    eAdvance™ is a web-based application that allows authorized employees to pre-register visitors through a simple web browser form on theirown computer. The customer has full control over which employees are granted access to eAdvance™, and whether the registrations entered by certain employees need to be approved by someone else in the company before being added to the SVM™ database. eAdvance™ is sold as an enterprise license customers only need 1 copy regardless of how many SVM™ stations they deploy or how many employees they have. eAdvance™ is installed on a web server running Microsoft™ IIS. For customers that do not have their own web server, EasyLobby™ provides a hosting service for an annual fee.
    V.A.T. included
    Consult
    Eagle Eye™ 16-Port (+2 Uplink) PoE+ Managed Switch - 250W [ENi-SW18g-001]
    Eagle Eye™ 16-Port (+2 Uplink) PoE+ Managed Switch - 250W
    Ref.: ENi-SW18g-001
    The Eagle Eye™ managed switches were designed specifically for video surveillance. These switches do not require any configuration - they work right out of the box. Advance features include Bandwidth control, Remote PoE Power management and Statistics Counter. Plug them in and they’re ready to go. 18 ports (16 PoE 802.3af & 802.3at, 2 Uplink). Built-In Power Supply. Voltage Range: 100-240VAC. 4K MAC address table. Switching Capacity: 7.2G. Speed: 10/100Mbps. Maximum Power Budget: 250W. Dimension (L x W x H): 440 x 200 x 44 mm.
    V.A.T. included
    Consult
    Eagle Eye™ 24-Port (+2 Uplink) PoE+ Managed Switch - 370W [ENi-SW26m-001]
    Eagle Eye™ 24-Port (+2 Uplink) PoE+ Managed Switch - 370W
    Ref.: ENi-SW26m-001
    The Eagle Eye™ managed switches were designed specifically for video surveillance. These switches do not require any configuration - they work right out of the box. Advance features include Bandwidth control, Remote PoE Power management and Statistics Counter. Plug them in and they’re ready to go. 26 ports (24 PoE 802.3af & 802.3at, 2 Uplink). Built-In Power Supply. Voltage Range: 100-240VAC. 4K MAC address table. Switching Capacity: 8.8G. Speed: 10/100Mbps. Maximum Power Budget: 370W. Dimension (L x W x H): 440 x 200 x 44 mm.
    V.A.T. included
    Consult
    Eagle Eye™ 5-Port PoE+ Managed Switch - 60W [ENi-SW05m-001]
    Eagle Eye™ 5-Port PoE+ Managed Switch - 60W
    Ref.: ENi-SW05m-001
    The Eagle Eye™ managed switches were designed specifically for video surveillance. These switches do not require any configuration - they work right out of the box. Advance features include Bandwidth control, Remote PoE Power management and Statistics Counter. Plug them in and they’re ready to go. 5 ports (4 PoE 802.3af & 802.3at). Built-In Power Supply. Voltage Range: 100-240VAC. 4K MAC address table. Switching Capacity: 1G. Speed: 10/100Mbps. Maximum Power Budget: 60W. Dimension (L x W x H): 119 x 85 x 28 mm.
    V.A.T. included
    Consult
    Eagle Eye™ 8-Port (+2 Uplink) PoE+ Managed Switch - 120W [ENi-SW10g-001]
    Eagle Eye™ 8-Port (+2 Uplink) PoE+ Managed Switch - 120W
    Ref.: ENi-SW10g-001
    The Eagle Eye™ managed switches were designed specifically for video surveillance. These switches do not require any configuration - they work right out of the box. Advance features include Bandwidth control, Remote PoE Power management and Statistics Counter. Plug them in and they’re ready to go. 10 ports (8 PoE 802.3af & 802.3at, 2 Uplink). Built-In Power Supply. Voltage Range: 100-240VAC. 4K MAC address table. Switching Capacity: 5.6G. Speed: 10/100Mbps. Maximum Power Budget: 120W. Dimension (L x W x H): 218 x 107 x 29 mm.
    V.A.T. included
    Consult
    Eagle Eye™ Camera AC Adapter (Type A USA) 12V 2Amp [ENi-PS-001]
    Eagle Eye™ Camera AC Adapter (Type A USA) 12V 2Amp
    Ref.: ENi-PS-001
    Camera AC Adapter (type A USA) 12V 2A (for CC01, CZ01 CD01).
    V.A.T. included
    Consult
    Eagle Eye™ Camera AC Adapter (Type A,G,C Universal) 12V 2Amp [ENi-PS-002]
    Eagle Eye™ Camera AC Adapter (Type A,G,C Universal) 12V 2Amp
    Ref.: ENi-PS-002
    Camera AC Adapter (type A,G,C Universal) 12V 2A (for CC01, CZ01 CD01).
    V.A.T. included
    Consult
    Eagle Eye™ SFP Multi-Mode GBIC Module - 550m [ENi-SWSFP-001]
    Eagle Eye™ SFP Multi-Mode GBIC Module - 550m
    Ref.: ENi-SWSFP-001
    Eagle Eye™ SFP Multi-Mode (850nm, 1.25Gbps, 550m) GBIC module.
    V.A.T. included
    Consult
    Easy MIFARE™ Compact Plate RS232 [0701800029]
    Easy MIFARE™ Compact Plate RS232
    Ref.: 0701800029
    MIFARE™ Plate (13.56 MHz) with embedded antenna and RS232 communications interface. Supports standard MIFARE™, MIFARE™ 4K, MIFARE™ Pro X, MIFARE™ Ultralight, MIFARE™ DESFire™ (CSN only), SLE66R35, SLE44R35 and ISO 14443A tags. Minimum order: 25 units.
    V.A.T. included
    Consult
    Easy MIFARE™ TTL Core [0701800133-1]
    Easy MIFARE™ TTL Core
    Ref.: 0701800133-1
    MIFARE™ Core (13.56 MHz), with CMOS-TTL communications interface. Supports standard MIFARE™, MIFARE™ 4K, MIFARE™ Pro X, MIFARE™ Ultralight, MIFARE™ DESFire™ (sólo CSN), SLE66R35, SLE44R35 and ISO 14443A tags. Minimum order: 25 units.
    V.A.T. included
    Consult
    Easy-Fit Rack for NOTIFIER® AM-820 [AM-82-TOP]
    Easy-Fit Rack for NOTIFIER® AM-820
    Ref.: AM-82-TOP
    "Easy-Fit" frame with preformed holes for the passage of cables.
    V.A.T. included
    Consult
    EasyLobby™ Visitor Management Bundle [EL-TURNKEY-BUNDLE]
    EasyLobby™ Visitor Management Bundle
    Ref.: EL-TURNKEY-BUNDLE
    EasyLobby™ Visitor Management Bundle includes one SVM™ v10 license, one administrator key, a DL scanner, a bar code scanner, and a visitor badge printer with 3,000 adhesive badges.
    V.A.T. included
    Consult
    EasyPack™ Battery Box Fixing Bracket - Post [BP-PB]
    EasyPack™ Battery Box Fixing Bracket - Post
    Ref.: BP-PB
    Mounting bracket for fixing the BATTERY PACK to a pole.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved