eKiosk™ Web-based self-registration software for iPad™ and other tablet computer. SVM™ software can also run in Kiosk mode (for unattended self registration).

Electronic detectors check head with smoke, CO, and heat dosing, controlled by microprocessor. Allows to select the order of testing and perform the air sweep of the detectors chamber. LEDs functioning indicators in test mode (Smoke, CO, heat, cleaning), failure and low battery. Dispose of test cartrifge with concentrated smoke and CO to generate the right dosing for the test. Includes reserve battery and charger for power supply.

Electronic detectors check head with smoke and heat dosing, controlled by microprocessor. Allows to select the order of testing and perform the air sweep of the detectors chamber. LEDs functioning indicators in test mode (Smoke, heat, cleaning), failure and low battery. Dispose of test cartrifge with concentrated smoke to generate the right dosing for the test. Includes reserve battery and charger for power supply.

Check pole for electronic detectors of 6m, with smoke, CO and heat dosing, controlled by micropressesor. Allows to select the test orden and to realize the sweep with air from the camera or detectors. LEDs functioning indicators in test mode (Smoke, CO, heat or cleaning), faillure and low battery, Dispose of test cartridge with concentred smoke and CO to generate the right dosing for the test. Includes reserve battery and charger for power supply. Dispose of fiber telescopic pole SOLO100.

Check pole for electronic detectors of 6m, with smoke and heat dosing, controlled by micropressesor. Allows to select the test orden and to realize the sweep with air from the camera or detectors. LEDs functioning indicators in test mode (Smoke, heat or cleaning), faillure and low battery, Dispose of test cartridge with concentred smoke to generate the right dosing for the test. Includes reserve battery and charger for power supply. Dispose of fiber telescopic pole SOLO100.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 1+0,5 A.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1+0,6 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1+0,6 A. GRADE 3.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 3.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 2+0,5 A.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 3+0,5 A.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 4+1 A.

Switching power supply 12 V, 5 + 0.5 Amp. High efficiency power supply for use in access control applications, CCTV, intrusion and general purpose applications. Its modular construction allows easy maintenance and updating capacity. Model in box.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 5+1 A.

To complement the range of low profile 12V CCTV power supplies, ELMDEME has just introduced an even smaller version! This 4A unit comes with 4 individually fused output circuits. It has all the features of the larger versions but measures just 185 x 200 x 60mm. Voltage range: 12 V, 4 A. IP65.

The EN range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 3 under PD6662:2010 / EN50131, with built in quality and reliability. Comprehensive Battery Management. Deep Discharge Protection. Battery Fault Detection (grade 3). Double Battery Model has independent Battery Charging & Monitoring. Dedicated Fault Outputs. EPS Fault (mains fail). APS Fault (battery fault) (grade 3). PSU Fault (general fault). Internal LED PSU Status. Full Rated Current To Load + Battery Charging. Electronic Overload Protection. Mains Transient Protection. Output (mains on): 13.8V dc nominal. Load Output: 34 Maximum 3.0A 12 hours - 2.8/3.0A. Mains Supply: 230V +10%/-15%@50Hz. Environment: -10C to 40C @ 95%RH. Enclosure Type R: 410 H x 390 W x 90 D (Clam Lid). Box Sizes for battery: "34" models: 2 x 17 or 18Ah 3.0A**. Standards: EN3 - Grade 3 Environmental Class II. **Full current to load plus additional current to charge standby battery.

Grade 3 Double Push panic button with integral EOL resistors (values 1k, 2k2, 4k7, 5k6, 6k8 a 8k2) for use with most control panels or option for Double Pole. Spare terminals allow through connection for multiple units wired to one zone. Special features include integral storage of reset key and anti-lock reset mechanism to ensure unit still operates if reset key is left in the unit and silent operation, white color.

Plastic sufrace contact, 6 wires, resistors 1k/1k, gap 11mm, cable 1m, polarized. Surface plastic contact for use on wood or aluminium, internal resistors, incorporating magnetic detection / immunity. Size: 93 x 5 x 25 mm.

Aluminium sufrace contact, 6 wires, resistors 1k/1k, gap 22mm, cable 1m, polarized. Surface plastic contact for use on wood or aluminium, internal resistors, incorporating magnetic detection / immunity. Size: 70 x 17 x 15 mm. IP67.

Plastic flush contact, plastic, 6 wires, resistors 1k/1k, gap 13mm, cable 1m. This MG contact is available with following EOL resistors too: 4k7/2k2, 8k2/8k2, 4k7/4k7, 6k8/4k7, 5k6/5k6 and 2k2/2k2.

Surface Contact - Grade 3 - Small - Plastic (white). Potted, 6 wire with 1m cable tail, 11mm operating gap. Integral 1k/1k resistors. For use in FSL or DP systems, single or multiple doors. Size: 70 x 17 x 15 mm. IP67.

6 Wire 18mm Surface Contact with 1k/1k Resistor (Green), Grade 3 - Silver. Dimensions (L X W X D): 150 X 40 X 14. Cable Length (cm): 100. Material: Aluminium.