Magnetic Contact. Miniature size perfect for homes and offices. Attractive cover keeps mounting screws and terminals screws hidden. Standard gap: 3/4" (19mm). Complete with spacers and mounting screws. Cover hides EOL resistor. Switch Type: Form A (SPST) Reed. Contact Rating: 100ma @ 28VDC.

Mini Magnetic Contact. Standard gap: 1" (25mm). 12" (30cm) leads. Self-adhesive or screw mount. Switch Type: Form A (SPST) Reed. Contact Rating: 300ma @ 30VDC. Size: 17,35 x 26,16 x 6,35 mm.

The Honeywell 947-75 is a 3/4” diameter steel door recessed contact designed to protect steel doors from intrusion. You will need to wire your 947-75 recessed contact back to an open wired zone on your alarm control panel. You will need to splice the wire leads coming out of the backside of the 947-75 recessed contact to the contact loop wire coming from your alarm control panel. Most people prefer recessed contacts to surface mount contacts as they provide a cleaner look. While surface mount contacts distract from the decor of your property, recessed contacts are hidden within your door and window frames and are therefore much less obtrusive. Unfortunately, as recessed contacts need to be drilled into a door or window, they are typically smaller devices. When you install a small magnet inside a steel door, the magnetic field normally gets obstructed and the contact does not work. However, the 947-75 uses a much larger magnet which is able to penetrate the steel door and energize the recessed contact. The steel door recessed contact is ideal for commercial and industrial applications. The Honeywell steel door recessed contact has an internal reed switch with a rating of 100mA at 28VDC. The reed switch is a Form A, SPST, normally closed contact that can be wired to any normally closed zone. When the corresponding magnet is in close proximity to the contact, the contact loop is closed and the alarm control panel is happy. If the steel door opens while the system is armed, the magnet separates from the contact and the loop opens causing an alarm. The magnet spacing gap of the 947-75 recessed contact is 1/2” when installed within a steel door.

3/8" Diameter Miniature Press Fit Magnetic Contact. With a 3/4" long magnet, the 951WG is ideal for casement windows, sliding windows, and other thin frame applications. Standard gap: 1-1/4"– the largest gap of any mini 3/8" contact. 12" leads are standard. Switch Type: Form A (SPST) Reed. Contact Rating: 300ma @ 30VDC.

The 968XTP High Security Magnetic Switch is intended to monitor the open or closed position of moveable assemblies such as doors, windows or machinery safety barriers, where an attempt to defeat the switch is a concern. It provides maximum security for protection of safes, vaults and other high security applications. Utilizing balanced magnetic contacts, the 968XTP is highly defeat resistant. In addition, internal circuitry provides 2400VDC of surge protection.

ABS white / gray polycarbonate washer for INDIC-INC indicator light.

Remote action indicator, low-key, compatible with all NOTIFIER and MORLEY-IAS fire detectors. Recommended to display the alarm status of detectors installated in closed or hidden areas.

Smoke detector barrier which includes an additional transmitter + receiver combination to be monitored from the F3000M control unit.

Addressable carbon monoxide (semiconductor probe), with connection socket included. Design according to UNE23300/84. Product delivered in 5 units box.

Analog optical smoke detector System Sensor Advanced series ivory. For connection to the Algorinet, BC600 and Ademco control panels. Requires B501AP-IV base. EN54-7 certified.

Venturi effect analisis box for smoke detection in ventilation ducts and air conditioning. Includes base for the detector, plastic transparent front cover, output for remote indicator and possibility of magnetic remote test. Requires a suction tube and NFXI-OPT optic detector.

CDZ pipe analysis chamber supplied with B401 base. Does not include the optical sensor element. Does not include sampling tube. You must order the DST tubes separately.

Detector with electrochemical probe, design to detect the presence of carbon monoxide according to requirements of UNE-23-300 1984 standards. Includes a socket for surface mounting.

Intern check test transmitter HONEYWELL™ serie SC seismic detector.

Addressable detector for carbon monoxide. Suitable for installation in underground car parks. Directly compatible with the CLIP addressable control panel. Electrochemical probe Compatible only with ID3000 series.

Addressable detector for gasoline vapors. Suitable for installation in underground car parks. Directly compatible with the CLIP addressable control panel. Catalytic probe Compatible only with ID3000 series.

Compact flame detector IR3 certified CPD EN54-10, designed for fire detection with flame for industrial applications, indoors or outdoors. The Flame detector with triple infrared technology offers a two or three times bigger range that the detectors of unique technology UV and IR and mor immunity against possible false alarms, making a flame analysis in three infrared spectrum bands. Ideal for the detectionde of fires with hydrocarbon flame, such as gasoline, kerosene, gasoil, flight fuels such as JP4, hydraulic fluids, paint and solvents, monomers and polimers such as ethylene and polyethylene, gases. Incorporates relay output breakout and alarm circuits, 4-20 mA and interface RS485. Requires support for mounting (S20/20-005) and power AUX. of 24 VDC 40mA from a power supply according to EN54-4 standards. S20/20MI-1 detector can be found in ATEX EExia version.

UV/IR compact detector designed for the detection of fires with flame for applications where CPR compliance is not required. Suitable for indoor and outdoor uses. Combined technology UV/IR flame detector incorporates the advantages of both technologies and makes it ideal for detection, in open spaces, of fire with hydrocarbon flame, hydroxide and hydrogen and metals or organic matters. Incorporates relay output alarm and breakout circuits , 4-20mA and interface RS485. Requires support for mounting (S20/20-005) and power supply AUX. of 24VDC 60mA of a power supply according to EN54-4 standards.

Magnetic contact door / window brown color. New protocol via radio "alpha". Power supply: 1 LI03V battery (supplied). Battery life: 5 years approx. Tamper: opening and wall. Dimensions: 100 x 22 x 23 mm.

Door/window compact magnetic contact. Compatibility: Galaxy Dimension & G2 (with RF portal), Domonial and Le Sucre™. New “alpha” radio protocol. Power supply : 1 battery LI03V (supplied). Battery life : ~5 years. Tamper : opening and wall mounted. Compatibility: Galaxy Dimension & G2 (with RF portal), Domonial. Measures: 100 x 22 x 23mm. White EN50131-1 Security Grade 2, Environmental Class II.

Door contact with auxiliary Input. Internal and External contacts work independently. Auxilliary input loop has tamper protection loop. Front & Rear Tampers. Enclosure protection: IP:30 / IK:04. Compatibility: Galaxy G2 (with RF portal), Domonial, VISTA (with 5882 euhs). Battery Life: >4 yrs. Operating Temperature -10° C to 55° C. Weight with Battery: 70g. Complete with Battery. EN/TS50131-2-6, Grade 2, Environmental Class II. measures (120 x 35 x 26 mm): 120 x 35 x 26mm.

Magnetic contact door / window with tamper. External connection terminals (NC). Power supply: 1 LI03V battery (supplied). Battery life: 4 years approx. Tamper: opening and wall. Operating temperature: -10º C to + 55ºC. Dimensions: 120 x 35 x 26 mm.

Designed to be used with Honeywell control panels that support V-Plex serial number polling loop devices, Honeywell’s DT7500SN-EU is a versatile, feature-rich DUAL TEC motion sensor that saves installers time and money on installations. Automatic walk test saves installers a trip to disable the LED on each unit. Patented K-Band technology is less likely to go through walls and makes set-up and installation simple. Additional benefits include 45° terminal blocks for easy installation, a quicker warm-up time and a panel-initiated walk-test.

Designed with the installer in mind, these high performance small form factor motion detectors offer a trouble-free, out of the box experience to simplify the install process and reduce install time. With the DUAL TEC DT8012F4, optimum performance is achieved using custom developed extended range Fresnel optics, look down, cover and wall tamper, and selectable pet immunity. Leading edge sensing technologies and a wide range of models to suit the requirements of most applications, Honeywell’s family of DT8000 motion detectors will maximize intruder detection while diminishing false alarms.