19" 6U rack cabinet for wall installation and glass door with access control by lock. Ideal for panel EMERGENCY PANEL MODEL LDA VAP-1 and extensions LDA VAP-8K.

The A-1 is a high performance desktop microphone for professional Public Address installations. It has lighting indicators in order to show active state, line busy or permissionto-speak granted. High performances dynamic capsule. Local power supply. Audio gain setting. Configurable contact relay for auxiliary system. Busy line and conceded-word indicators. Lighting indicator placed in the goose-neck. Suitable for EN 60849 PA/VA systems like SONORA.

EN 54-4 Battery Charger Upgrade and Activation Card for ONE-500. Once activated, the card becomes a key for the charger to work permanently.

The AT Series is divided into three models that High impedance line attenuators. 10 volume steps of 3dB. Override for priority or emergency input (even at the mute position). Bracket compatible with different cases. Operation input for system's emergency or priorityprovide from 25W @70V to 50W @100V.

The AT Series is divided into three models that High impedance line attenuators. 10 volume steps of 3dB. Override for priority or emergency input (even at the mute position). Bracket compatible with different cases. Operation input for system's emergency or priorityprovide from 25W @70V to 50W @100V.

The BA-2250 Model LDA Amplifier is specially designed for professional installations where efficiency is a relevant factor. Thanks to its class D amplification technology and its switched power supply, it achieves an energy consumption efficiency of 85%, dissipating less heat and occupying only a 19 '' rack height. The BA-2250 has two 250 W rms channels, protected against short-circuit and overload, which thanks to its flexible design, allows both high-impedance public address installations at 100V and low-impedance stereo at 8 ohms. Each channel integrates a high-pass filter and an automatic stand-by per noise door, whose operation can be activated from the rear of the equipment.

The BA-2500 Model LDA Amplifier is specially designed for professional installations where efficiency is a relevant factor. Thanks to its class D amplification technology and its switched power supply, it achieves an energy consumption efficiency of 85%, dissipating less heat and occupying only a 19 '' rack height. The BA-2500 has two channels of 500 W rms, protected against short circuit and overload, which thanks to its flexible design, allows both high-impedance public address installations at 100V and low-impedance stereo at 4 ohms. Each channel integrates a high-pass filter and an automatic stand-by per noise door, whose operation can be activated from the rear of the equipment.

3'' speaker made of metal for 70 / 100V lines with fire protection (fireproof dome sold separately). 9W of maximum power. Low loss transformer 6W, 3W @ 100V and 3W, 1,5W @ 70V. Frequency response: 180-20000Hz +/- 10dB, Sensitivity: 91 dB (1W 1m), Dimensions in mm (Diameter x depth) 181 x 129. Color: RAL 9003. Degree of protection IP 21 and Type A according to EN54-24 (including fire retardant dome LDACH42TNFDS01).

6" metal speaker for 70/100V lines with fire- protection, Low-loss transformer 6W, 3W@100V and 3W, 1.5W@70V, Frequency response: 100-20000Hz +/- 10dB, Sensitivity: 92dB (1W 1m), Dimensions in mm (Diameter x Depth): 200 x 90. Weight: 0.9 kg, Colour: RAL: 9016.

The EN 54-24 ceiling loudspeaker CH-42TN is designed for flush in suspended ceiling and ideal for an even sound distribution. The loudspeaker has a built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the loudspeaker circuit which is connected. In this way, system integrity is maintained and ensuring loudspeakers connected in the same circuit in other areas can still be used to inform people of the situation. The loudspeaker can be easily installed by using the mounting spring attached. Fire dome is mounted in the speaker using the sliding brackets and the wing nuts. Equipped with thermal fuse and heat-resistant, high-temperature wiring. Compliance with EN54 part 24. The loudspeaker is available with or without capacitor.

6'' speaker made of metal for 70 / 100V lines with fire protection (fireproof dome sold separately). 9W of maximum power. Low loss transformer 6W, 3W @ 100V and 3W, 1,5W @ 70V, Frequency response: 180-20000Hz +/- 10dB, Sensitivity: 91 dB (1W 1m). Dimensions in mm (Diameter x depth) 181 x 129. Color: RAL: 9003 and RAL 3000. Degree of protection IP 21 and Type A according to EN54-24 (including LDACH42TNFDS01 fireproof dome).

Speaker made of metal for 70 / 100V lines with fire protection with fireproof dome included. 6W of maximum power. 2x Low loss transformer 6W, 3W, 1,5W @ 100V and 3W, 1,5W, 0.75W @ 70V, Frequency response: 180-18500Hz +/- 10dB, Sensitivity: 98.4 dB (1W 1m), Dimensions in mm (Diameter x depth) 268 x 136 mm. Color: RAL: 9010. Protection degree IP 55 and Type B according to EN54-24. Installation drill 243mm.

The LDA CI-207T is a high performance speaker for professional installations. 2-way metal speaker: It consists of 2 2 '' woofers and 1 0.5 '' tweeter. Lines: 10/5 / 2.5 W @ 100 V and 5 / 2.5 / 1.25 W @ 70 V. High sensitivity: 88 dB (1 W, 1 m). Very linear frequency response: 170 - 15000 Hz. Color: black RAL 9005. Support for easy placement on ceilings. Protection degree IP 55.

LDA CI225-TN is a high-performance 20W voice alarm column loudspeaker for indoor or outdoor use and it is EN 54-24 certified. It provides a broad frequency response range, low distortion and high sound pressure level for accurate and intelligible broadcast of evacuation messages and high quality sound reproduction. Its low-profile, white color design blends easily with most interiors in locations such as hotels, conference rooms, cinemas, theme parks, factories and exhibitions.

The CI-625 is a high performance column speaker for professional installations. Its stylized design allows to adapt it to all the environments in addition to IP protection. The CI-625 can be installed on wall or columns. For that reason, it has a bracket which allows to install the acoustic box in vertical or horizontal position and rotate it 180º around itself. The 6 drivers of 2.5", contained inside of it, give to any installation a high fidelity of sound by means of the adaptable acoustic design. High sensitivity: 92 dB (1 W, 1 m). High quality audio for music or voice. Low loss transformer for 70/100V PA lines. Easy to install. Metallic grille acoustically transparent.

The LDA CI-825T is a high performance column speaker for professional installations. His stylized design allows an adaptation in all types of environments and offers an IP 54 protection. The CI-825T can be installed on the wall or on columns and includes a bracket which holds the speaker vertically or horizontally that allows a 180° rotation. Lineal frequency response:170 Hz-15kHZ). Coherent phase response. Low loss transformer with power tap selector. Acoustically-transparent metal grid.

LDACI-825TN is a high-performance 40W voice alarm column loudspeaker for outdoor use. It provides a broad frequency response range, low distortion and high sound pressure level for accurate and intelligible broadcast of evacuation messages and high quality sound reproduction. Its low-profile, white color design blends easily with most interiors in locations such as hotels, conference rooms, cinemas, theme parks, factories and exhibitions. This voice alarm outdoor column loudspeaker complies with EN 54-24.

The VCC-64 PSK Communications and Power Adapter enables the installation of LDA VCC-64 devices in the system, using a single CAT5 cable for the entire device bus. The equipment has an input for continuous power supply with a nominal voltage of 12V. It consists of a two-pole + and - female power jack connector that will be connected to the positive and negative poles of the power supply supplied with the equipment. The connection is made using a male power jack connector with an internal diameter of 2.1 mm, an external diameter of 5.5 mm and a length of 9.5 mm.

6'' loudspeaker made of metal for 70 / 100V lines, Low loss transformer 6W, 3W @ 100V and 3W, 1,5W @ 70V. Frequency response: 100-20000Hz +/- 10dB, Sensitivity: 92 dB (1W 1m), Dimensions in mm (Diameter x depth) 200 x 65 mm. Color: RAL 9016.

The DC12/2 is a self-powered array column with 12 two-inch full-range drivers that work with twelve-channel amplification. The DC12 / 2 can be controlled through a smartphone or a tablet. Easily installable with included wall bracket, the DC12 / 2 does not require vertical orientation. Specifications DC12 / 2. Amplifier Specifications. Output Power: Twelve channels, 24 watts, @ 8 ohms. Frequency response: 160 Hz to 18 kHz (+/- 3dB). Sensitivity: 1.0 volt for nominal, analog output. Max. Calculated SPL: 117 dB (peak, half space). Dispersion: 120 ° horizontal x vertical adjustable. Beam Control: Adjustable from 1.5 kHz. Directivity from 750 Hz. Pointing: Selectable by preselection. Transducers: 12 x Full Range, SSL2-1. Housing: Folded aluminum. Grille: 16 GA powder coated, plated steel. Finish: Black (RAL9010) or white (RAL9011) paint. Mounting: W-WALL-DC wall mount. Dimensions: 3-7 / 8 "x 30-1 / 2" x 3-3 / 4 ". 99mm x 775mm x 97mm.

5" metal speaker for 70/100V lines with fire protection, Low-loss transformer 6 / 3 / 1,5 / 0,75 / 0,25W @ 100V, 3 / 1,5 / 0,75 / 0,25 / 0,125W @ 70V. Frequency response: 120-18000Hz +/- 5dB, Sensitivity: 90dB (1W 1m), Dimensions in mm (Length x Width x Depth): 185 x 185 x 72, Weight: 1.7 kg, Colour: RAL:9016.

4" speaker manufactured in metal for 70 / 100V lines with fire protection. 9W of maximum power. Low loss transformer 6/3 / 1,5 / 0,75 W @ 100V, 3 / 1,5 / 0,75 / 0,25 W @ 70V. Frequency response: 300-15000Hz +/- 5dB. Sensitivity: 91 dB (1m / 1W / Khz). Dimensions in mm (Length x width x depth) 170 x 170 x 63. Color: RAL9003.

4'' speaker made of metal for 70 / 100V lines with fire protection. 9W of max power. Low loss transformer 6/3 / 1.5 / 0.75 W @ 100V, 3 / 1.5 / 0.75 / 0.25 W @ 70V, Frequency response: 300-15000Hz +/- 5dB. Sensitivity: 91 dB (1m / 1W / Khz), Dimensions in mm (Length x width x depth) 170 x 170 x 63. Color: RAL 9003. Degree of protection IP 21 and Type A according to EN54-24.

AB speaker for 70 / 100V lines with fire protection. 2x6W max power 2x Low loss transformer 6/3 / 1.5W @ 100V, 3 / 1.5 / 0.75 @ 70V, Frequency response: 300-15000Hz +/- 5dB, Sensitivity: 100.7 dB (1W / 1m) , Dimensions in mm (Length x width x depth) 252 x 194 x 82. Color: RAL: 9003. Protection degree IP 54 and Type B according to EN54-24.