English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    Surface Box for DORCAS® V7 Solenoid Bolt Lock [V70]
    Surface Box for DORCAS® V7 Solenoid Bolt Lock
    Ref.: V70
    DORCAS® V7 electric bolt Overlay Accessory. Special covers for surface mounts.
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S1 Entry Panel [8951]
    Surface Box for FERMAX® CITY™ Classic S1 Entry Panel
    Ref.: 8951
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x128x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S2 Entry Panel [8952]
    Surface Box for FERMAX® CITY™ Classic S2 Entry Panel
    Ref.: 8952
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x151x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S3 Entry Panel [8953]
    Surface Box for FERMAX® CITY™ Classic S3 Entry Panel
    Ref.: 8953
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x175x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S4 Entry Panel [8954]
    Surface Box for FERMAX® CITY™ Classic S4 Entry Panel
    Ref.: 8954
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x199x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S5 Entry Panel [8955]
    Surface Box for FERMAX® CITY™ Classic S5 Entry Panel
    Ref.: 8955
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x246x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S6 Entry Panel [8956]
    Surface Box for FERMAX® CITY™ Classic S6 Entry Panel
    Ref.: 8956
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x294x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S7 Entry Panel [8957]
    Surface Box for FERMAX® CITY™ Classic S7 Entry Panel
    Ref.: 8957
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x341x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S8 Entry Panel [8958]
    Surface Box for FERMAX® CITY™ Classic S8 Entry Panel
    Ref.: 8958
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x389x33 mm (horizontal-vertical-depth).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S9 Entry Panel [8984]
    Surface Box for FERMAX® CITY™ Classic S9 Entry Panel
    Ref.: 8984
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    Consult
    Surface Box for FERMAX® MILO 1L MEET™ Entry Panel [9518]
    Surface Box for FERMAX® MILO 1L MEET™ Entry Panel
    Ref.: 9518
    Constructed of stainless steel, it is specially designed for mounting MILO 1L panels in places where it is not possible to embed (marble walls, iconic buildings, etc.). It offers great environmental resistance and protection against shocks and vandalism, apart from an impeccable aesthetic finish.
    V.A.T. included
    Consult
    Surface Case for UTC™ Interlogix® Maglocks [FE32A]
    Surface Case for UTC™ Interlogix® Maglocks
    Ref.: FE32A
    Surface armor box for 3000N electromagnets.
    V.A.T. included
    Consult
    Surface Case for UTC™ Interlogix® Maglocks [FE37A]
    Surface Case for UTC™ Interlogix® Maglocks
    Ref.: FE37A
    Surface armor box for 6000N electromagnets.
    V.A.T. included
    Consult
    Surface Holder for DORLET® 70-EAN-BM Reader [11518000]
    Surface Holder for DORLET® 70-EAN-BM Reader
    Ref.: 11518000
    Box for installing the 70-EAN reader on the wall, with hole for inserting the tube.
    V.A.T. included
    Consult
    Surface Holder for DORLET® 70-EAN-PRX Reader [11517000]
    Surface Holder for DORLET® 70-EAN-PRX Reader
    Ref.: 11517000
    Box for installing the 70-EAN reader on the wall, with hole for inserting the tube.
    V.A.T. included
    Consult
    Surface Metal Box - 155x105x61 mm [NSYDBN1510]
    Surface Metal Box - 155x105x61 mm
    Ref.: NSYDBN1510
    Metal connection box for wall mounting, waterproof. Dimensions 155 x 105 x 61 mm.
    V.A.T. included
    Consult
    Surface Mount Adapter for ACP® FR1500-xx Readers [FR1500-ADP-S]
    Surface Mount Adapter for ACP® FR1500-xx Readers
    Ref.: FR1500-ADP-S
    Surface mount adapter for wall mount installations, made of stainless steel, for FR1500 series readers.
    V.A.T. included
    Consult
    Surface Mount Back Box for UTC™ GST® Interface Modules [B-9310]
    Surface Mount Back Box for UTC™ GST® Interface Modules
    Ref.: B-9310
    Back box for I-M9300. I-M9300 Addressable Input Module can receive normally open contact signal from field devices and transmit the action signal to fire alarm control panel (FACP). In case the input loop is broken, the module is able to transmit the fault information to the FACP, and the FACP will then display the address of the module.
    V.A.T. included
    Consult
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - GREEN [DMN787G]
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - GREEN
    Ref.: DMN787G
    The DMN787G is a surface mount back-box for the DMN700 series of manual call points. The DMN787G is green and has one terminal. Easy to install. For flush mounting of manual call points. Green. Material (body): Noryl SE100 (self-extinguishing).
    V.A.T. included
    Consult
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - RED [DMN787]
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - RED
    Ref.: DMN787
    The DMN787 is a surface mount back-box for the DMN700 series of manual call points. The DMN787 is red and has one terminal. Easy to install. For flush mounting of manual call points. Red (RAL 3020). Material (body): Noryl SE100 (self-extinguishing).
    V.A.T. included
    Consult
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - YELLOW [DMN787Y]
    Surface Mount Back-Box UTC™ Aritech™ Manual Call Points - YELLOW
    Ref.: DMN787Y
    The DMN787Y is a surface mount back-box for the DMN700 series of manual call points. The DMN787Y is yellow and has one terminal. Easy to install. For flush mounting of manual call points. Yellow. Material (body): Noryl SE100 (self-extinguishing).
    V.A.T. included
    Consult
    Surface Mounting Box for HONEYWELL™ Transmitter [SMBT]
    Surface Mounting Box for HONEYWELL™ Transmitter
    Ref.: SMBT
    Box for surface mounting of UCIP/UCIP-GPRS transmitter. Have necessary holes to realize connections and quick and easy mounting inside panels. Built in antistatic ABS, cream colour and cover with space for identification sticker.
    V.A.T. included
    Consult
    Surface Mounting Box [PS031W]
    Surface Mounting Box
    Ref.: PS031W
    Surface mounting box for KAC® Push button range.
    V.A.T. included
    Consult
    Surface QUINTELA CMM/E Metal Box - 88x88x44 mm [636370]
    Surface QUINTELA CMM/E Metal Box - 88x88x44 mm
    Ref.: 636370
    Metal connection box for wall mounting, waterproof. Dimensions 88 x 88 x 44 mm.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved