The DMN800 is a resettable, plastic replacement element manual call points. It replaces the standard manual call point glass, allowing the manual call point to be acivated and reset (using the standard test key), without the need to replace the glass afterward.

The DMN800 is a resettable, plastic replacement element manual call points. It replaces the standard manual call point glass, allowing the manual call point to be acivated and reset (using the standard test key), without the need to replace the glass afterward.

The DMN800 is a resettable, plastic replacement element manual call points. It replaces the standard manual call point glass, allowing the manual call point to be acivated and reset (using the standard test key), without the need to replace the glass afterward.

Battery pack for wireless outdoor siren, RF-7220-07-1. Operating voltage: 12.5 V (nominal). Operating temperature: -40 to +72 °C. Storage temperature: -55 to +85 °C; +35 °C (max. recommended). Compliancy: CE,? RoHS 2,? WEEE, UN 3090 Class 9.

The main two-way audio satellite ATS1521N is an audio device that is used for the verification of audio alarms. Depending on the variant of the control panel and the firmware, up to 32 ATS1521N satellites may be installed in protected facilities and connected to an Advisor Advanced panel with the bidirectional audio module Accurate ATS1520 modules and the ATS7700 PSTN module. The ATS1521N allows you to connect up to 3 ATS1522N slave audio satellites. Any mixture of a maximum of four ATS1521N and ATS1522N is allowed on the communication bus. Minimum sound level at 10 meters distance: 55dB. Dimensions: 157x91x34mm. Temperature: -10 to 55ºC.

The ATS1522N bidirectional audio slave satellite is an auxiliary audio device for the ATS1521N addressable bidirectional audio satellite, used for the verification of audio alarms. Depending on the variant of the control panel and the firmware, up to 32 ATS1521N satellites may be installed in the protected facilities and connected to an Advisor Advanced panel with the ATS1520 bidirectional audio module and the ATS7700 PSTN module installed. There can be up to 3 ATS1522N slave satellites connected to the two-way audio satellite. ATS1521N. Or a mixture of a maximum of four ATS1521N and ATS1522N on the communications bus. Minimum sound level at 10 meters distance: 55dB. Dimensions: 157x91x34mm. Temperature: -10 to 55ºC.

The DF862 gate disconnect assembly protects gates that are infrequently used. The gate can be opened and closed by manually separating the connection. When the assembly is opened, a supervision alarm is generated. When the assembly is closed the gate is protected and secure.

Steel standard square base. Dimensions: 55 x 18 mm.

L support for contacts: DC110, DC115 and DC118.

Acoustic glass break detector (Hardened or Laminated) in white colour for surface mount. Range of 7,5 meters x 360º. Working temperature from -18ºC to 50ºC. Dimensions: 83 x 45 x 23 mm.

Placa de montaje de detectores sísmicos UTC™ para facilitar su instalación sobre hormigón. Dimensiones: 80 x 97 x 5 mm.

Placa de montaje de detectores sísmicos UTC™ para facilitar su instalación sobre superficies de acero. Dimensiones: 80 x 10 x 5 mm.

Software to manage the FlexZone™ analyzer network and the input and output modules. Provides a software gateway to use UCM remotely.

Software to expand licenses of the ATS8600. This software is essential if we want to expand the licenses of fire, intrusion or CCTV. Characteristics of the computer equipment required (not included): Net Framework 3.5, Windows 7 & 8 (32 & 64 bit) Professional, Windows Server 2008, Windows Server 2012, MS SQL 2008 (limited to 10Gb in events), for installations from 30 connected devices (fire stations, intrusion, video recorders, or access control). In WS2012 we recommend the Standard Edition of SQL Server. 2x2Ghz processor, 2x60GB HDD, 8Gb RAM.

Migration from ATS8600 to ATS8610. Characteristics of the computer equipment required (not included): Net Framework 3.5, Windows 7 & 8 (32 & 64 bit) Professional, Windows Server 2008, Windows Server 2012, MS SQL 2008 (limited to 10Gb in events), for installations from 30 connected devices (fire stations, intrusion, video recorders, or access control). In WS2012 we recommend the Standard Edition of SQL Server. 2x2Ghz processor, 2x60GB HDD, 8Gb RAM.

Transmisor de prueba remota instalable dentro del detector sísmico (prueba G3) UTC™.

Polycarbonate stroboscopic flash (medium power). IP65 protection. 12VDC Power supply. Consumption: 115mA. Working temperature from -30ºC to 70ºC. Dimensions: Ø75 x 51 mm. Xenon light. 60 blinks per minute. Transparent colour housing.

The UTC KTD-405U keyboard combines the best of the previous keyboards for CCTV systems, allowing control of Digiplex® multiplexers and arrays from the same unit. From these keyboards you can operate in one of these three modes: Discrete Zone, Transparent Zone and Digiplex. In the Discrete Zone and Transparent Zone modes, the system can be divided into 32 zones with up to 64 cameras in each zone. Multiplexers and matrices can be used. In Digiplex mode, an array is the primary device of the system. A combined RS422 / RS485 communications port makes it possible for KTD-405U keyboards to work with multiplexers and CyberDomos; select and switch video; Start camera tours and select monitors. From the keyboard we can program multiplexers, CyberDomos, CyberScout, matrices and alarm interfaces.

Compact IP Truvision encoder, 1 channel, 960H or HD-TVI (max. 5Mpx), audio, alarm, RS-485, PoE power (803.AF) or 12VDC (source not included). TruVision encoders use H.265 compression with dual transmission capability, which facilitates the use of encoder bandwidth management. These encoders are designed to adhere to the open communication standards PSIA and ONVIF, and are also compatible with a set of CGI commands for easy integration into any IP system. Video streams can be set for high or low bandwidth and images can be transmitted for live viewing or sent to a designated recording location.

The TruVision TVR 46 series are full-featured hybrid video recorders capable of recording on all camera inputs. As a true hybrid recorder, the TVR 46 can be used with analog, HD-TVI and IP cameras. It is specially qualified to update existing analog installations, offering a competitive solution, rich in performance and practical for the market of analog HD recorders, standard analog and hybrid. The open HD-TVI technology allows you to connect any HD-TVI camera up to 4K (8Mpx) through an existing coaxial cable as well as standard analog cameras and even IP cameras (up to 4K (8Mpx)), which makes it a True HD Hybrid series. The TVR 46 uses H.264 or H.265 encoding for analog, HD-TVI and IP cameras. The TVR 46 series of recorders offers a flexible and full-featured hybrid recording solution that is ideal for migrating (gradually) an old analog video system to a modern high-resolution video system. Integrated into TruVision Navigator, TVR Mobile and ATS Advisor Management software platforms.

The TruVision TVR 46 series are full-featured hybrid video recorders capable of recording on all camera inputs. As a true hybrid recorder, the TVR 46 can be used with analog, HD-TVI and IP cameras. It is specially qualified to update existing analog installations, offering a competitive solution, rich in performance and practical for the market of analog HD recorders, standard analog and hybrid. The open HD-TVI technology allows you to connect any HD-TVI camera up to 4K (8Mpx) through an existing coaxial cable as well as standard analog cameras and even IP cameras (up to 4K (8Mpx)), which makes it a True HD Hybrid series. The TVR 46 uses H.264 or H.265 encoding for analog, HD-TVI and IP cameras. The TVR 46 series of recorders offers a flexible and full-featured hybrid recording solution that is ideal for migrating (gradually) an old analog video system to a modern high-resolution video system. Integrated into TruVision Navigator, TVR Mobile and ATS Advisor Management software platforms.

The TruVision TVR 46 series are full-featured hybrid video recorders capable of recording on all camera inputs. As a true hybrid recorder, the TVR 46 can be used with analog, HD-TVI and IP cameras. It is specially qualified to update existing analog installations, offering a competitive solution, rich in performance and practical for the market of analog HD recorders, standard analog and hybrid. The open HD-TVI technology allows you to connect any HD-TVI camera up to 4K (8Mpx) through an existing coaxial cable as well as standard analog cameras and even IP cameras (up to 4K (8Mpx)), which makes it a True HD Hybrid series. The TVR 46 uses H.264 or H.265 encoding for analog, HD-TVI and IP cameras. The TVR 46 series of recorders offers a flexible and full-featured hybrid recording solution that is ideal for migrating (gradually) an old analog video system to a modern high-resolution video system. Integrated into TruVision Navigator, TVR Mobile and ATS Advisor Management software platforms.

The TruVision TVR 46 series are full-featured hybrid video recorders capable of recording on all camera inputs. As a true hybrid recorder, the TVR 46 can be used with analog, HD-TVI and IP cameras. It is specially qualified to update existing analog installations, offering a competitive solution, rich in performance and practical for the market of analog HD recorders, standard analog and hybrid. The open HD-TVI technology allows you to connect any HD-TVI camera up to 4K (8Mpx) through an existing coaxial cable as well as standard analog cameras and even IP cameras (up to 4K (8Mpx)), which makes it a True HD Hybrid series. The TVR 46 uses H.264 or H.265 encoding for analog, HD-TVI and IP cameras. The TVR 46 series of recorders offers a flexible and full-featured hybrid recording solution that is ideal for migrating (gradually) an old analog video system to a modern high-resolution video system. Integrated into TruVision Navigator, TVR Mobile and ATS Advisor Management software platforms.

The TruVision TVR 46 series are full-featured hybrid video recorders capable of recording on all camera inputs. As a true hybrid recorder, the TVR 46 can be used with analog, HD-TVI and IP cameras. It is specially qualified to update existing analog installations, offering a competitive solution, rich in performance and practical for the market of analog HD recorders, standard analog and hybrid. The open HD-TVI technology allows you to connect any HD-TVI camera up to 4K (8Mpx) through an existing coaxial cable as well as standard analog cameras and even IP cameras (up to 4K (8Mpx)), which makes it a True HD Hybrid series. The TVR 46 uses H.264 or H.265 encoding for analog, HD-TVI and IP cameras. The TVR 46 series of recorders offers a flexible and full-featured hybrid recording solution that is ideal for migrating (gradually) an old analog video system to a modern high-resolution video system. Integrated into TruVision Navigator, TVR Mobile and ATS Advisor Management software platforms.