English
Español
  • Search
    • +34 902930427

    0.00 €

    Analog Intercommunication

    Products 707
    TB-SEF Telephone Handset for CC-122F [L409]
    TB-SEF Telephone Handset for CC-122F
    Ref.: L409
    TB-SEF telephone handset for CC-122F.
    V.A.T. included
    Consult
    RY-PA5 Remote Control Relay for Door Opening [L606]
    RY-PA5 Remote Control Relay for Door Opening
    Ref.: L606
    Relay used to activate the lock release in systems: LEF, VC-M, etc …
    V.A.T. included
    Consult
    RY-AC/A Relay for Intercom Call Signaling [ I340C]
    RY-AC/A Relay for Intercom Call Signaling
    Ref.: I340C
    The RY-AC is used in systems such as the LEF, the TD-H and the IE-8MD.
    V.A.T. included
    Consult
    ITF-01 Telephone Interface for SMC™ [L435]
    ITF-01 Telephone Interface for SMC™
    Ref.: L435
    Telephone interface to send incidents by synthesized voice to any telephone (indoor, outdoor, mobile, etc.) through an analog telephone extension or analog external line. At the same time, it allows spoken communication, control and programming with the secondary elements (TH03F, TH-02F, UR, UR-04, SAM-M, etc.) of the installation.
    V.A.T. included
    Consult
    SMC ™ SC-BUS Power and Data Isolator for 4 Different Sectors [L436]
    SMC ™ SC-BUS Power and Data Isolator for 4 Different Sectors
    Ref.: L436
    Power and data isolator for SMC systems. It allows to sectorize and electrically isolate the communication bus of the SMC system in up to 4 sectors. It is also responsible for opto-isolating data and audio, renewing data and providing independent power to each sector. 4 x 24 V DC power supply. Consumption 70 mA (sector 1), 45 mA (other sectors). Dimensions 226 x 195 x 35 mm. Metallic finish, white color.
    V.A.T. included
    Consult
    SMC™ LP-2LF 2-Field Corridor Lamp with Red and Green LEDs [L360L2]
    SMC™ LP-2LF 2-Field Corridor Lamp with Red and Green LEDs
    Ref.: L360L2
    Lamp for signaling the status of calls and presence in the room, for installation in the corridor of the healthcare center. Depending on the combination of the zones on, the colors and the flashing lights, all types of calls and possible presences are signaled.
    V.A.T. included
    Consult
    SMC™ MDC-01 Fall Sensor [L340]
    SMC™ MDC-01 Fall Sensor
    Ref.: L340
    Element that detects the fall of a person and made an emergency call. It has two sensors, one motion detection and another fall detection, and is commonly used in geriatric bathrooms, residences and hospitals.
    V.A.T. included
    Consult
    SMC™ ML-RC Radio Programming Remote with 5 m Range [L376]
    SMC™ ML-RC Radio Programming Remote with 5 m Range
    Ref.: L376
    The wireless call controls prevent breakage due to undue pulling, are always within reach of the patient and are more hygienic by eliminating cable and connector. The patient model works via radio, synchronized with the receiver and with a high range, and the nurse model by infrared, with a short range.
    V.A.T. included
    Consult
    SMC™ ML-RP Nurse Wireless Control with 5 m Range [L374]
    SMC™ ML-RP Nurse Wireless Control with 5 m Range
    Ref.: L374
    The wireless call controls prevent breakage due to undue pulling, are always within reach of the patient and are more hygienic by eliminating cable and connector. The patient model works via radio, synchronized with the receiver and with a high range, and the nurse model by infrared, with a short range.
    V.A.T. included
    Consult
    SMC™ ML-R Patient Wireless Control with 20 m Range [L372]
    SMC™ ML-R Patient Wireless Control with 20 m Range
    Ref.: L372
    The wireless call controls prevent breakage due to undue pulling, are always within reach of the patient and are more hygienic by eliminating cable and connector. The patient model works via radio, synchronized with the receiver and with a high range, and the nurse model by infrared, with a short range.
    V.A.T. included
    Consult
    SMC™ RL-1 Receiver [L370]
    SMC™ RL-1 Receiver
    Ref.: L370
    Wireless command receiver, both via radio and infrared, to accept calls, presences and programming of the wireless controls.
    V.A.T. included
    Consult
    SMC™ U-PB Mechanism for Universal Box (Frameless) with Call Button + Presence and Handle [L358FU]
    SMC™ U-PB Mechanism for Universal Box (Frameless) with Call Button + Presence and Handle
    Ref.: L358FU
    Room mechanism for flush mounting. It has a call key, presence key and call in progress and active presence indicator lights. It incorporates a handle to generate an emergency call, being suitable for installation in bathrooms. With USB type B connector for connection of the U-ML model bed control, control disconnection warning and outputs for control of up to 2 contactors. It is installed in a universal box, both standard and for false partitions. Compatible with frames of the M-420 series and with most series of electrical equipment.
    V.A.T. included
    Consult
    SMC™ U-PBI Bathroom Handle Waterproof IP65 [L356IP]
    SMC™ U-PBI Bathroom Handle Waterproof IP65
    Ref.: L356IP
    Universal box flush mount call mechanism (standard or for false partition). It allows making a bathroom call from the handle and is prepared for installation in humid environments thanks to its IP 65 protection. Frame of the M-420 series or compatible electrical series.
    V.A.T. included
    Consult
    Call Push Button (Key and Handle) SMC™ PT-1BF Special for Bathrooms [L358P]
    Call Push Button (Key and Handle) SMC™ PT-1BF Special for Bathrooms
    Ref.: L358P
    Flush mount room mechanism. It allows making a bathroom call (activated from the button or from the handle) and the presence of a nurse. It has presence and call buttons, a cord to activate the bathroom call and light indicators for a call in progress and active presence.
    V.A.T. included
    Consult
    SMC™ U-ML Bed Controller with Call Button and Light Control Buttons (for U-PT) [L368FU]
    SMC™ U-ML Bed Controller with Call Button and Light Control Buttons (for U-PT)
    Ref.: L368FU
    Bed control with call button and additional buttons for light control using remote control switches. It has 1.9 m of cable and USB type B connector. It is used together with the U-PT model room mechanism
    V.A.T. included
    Consult
    SMC™ ML-P Bed Remote with Call Button [L369]
    SMC™ ML-P Bed Remote with Call Button
    Ref.: L369
    Hand control for the patient, with call button and reassurance led. Includes 1.9 m cable and RJ45 connector, for connection to the PT-1CF module and the TH-02F and TH-03F room terminals.
    V.A.T. included
    Consult
    SMC™ ML-F Bed Controller with Call Button and Light Control Buttons [L368P]
    SMC™ ML-F Bed Controller with Call Button and Light Control Buttons
    Ref.: L368P
    Hand control for the patient, with call button, reassurance led and two buttons for activating the lights (by means of 24 V DC remote control switches). Includes 1.9 m cable and RJ45 connector, for connection to the PT-1CF module and the TH-02F and TH-03F room terminals.
    V.A.T. included
    Consult
    SMC™ U-PM Call Button [L359A]
    SMC™ U-PM Call Button
    Ref.: L359A
    U series, for universal box. Configurable call button (normal or emergency) or presence. LEDs: call in progress and active presence. Fully metallic.
    V.A.T. included
    Consult
    SMC™ U-PT Call Button [L356FU]
    SMC™ U-PT Call Button
    Ref.: L356FU
    U series, for universal box. Push buttons: presence and normal call. LEDs: call in progress and active presence. USB connector for U-ML remote control. Command disconnected warning.
    V.A.T. included
    Consult
    Call Push Button SMC™ PT-1CF [L356P]
    Call Push Button SMC™ PT-1CF
    Ref.: L356P
    Flush mount room mechanism. It allows making a patient call, nurse presence and emergency call. It has presence and call buttons, call-in-progress and active presence light indicators, as well as a connector for the ML-F remote control.
    V.A.T. included
    Consult
    SMC™ UC-4S Remote Control Unit for 4 Zones (Signaling Only) [L428]
    SMC™ UC-4S Remote Control Unit for 4 Zones (Signaling Only)
    Ref.: L428
    Remote control unit for 4 zones that establishes data signaling between the elements of up to 4 call points and the control center. Allows connection of call and presence mechanisms and hallway signaling lamps. Surface installation. Black metallic finish. Dimensions 165 x 120 x 23 mm.
    V.A.T. included
    Consult
    SMC™ UC-S Remote Control Unit for 1 Zone (Signaling Only) [L426]
    SMC™ UC-S Remote Control Unit for 1 Zone (Signaling Only)
    Ref.: L426
    Remote control unit for 1 zone that establishes data signaling between the elements of a call point and the control center. Allows connection of call and presence mechanisms and hallway signaling lamps. Surface installation. Black metallic finish. Dimensions 102 x 102 x 23 mm.
    V.A.T. included
    Consult
    SMC™ UR-4 4 Zone Remote Control Unit with Audio Control [L422]
    SMC™ UR-4 4 Zone Remote Control Unit with Audio Control
    Ref.: L422
    Control electronics that establish communication between the elements of four call points and the control center. It allows the connection of the call and presence mechanisms, the intercom and the corridor signaling lamp.
    V.A.T. included
    Consult
    SMC™ UR Remote Control Unit for 1 Zone with Audio Control [L420]
    SMC™ UR Remote Control Unit for 1 Zone with Audio Control
    Ref.: L420
    Control electronics that establish communication between the elements of a call point and the control center. It allows the connection of the call and presence mechanisms, the intercom and the corridor signaling lamp.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved