English
Español
  • Search
    • +34 902930427

    0.00 €

    Analog Intercommunication

    Products 707
    FERMAX® Electronic Call Multiplier [2340]
    FERMAX® Electronic Call Multiplier
    Ref.: 2340
    Increase the level of call volume in facilities with a large number of telephones or monitors in the same home (more than 5).
    V.A.T. included
    40.73 €
    FERMAX® Telephone Call Extender with Buzzer [2068]
    FERMAX® Telephone Call Extender with Buzzer
    Ref.: 2068
    Equipment that allows you to hear the doorbell / video door entry call bell from a different place from where the telephone or monitor is located. Conventional System: it uses common wires for the entire installation plus 1 call wire (or callback) per dwelling. Recommended in small / medium size buildings (up to 50 neighbors approx.), With several entrances and a concierge center. For urbanizations with general entrance and inner blocks.
    V.A.T. included
    35.94 €
    FERMAX® Telephone Call Extension [2040]
    FERMAX® Telephone Call Extension
    Ref.: 2040
    Equipment that allows you to hear the doorbell / video door entry call bell from a different place from where the telephone or monitor is located. Conventional System: it uses common wires for the entire installation plus 1 call wire (or callback) per dwelling. Recommended in small / medium size buildings (up to 50 neighbors approx.), With several entrances and a concierge center. For urbanizations with general entrance and inner blocks.
    V.A.T. included
    38.33 €
    FERMAX® Relay with Additional Features [ 2013]
    FERMAX® Relay with Additional Features
    Ref.: 2013
    Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.
    V.A.T. included
    49.11 €
    FERMAX® Video Signal Amplifier [4110]
    FERMAX® Video Signal Amplifier
    Ref.: 4110
    The Video Amplifier Ref. 4110 is a device that “regenerates” the video signal when the image begins to deteriorate from some point in the installation. Adjust the gain of the Video Amplifier until you get a sharp image.
    V.A.T. included
    Consult
    FERMAX® CITYMAX™ MDS Digital Concierge [2537]
    FERMAX® CITYMAX™ MDS Digital Concierge
    Ref.: 2537
    The new CityMax concierge unit has a 4'' screen, dial pad (located under the telephone arm) and quick access buttons to functions for easy and comfortable management of the installation and the concierge. Extra-flat format, made of high impact ABS plastic and with a mirror polished finish for easy cleaning. Includes table stand. Allows surface installation.
    V.A.T. included
    Consult
    FERMAX® CITYMAX™ VDS Concierge [2536]
    FERMAX® CITYMAX™ VDS Concierge
    Ref.: 2536
    The new CityMax concierge unit has a 4'' screen, dial pad (located under the telephone arm) and quick access buttons to functions for easy and comfortable management of the installation and the concierge. Extra-flat format, made of high impact ABS plastic and with a mirror polished finish for easy cleaning. Includes table stand. Allows surface installation.
    V.A.T. included
    1,406.33 €
    FERMAX® VDS Concierge Connection Module [2492]
    FERMAX® VDS Concierge Connection Module
    Ref.: 2492
    It is required to install a VDS concierge in an installation with entrance panels. The installation if it is video must be developed with coaxial cable. This module should not be used without this type of cable.
    V.A.T. included
    149.74 €
    FERMAX® MDS Direct/CITY™ 1-Access Switch [2443]
    FERMAX® MDS Direct/CITY™ 1-Access Switch
    Ref.: 2443
    Changer module for MDS CITY / DIRECT installations with more than one video access. Its function is to connect the monitor of the house with the plate from where the call is being made. 1 changer is required for each additional video door entry access.
    V.A.T. included
    Consult
    FERMAX® VDS Light/Bell Activator [2438]
    FERMAX® VDS Light/Bell Activator
    Ref.: 2438
    For installations that require high-power indications when a call is received. This equipment can activate a bell, a sounder or a light bulb when the call button of the entrance panel is pressed. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.
    V.A.T. included
    Consult
    Decoder FERMAX® VDS/MDS [2409]
    Decoder FERMAX® VDS/MDS
    Ref.: 2409
    The MDS / ADS decoder converts the MDS system from the general input to the ADS system of the interior blocks. One MDS / ADS decoder per block is required. The MDS / ADS decoder can manage from 1 to 199 homes per block. From the MDS general entrance, communication can be established with any home in the different blocks. The MDS / ADS Decoder, in addition to the interface between the two systems, acts as an audio changer, which when idle (without communication with a general entrance or MDS concierge) allows communication to be established between the ADS interior panels and the houses in the corresponding block. In this way it is possible to hold simultaneous conversations in different blocks, each with its internal plate, in addition to a block with the general entrance.
    V.A.T. included
    Consult
    FERMAX® MDS Repeater [2339]
    FERMAX® MDS Repeater
    Ref.: 2339
    To regenerate the digital signal of the BUS of boards or decoders that is transmitted by the twisted pair of the installation. Required: (1) When the BUS length is greater than 1200m: One repeater every 1200m. (2) When there are more than 120 Decoders.
    V.A.T. included
    Consult
    FERMAX® MDS Fiber Optic Converter [1345]
    FERMAX® MDS Fiber Optic Converter
    Ref.: 1345
    For transmission of MDS signals (audio, video and data) by means of fiber optic cable (single-mode fiber with FC / PC connectors). Includes Tx, Rx and PSUs.
    V.A.T. included
    Consult
    FERMAX® 4+N/MDS Mini Decoder [1300]
    FERMAX® 4+N/MDS Mini Decoder
    Ref.: 1300
    They are responsible for routing and transmitting the audio from a street panel to the corresponding housing terminal and vice versa. Each of the decoder outputs are programmed with a 4-digit MDS address. This address identifies the housing terminal connected to each exit, differentiating it from the rest of the installation's terminals. When making a call from an entrance panel, the MDS address corresponding to the marked dwelling is generated, so that only the decoder that has a programmed exit with the generated MDS address will establish communication between the entrance panel and the dwelling.
    V.A.T. included
    129.37 €
    FERMAX® VEO-XS™ DDA WIFI DUOX™ 4.3'' Monitor [9459]
    FERMAX® VEO-XS™ DDA WIFI DUOX™ 4.3'' Monitor
    Ref.: 9459
    VEO-XS DDA WIFI is equipped with a Wi-Fi connection that allows calls to be forwarded to mobile devices. Thanks to the Fermax BLUE application, available for free in the Play Store and App Store, the functions of the video door entry unit can be managed directly from a mobile or tablet, to connect to your home, wherever you are.
    V.A.T. included
    365.36 €
    FERMAX® VEO-XS™ DDA DUOX™ 4.3'' Monitor [9458]
    FERMAX® VEO-XS™ DDA DUOX™ 4.3'' Monitor
    Ref.: 9458
    The VEO-XS DDA DUOX hands-free monitor is characterized by its small size and thickness, extra-flat. Thanks to its OSD menu and the layout of the buttons, its interaction with the user is simple and intuitive. Made of high impact ABS plastic. Textured finish for easy cleaning and UV protection to make it more resistant to sunlight. Includes a 4.3'' widescreen color display (16: 9). Its balanced design of pure lines is distinctive, modern and minimalist.
    V.A.T. included
    263.54 €
    FERMAX® VEO™ DDA WIFI DUOX™ 4.3'' Monitor [9456]
    FERMAX® VEO™ DDA WIFI DUOX™ 4.3'' Monitor
    Ref.: 9456
    VEO DDA WIFI is equipped with a Wi-Fi connection that allows calls to be forwarded to mobile devices. Thanks to the Fermax BLUE application, available for free in the Play Store and App Store, the functions of the video door entry unit can be managed directly from a mobile or tablet, to connect to your home, wherever you are.
    V.A.T. included
    335.41 €
    FERMAX® VEO™ DDA DUOX™ 4.3'' Monitor [9455]
    FERMAX® VEO™ DDA DUOX™ 4.3'' Monitor
    Ref.: 9455
    The VEO DDA DUOX hands-free monitor is characterized by its small size and thickness, extra-flat. Thanks to its OSD menu and the layout of the buttons, its interaction with the user is simple and intuitive. Made of high impact ABS plastic. Textured finish for easy cleaning and UV protection to make it more resistant to sunlight. Includes a 4.3'' widescreen color display (16: 9). Its balanced design of pure lines is distinctive, modern and minimalist.
    V.A.T. included
    233.59 €
    FERMAX® VEO-XS™ WIFI 4.3'' Monitor [9449]
    FERMAX® VEO-XS™ WIFI 4.3'' Monitor
    Ref.: 9449
    VEO-XS WIFI is equipped with a Wi-Fi connection that allows calls to be forwarded to mobile devices. Thanks to the Fermax BLUE application, available for free in the Play Store and App Store, the functions of the video door entry unit can be managed directly from a mobile or tablet, to connect to your home, wherever you are.
    V.A.T. included
    353.38 €
    FERMAX® VEO-XS™ DUOX™ 4.3'' Monitor [9448]
    FERMAX® VEO-XS™ DUOX™ 4.3'' Monitor
    Ref.: 9448
    The VEO-XS DUOX hands-free monitor is characterized by its small size and thickness, extra-flat. Thanks to its OSD menu and the layout of the buttons, its interaction with the user is simple and intuitive. Made of high impact ABS plastic. Textured finish for easy cleaning and UV protection to make it more resistant to sunlight. Includes a 4.3'' widescreen color display (16: 9). Its balanced design of pure lines is distinctive, modern and minimalist.
    V.A.T. included
    251.56 €
    FERMAX® VEO / VEO-XS™ DUOX™ Connector [9447]
    FERMAX® VEO / VEO-XS™ DUOX™ Connector
    Ref.: 9447
    For mounting the monitor on the wall surface. Product measurements: 14.7 x 10 x 1.35 cm.
    V.A.T. included
    15.57 €
    FERMAX® VEO™ WIFI 4.3'' Monitor [9446]
    FERMAX® VEO™ WIFI 4.3'' Monitor
    Ref.: 9446
    VEO WIFI is equipped with a Wi-Fi connection that allows calls to be forwarded to mobile devices. Thanks to the Fermax BLUE application, available for free in the Play Store and App Store, the functions of the video door entry unit can be managed directly from a mobile or tablet, to connect to your home, wherever you are. The VEO WIFI DUOX monitor is made of high impact ABS plastic. Includes a 4.3'' widescreen color display (16: 9). The unique and exclusive design of the handset incorporates a magnet that makes it easy for the user to position it, ensuring a correct hanging at the end of the conversation. Its balanced design of pure lines is distinctive, modern and minimalist.
    V.A.T. included
    323.43 €
    FERMAX® VEO™ DUOX™ 4.3'' Monitor [9445]
    FERMAX® VEO™ DUOX™ 4.3'' Monitor
    Ref.: 9445
    The VEO monitor is made of high impact ABS plastic. Textured finish for easy cleaning and UV protection to make it more resistant to sunlight. VEO includes a 4.3'' (16: 9) widescreen color display. The unique and exclusive design of the handset incorporates a magnet that makes it easy for the user to position it, ensuring a correct hanging at the end of the conversation. Its balanced design of pure lines is distinctive, modern and minimalist. VEO is integrated into the environment.
    V.A.T. included
    221.61 €
    FERMAX® DUOX™ Camera Interface [9444]
    FERMAX® DUOX™ Camera Interface
    Ref.: 9444
    The Duox Camera Interface is a device that allows analog composite video CCTV cameras to be integrated into a Duox installation. Transforms the analog composite video signal (1 Vpp, 75 ohm) from a camera (PAL / NTSC) into a Duox signal that connects directly to the Duox bus. An interface will be required for each camera installed in the Duox installation. Each camera must be powered externally with its additional feeder. The interface will be powered directly from the Duox bus.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved