English
Español
  • Search
  • 0.00 €

    Networking

    Products 835
    UTEPO® 1 Port Over Coaxial (1,200 m) or Ethernet (700 m) Extender (Transmitter / Receiver) [UTP7301EOC]
    UTEPO® 1 Port Over Coaxial (1,200 m) or Ethernet (700 m) Extender (Transmitter / Receiver)
    Ref.: UTP7301EOC
    Transmitter (IPC) and receiver (SV) set, for IP transmission over long cable runs. It can reach 1200 meters over coaxial cable, or 700 meters over category 5E UTP cable. Bidirectional 50 Mbps bandwidth. 12VDC, 2W power (requires transmitter and receiver power). Transmitter and receiver power supplies included. Dimensions: 63.2 x 82 x 25 mm.
    V.A.T. included
    240.71 €
    TBK® 1 Port Over Coaxial (1,200 m) or Ethernet (700 m) Extender (Transmitter / Receiver) [TBK-T1000POE]
    TBK® 1 Port Over Coaxial (1,200 m) or Ethernet (700 m) Extender (Transmitter / Receiver)
    Ref.: TBK-T1000POE
    Transmitter (IPC) and receiver (SV) set, for IP transmission and power. It can reach 1200 meters over coaxial cable (without splices), or 700 meters over category 5E UTP cable (without splices). Bidirectional bandwidth between 50 and 90 Mbps (depending on distance). The SV unit is powered by POE (or by 48-54VDC source, not included), and provides power to the IPC unit as well as the camera via POE. Dimensions: 63.2 x 82 x 25 mm.
    V.A.T. included
    253.52 €
    TBK® 1 Port PoE Over Coaxial (500m) or Ethernet (400m) Extender (Transmitter / Receiver) [TBK-T500POE]
    TBK® 1 Port PoE Over Coaxial (500m) or Ethernet (400m) Extender (Transmitter / Receiver)
    Ref.: TBK-T500POE
    Transmitter (IPC) and receiver (SV) set, for IP transmission and power. It can reach 500 meters over coaxial cable (without splices), or 400 meters over UTP category 5E cable (without splices). Bidirectional bandwidth between 50 and 90 Mbps (depending on distance). The SV unit is powered by POE (or by 48-54VDC source, not included), and provides power to the IPC unit as well as the camera via POE. Dimensions: 63.2 x 82 x 25 mm.
    V.A.T. included
    257.04 €
    AVIGILON™ (UK) Injector PoE+ [POE-INJ2-PLUS-UK]
    AVIGILON™ (UK) Injector PoE+
    Ref.: POE-INJ2-PLUS-UK
    Single Port Injector, Gigabit 802.3af PoE Plus injector, Class 4 - UK power cord. Transmission standard: Gigabit Ethernet. Max. PoE power: 30 W. Number of ports PoE: 1. Voltage type: AC. Mounting method: Free-standing. Width: 53 mm.
    V.A.T. included
    99.95 €
    AVIGILON™ (EU) Injector PoE+ [POE-INJ2-PLUS-EU]
    AVIGILON™ (EU) Injector PoE+
    Ref.: POE-INJ2-PLUS-EU
    Single Port Injector, Gigabit 802.3af PoE Plus injector, Class 4 - EU power cord. Transmission standard: Gigabit Ethernet. Max. PoE power: 30 W. Number of ports PoE: 1. Voltage type: AC. Mounting method: Free-standing. Width: 53 mm.
    V.A.T. included
    99.95 €
    PULSAR® Splitter PoE [SP-POE12]
    PULSAR® Splitter PoE
    Ref.: SP-POE12
    Power supply: 44÷57VDC. Power supply output: 12VDC / 1,25Amp. Input connector: RJ45 socket. Output connector: Power supply 12VDC - JACK 5,5/2,1 plug. Data – RJ45 plug. Input power supply pairs: 1/2(+) 3/6(-) or / and 4/5(+) 7/8(-). Efficiency: 84%. Protections: OLP, SCP. Dimensions: L=86 W=30 H=25 mm. Designed for 10Mbit/s and 100Mbit/s network. Operation with PoE switches (standard PoE – IEEE802.3af/at). Operation with passive PoE switches (supplied pairs: 4/5 and 7/8).
    V.A.T. included
    21.60 €
    Set of Adapters PULSAR® with RJ45 or 2.1 / 5.5 Connectors [P-POE1]
    Set of Adapters PULSAR® with RJ45 or 2.1 / 5.5 Connectors
    Ref.: P-POE1
    Set is used to transmit TCP IP signal and power supply using one twisted pair cable. Connector for twisted pair cable: RJ45 socket (TCP IP and power supply). TCP IP data transmission: 1-2 and 3-6 pairs. Power transmission: 4-5 and 7-8 pairs. TCP IP Input / Output connector: RJ45 plug. Power Supply Input / Output Connector: 2.1/5.5 JACK socket / 2.1/5.5 JACK plug. Dimensions: W=190 H=21 D=21 mm. A set consists of two PoE adapters (input, output).
    V.A.T. included
    4.32 €
    PULSAR® Splitter 2xRJ45 (Plug) - 1xRJ45 (Socket) [P-POE2]
    PULSAR® Splitter 2xRJ45 (Plug) - 1xRJ45 (Socket)
    Ref.: P-POE2
    Splitter P-POE2 enables transfer of power and data to two IP PoE cameras or other devices, that are compliant with this standard, using UTP twisted pair cable cat5e. Connector for twisted pair cable: RJ45 socket (TCP IP and power supply). Connectors – PoE switch: 2 x RJ45 plug. Connectors – IP cameras – PoE: 2 x RJ45 plug. TCP IP data transmission: 1-2 and 3-6 pairs. Power transmission: 1-2 and 3-6 pairs. Dimensions: W=120 H=19 D=19 mm. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    10.93 €
    1 Port High PoE GV-PA901 Injector (90W) [84-PA90100-001D]
    1 Port High PoE GV-PA901 Injector (90W)
    Ref.: 84-PA90100-001D
    The GV-PA901 is a Power over Ethernet (PoE) adapter designed to provide power to the IP camera through a single Ethernet cable. Adopting the PoE adapter enables you to mount an IP camera anywhere in a building where power outlets are not available.
    V.A.T. included
    Consult
    GEOVISION™ GV-PA191 1 Port PoE Injector (19W) [55-PA191-100D]
    GEOVISION™ GV-PA191 1 Port PoE Injector (19W)
    Ref.: 55-PA191-100D
    The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an IP device anywhere in a building where power outlets are not available.
    V.A.T. included
    Consult
    GEOVISION™ GV-PA482 1 Port High PoE Injector (120W) [84-PA48200-010D]
    GEOVISION™ GV-PA482 1 Port High PoE Injector (120W)
    Ref.: 84-PA48200-010D
    The GV-PA482 is a Power over Ethernet (PoE) adapter designed to provide power to the IP camera through a single Ethernet cable. Adopting the PoE adapter enables you to mount an IP camera anywhere in a building where power outlets are not available. Compatible with GV?BX4700?E and GV?LPC1100 / 2210.
    V.A.T. included
    Consult
    GEOVISION™ GV-POEX0100 1 Port PoE Extender (100 Meters) [84-POE0100-0010]
    GEOVISION™ GV-POEX0100 1 Port PoE Extender (100 Meters)
    Ref.: 84-POE0100-0010
    GV-POEX0100 is a single-port, 10/100 PoE extender that can extend the distance between a PoE switch and a GV-IP Camera by 100 m (328.08 ft) for every extender installed. They can be serially connected, with no additional power supply, to transmit power and data to a GV-IP Camera as far as up to 600 meters (1968.5 ft) away from a PoE switch.
    V.A.T. included
    Consult
    PULSAR® 1-Port (Out) PoE Extender - Hermetic Enclosure [EXT-POE1H]
    PULSAR® 1-Port (Out) PoE Extender - Hermetic Enclosure
    Ref.: EXT-POE1H
    Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port. Protections: OLP, SCP. Operating temperature: -25°C÷50°C. Dimensions: W=158 H=118 D=77 [+/- 2mm]. The number of cable glands/cable diameter: 4pcs. / 4÷8mm. Hermetic enclosure IP56, surface mounted enclosure, locking – bolted. Pole mounting option (requires the OZB1 adapter - optional accessory). Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    Consult
    PULSAR® 2-Ports (Out) PoE Extender (Requires External PSU) [EXT-POE4]
    PULSAR® 2-Ports (Out) PoE Extender (Requires External PSU)
    Ref.: EXT-POE4
    Increases Ethernet and PoE power range by 100 meters. Power input: 44÷57VDC. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - not compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    60.48 €
    PULSAR® 3-Ports (Out, 2-Ports PoE Only) PoE Extender [EXT-POE3]
    PULSAR® 3-Ports (Out, 2-Ports PoE Only) PoE Extender
    Ref.: EXT-POE3
    Increases Ethernet and PoE power range by 100 meters. Allows connecting three IP-PoE cameras using a single cable. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af/at. PoE OUT3 – not compliant with IEEE802.3af. Output current PoE OUT: 0.6Amp/port – OUT1/2; 0.3Amp/port – OUT3 (?0.6Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    71.66 €
    PULSAR® 2-Ports (Out) PoE Extender [EXT-POE2]
    PULSAR® 2-Ports (Out) PoE Extender
    Ref.: EXT-POE2
    Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    71.66 €
    PULSAR® 1-Port (Out) PoE Extender [EXT-POE1]
    PULSAR® 1-Port (Out) PoE Extender
    Ref.: EXT-POE1
    Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port. Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    Consult
    PLANET™ Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95W) [POE-175-95]
    PLANET™ Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95W)
    Ref.: POE-175-95
    2 RJ45 interfaces: 1-port Data + Power output. 1-port Data input. 1 x DC 52~56V input power socket. 1 PoE mode (standard/legacy) DIP switch. Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE. Supports PoE power up to 95 watts for PoE port. Auto-detection of PoE IEEE 802.3af/at/bt equipment and devices from being damaged by incorrect installation. Monitor the status of the total PoE usage in real time. Auto-detection of DC input voltage. Remote power feeding up to 100m.
    V.A.T. included
    291.71 €
    SYSAWAY© 2024 All rights reserved