Speaker 2" with ABS grille and frame for standard flush box. Power rating of 8 W, 8 ohms impedance and a frequency response from 150 to 16,000 Hz. Dimensions 50 mm (diameter) and 39 mm (depth).

This Wall Mount Speaker can be installed easily on the wall with help of the plug-in speaker receptacle. It incorporates attenuator for volume control, with connection to systems of 2 or 3 threads. 120 to 18.000 Hz Frequency Response. 90 dB (1 W, 1 m, 1 kHz) sensivity. White HIP resin enclosure and steel grille. Dimensions: 219 x 330 x 80 mm. Weight: 1,3 kg.

This Wall Mount Speaker can be installed easily on the wall with help of the plug-in speaker receptacle. 6 W RMS rated input for 100 V line with 6 and 3 W selectable power. 120 to 18.000 Hz Frequency Response. 90 dB (1 W, 1 m, 1 kHz) sensivity. White HIP resin enclosure and steel grille. Dimensions: 219 x 330 x 80 mm. Weight: 1,3 kg.

Wall Mount Speaker, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. 6 W RMS rated input for 100 V line with 6, 3, 1,5 and 0,8 W selectable power. 150 to 20.000 Hz Frequency Response. 94 dB (1 W, 1 m, 1 kHz) sensivity. Cabinet: Particle board with pvc sheet, off-white (RAL 9010). Grille: Surface-treated steel plate net, off-white (RAL 9010). Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.

Wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker. The BS-633AT has a built-in attenuator and can be connected to a 2-wire and 3-wire systems. 6 W RMS rated input for 100 V line with 6 and 3 W selectable power. 120 to 15.000 Hz Frequency Response. 91 dB (1 W, 1 m, 1 kHz) sensivity. White ABS case. Dimensions: 173 x 195 x 101 mm. Weight: 0,81 kg.

Wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker. 6 W RMS rated input for 100 V line with 6, 3, 1,5 and 0,8 W selectable power. 120 to 15.000 Hz Frequency Response. 91 dB (1 W, 1 m, 1 kHz) sensivity. White ABS case. Dimensions: 173 x 195 x 101 mm. Weight: 0,78 kg.

Wall mount speaker of 6 W RMS of selectable power for 100 V line. Power selection of 6, 3, 1.5 and 0.8 W. Frequency response from 150 to 18,000 Hz. Sensitivity 94 dB (1 W, 1 m, 1 kHz). Maximum sound pressure 102 dB (6 W, 1 m, 1 kHz). Wooden box and metal grille black (RAL 9010). Ceramic connectors and thermal fuse. Certification for voice evacuation and alarm systems EN 54-24. Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.

Wall mount speaker of 6 W RMS of selectable power for 100 V line. Power selection of 6, 3, 1.5 and 0.8 W. Frequency response from 150 to 18,000 Hz. Sensitivity 94 dB (1 W, 1 m, 1 kHz). Maximum sound pressure 102 dB (6 W, 1 m, 1 kHz). Wooden box and metal grille white (RAL 9010). Ceramic connectors and thermal fuse. Certification for voice evacuation and alarm systems EN 54-24. Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.

Sound projector with high efficiency and directional characteristics. Dimensions 143 x 210 mm (Ø x H). They are an excellent workaround for horn-type units due to the wide frequency band. They prove to be excellent in both musical and verbal applications. They are mainly applied in circulation routes and wide area sound emission. IP66. Pendant mount.

Sound projector with high efficiency and directional characteristics. Dimensions 143 x 210 mm (Ø x H). They are an excellent workaround for horn-type units due to the wide frequency band. They prove to be excellent in both musical and verbal applications. They are mainly applied in circulation routes and wide area sound emission. IP66.

Sound projector with high efficiency and directional characteristics. Dimensions 135 x 205 mm (Ø x H). They are an excellent workaround for horn-type units due to the wide frequency band. They prove to be excellent in both musical and verbal applications. They are mainly applied in circulation routes and wide area sound emission. IP66. Pendant mount.

Sound projector with high efficiency and directional characteristics. Dimensions 135 x 205 mm (Ø x H). They are an excellent workaround for horn-type units due to the wide frequency band. They prove to be excellent in both musical and verbal applications. They are mainly applied in circulation routes and wide area sound emission. IP66.

Sound projector with high efficiency and directional characteristics. The 5 inch 2 cone wideband speakers used in this series are a great alternative solution for horn type units due to the wide frequency band. They prove to be excellent in both musical and verbal applications. They are mainly applied in circulation routes and wide area sound emission. IP66.

30 W acoustic projector in 100 V line prepared for outdoor installation (with IP66 degree of protection), with several power outlets (30, 15, 7.5 and 3.75 W). The projector has two mounting possibilities; on wall or ceiling using the swivel bracket or suspended from the ceiling with the 1 m steel cable. All mounting accessories are included with the kit. Frequency response 110 ~ 20,000 Hz, sensitivity 84 dB SPL (1 W, 1m, 1 kHz), maximum acoustic pressure 99 dB SPL (30 W, 1m, 1 kHz). Dimensions 170 x 240 mm.

30 W RMS, 100 V & 8 ohm broadband acoustic projector. Circular mouth. RAL 7035 gray. IP55. 30 W acoustic projector in 100 V line, with high sound pressure (up to 112 dB SPL) and very good sound quality. For applications where the high performance of acoustic projectors and music broadcasting is required. The loudspeaker has several power outlets and the included U-type anchor allows it to be mounted on a wall or ceiling.

30 W RMS, 100 V & 8 ohm broadband acoustic projector. Rectangular mouth. RAL 7035 gray. IP66. 30 W acoustic projector in 100 V line, with high sound pressure (up to 112 dB SPL) and very good sound quality. For applications where the high performance of acoustic projectors and music broadcasting is required. The loudspeaker has several power outlets and the included U-type anchor allows it to be mounted on a wall or ceiling.

Conical directivity acoustic projector 70º vertical and 100º horizontal a +-3dB, made of ABS for 70/100V lines, Low-loss transformer 30 / 15 / 7.5 / 3.75W @100V, 30 / 15 / 7.5 / 3.75 / 1,9W @70V, 8 ohms, Frequency response: 250-8000Hz +/- 3dB, Sensitivity: 113dB (1W 1m), Dimensions in mm (Diameter x Depth): 285 x 280, Weight: 1.85 kg, Colour: RAL: 9010, (U Bracket included)

5" metal speaker for 70/100V lines, Low-loss transformer 20 / 10W @100V, 20 / 10 / 5W @70V, Frequency response: 110-16000Hz +/- 5dB, Sensitivity: 88dB (1W 1m), Dimensions in mm (Diameter x Depth): 138 x 205, Weight: 2.2 kg, Colour: RAL: 9016. (U Bracket included)

Acoustic projector, maximum 16W , spherical enclosure, for ceiling suspended installation (4.5 m cable). With 130 mm speaker and connection to 100 V with three available powers. Made of ABS resistant to UV rays (UL 94 HB) RAL 9010. It incorporates ceramic terminals and thermal fuse. Protection IP35. Certification EN 54-24. It also complies with the British safety standard BS 5839, part 8. Sensitivity 9.9 dB (1 W, 1 m).

Pendant speaker designed for ceiling suspension installations. Considered in architectural design, it can blend in with lighting equipment. A directly-attached 5 m (16.4 ft) cable allows the speaker to be suspended from the high ceiling. The PE-304 is driven on both high-impedance (100 V and 70 V) and low-impedance (8 ?) lines. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs. Selectable power (30, 20, 15, 10 and 5 W connection). 70 to 20.000 Hz Frequency Response. 91 dB SPL 1 W, 1 m, 1 kHz sensivity. Enclosure: HIPS resin, off-white. Dimensions: Ø186 x 251 mm. Weight: 2,1 kg.

Pendant speaker designed for ceiling suspension installations. Considered in architectural design, it can blend in with lighting equipment. A directly-attached 5 m (16.4 ft) cable allows the speaker to be suspended from the high ceiling. The PE-64 is driven on high-impedance (100 V and 70 V) line. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs. Selectable power (6, 3 and 1 W connection). 100 to 18.000 Hz Frequency Response. 98 dB SPL 6 W, 1 m, 1 kHz sensivity. Enclosure: HIPS resin, off-white. Dimensions: Ø186 x 251 mm. Weight: 1,5 kg.

Projection speaker designed for ceiling and wall installations. Considered in architectural design, it can blend in with lighting equipment. The supplied swivel bracket allows for flexible speaker angle adjustment. The PJ-304 is driven on both high-impedance (100 V and 70 V) and low-impedance (8 ?) lines. The input power (impedance) can be easily changed at the upper side of the speaker. Selectable power (6, 3 and 1 W connection). 100 to 18.000 Hz Frequency Response. 91 dB SPL 1 W, 1 m, 1 kHz sensivity. 106 dB maximum SPL. Enclosure: HIPS resin, off-white. Dimensions: Ø186 x 369 mm. Weight: 2,1 kg.

Projection speaker designed for ceiling and wall installations. Considered in architectural design, it can blend in with lighting equipment. The supplied swivel bracket allows for flexible speaker angle adjustment. The PJ-64 is driven on high-impedance (100 V and 70 V) line. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs. Selectable power (30, 20 and 10 W connection). 100 to 18.000 Hz Frequency Response. 98 dB SPL 6 W, 1 m, 1 kHz sensivity. 113 dB maximum SPL. Enclosure: HIPS resin, off-white. Dimensions: Ø186 x 369 mm. Weight: 1,5 kg.

Outdoor speaker features stainless steel hardware for all-weather durability. It is designed to offer the high intelligibility of weather-resistant horns combined with the high sound quality of dynamic speakers. The CS-304 employs the rotary switch that facilitates impedance changes. It also employs a constant directivity horn for clear sound output over its horizontal range of 90?operation. 30 W RMS rated input in 100 V line, with selectable power (30, 20 and 10 W connection). 120 to 15.000 Hz Frequency Response. 98 dB SPL 1 W, 1 m, 1 kHz sensivity. 113 dB maximum SPL. Weight: 3,9 kg. Dimensions: 240 x 435 x 375 mm.