The AVIGILON™ Artificial Intelligence Appliance is Engineered for high performance , capacity and resiliency, the AI Appliance features leading CPU and GPU hardware that simultaneously support AVIGILON™ video analytics and Avigilon Appearance Search technology. Easy to deploy into an existing AVIGILON™ Control Center site. Note: Separate camera licenses are not required. All cameras are licensed via the associated ACC NVR or appliance to which the cameras are connected. Supports up to thirty 2MP streams of total video analysis throughput. Packaged in industry-standard 2U rack mount chassis with sliding rails (compatible with square and round hole racks) and cable management arm.

Digital recorder with 8 channels, supports HD-TVI, AHD, IP cameras (up to 8MP) and analog cameras on the same equipment, HD-TVI recording at resolutions up to 5MP. H.265 + / H.265 / H.264 + / H.264 encoding for the main sequence, and H.265 / H.264 for the analog camera subsequence. Auto adaptive HDTV, AHD, HDCVI and analog cameras. Full channel recording at a resolution of up to 5 MP. HDMI1 and VGA output simultaneously with a resolution of up to 1920 × 1080 and 2 independent HDMI outputs with a resolution of up to 4K (3840 × 2160). 4 HDD (up to 8 TB capacity per hard disk). 16ch simultaneous playback. Supports DS-1003KI keyboard and DS-1006KI keyboard by RS485. Supports recording activated by POS and overlaying POS information.

Digital 8-channel analog recorder, supports HD-TVI / AHD / CVI / IP / CBVS cameras and analog cameras in the same equipment, recording at 5MP / 4MP / 3MP / 1080P / 720P / WD1 / 4CIF / VGA / CIF resolution. Compression system H265, H265 +, H264, H264 +. HDMI and VGA output simultaneously and 1 x CVBS (704 x 576). 4E / 1S RCA audio. 4E / 1S of Alarm. Supports 1 hard disk of up to 8 TB, not included. Simultaneous playback of all channels. Other features: 2 x USB 2.0 + 1 x USB 3.0, RS485 port for control of domes (does not support remote keypad), Remote access through free software included, Explorer, iphone, access by static or dynamic IP. Dimensions: 315 x 242 x 45 mm. Accepts remote DS-1005KI keyboard via USB.

Digital 4-channel analog recorder, supports HD-TVI / AHD / CVI / IP / CBVS cameras and analog cameras in the same equipment, recording at 3MP / 1080P / 720P / WD1 / 4CIF / VGA / CIF resolution. Compression system H265, H265 +, H264, H264 +. HDMI and VGA output simultaneously and 1 x CVBS (704 x 576). 1E and 1S RCA audio. Supports 1 hard drive of up to 6 TB, not included. Simultaneous playback of 4 channels. Other features: 2 x USB ports, RS485 port for control of domes (does not support remote keyboard), Remote access through free software included, Explorer, iphone, access by static or dynamic IP. Dimensions: 315 x 242 x 45 mm. PoC power for cameras.

HIKVISION™ 24 channel TURBO HD Digital Recorder, supports HD, AHD, analog cameras at HD resolution up to 1080p lite and 2 IP cameras with resolution up to 5MP. H.265 Pro + compression system. Supports 2 IP cameras (up to 18 eliminating analog inputs). 1 RCA audio input and 1 output. HDMI, VGA and CVBS (BNC) monitor outputs. Supports 2 hard drives up to 10TB, not included. 16-channel simultaneous playback. Supports multiple VCA (Video Content Analytics) events for IP cameras and analog cameras. Supports line crossing detection and intrusion detection in 1 channel. Remote access through included free software, Explorer, Hik-connect, static or dynamic IP access. Other features: 2 x USB ports. It does not support remote keypad.

16-channel Digital Recorder, supports HD-TVI / AHD / CVI / CVBS cameras and analog cameras on the same equipment, recording at 1080p Lite (12ips) / 720 P / VGA / WD1 / 4CIF / CIF resolution. H.264 compression system. HDMI output, VGA, 1 input and 1 RCA audio output. Supports 1 hard drive of up to 6 TB, not included. Simultaneous playback of 8 channels. Other features: 2 x USB ports, RS485 port for control of domes (does not support remote keyboard), Remote access through free software included, Explorer, iphone, access by static or dynamic IP. Dimensions: 285 x 210 x 45 mm.

DeepInMInd Hikvision network recorder for 8 IP cameras of resolution up to 12MP. Facial recognition: capture, comparison, search. Supports 2HDD. Face recognition (capture, compare, search): up to 8 facial channels (face capture cameras), or 4 facial channels (normal cameras).

16-channel IP recorder with built-in 16-port PoE switch. Compatible with cameras up to 12 Mpx. 160 Mbps input bandwidth. H.265 +, H.264 +, H.264 compression. ONVIF protocol compatible. Dual operating system. Supports VCA events generated by the cameras (motion detection, crossover line, intrusion ...), 4 channels analysis Deep learning recognition of human body and vehicles. False alarm filtering. Smart searches, POS. USB ports for backup. HDMI (4K) and VGA monitor output. Keyboard input. 1 audio input / output. 4 alarm inputs and 1 alarm output. 1 RJ45 10/100/1000 Mbps port. Web Server and remote software. Compatible with iPhone, iPad and Android. Capacity for 2 internal S-ATA HDDs up to 8 TB (not included). Watermark. Power 220Vac, consumption 15 W (max. Without HDD). Measurements: 380 (W) x 315 (D) x 51.5 (H) mm.

IP Recorder (NVR) K-Series 8 channels. Input bandwidth of 80 Mbps. 80 Mbps (128 connections) for output transmission. Compression H.265 / H.264 / H.264 +. Simultaneous display of 8 x 1080P. Monitor outputs CVBS, HDMI (4K) and VGA. Audio: 1E / 1S. Alarms: NO Recording resolutions: 8MP / 6MP / 5MP / 4MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF. 2 x USB 2.0 port, 1 x RJ45 Ethernet 10/100/1000 Mbps, remote access through free software included, Explorer, iphone, android, access by static IP or DDNS. Dimensions 260 x 225 x 48 mm. Capacity to accommodate 1 HDD x 6 TB max. (not included).

8 channel IP recorder with 8ch PoE Switch, compatible with cameras up to 12 Mpx. 80 Mbps input bandwidth. H.265 +, H.264 +, H.264 compression. ONVIF protocol compatible. Dual operating system. Supports VCA events generated by the cameras (motion detection, crossover line, intrusion ...), 4 channels analysis Deep learning recognition of human body and vehicles. False alarm filtering. Smart searches, POS. USB ports for backup. HDMI (4K) and VGA monitor output. 1 audio input / output. Keyboard input. 4 alarm inputs and 1 relay output. 1 RJ45 10/100/1000 Mbps port. Web Server and remote software. Compatible with iPhone, iPad and Android. Capacity for 2 internal S-ATA HDDs up to 8 TB (not included). Watermark. Power 220Vac, consumption 15 W (max. Without HDD). Measurements: 380 (W) x 290 (D) x 45 (H) mm.

K Series IP Recorder (NVR). Input bandwidth of 40 Mbps. 80 Mbps (128 connections) for output transmission. Compression format: H.265/H.264/H.264+. Simultaneous display of 4 x 1080P. Monitor outputs: CVBS, HDMI (4K) and VGA. Audio: 1I/1O. Alarms: NO. Recording resolutions: 8MP / 6MP / 5MP / 4MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF. 2 x USB 2.0 port, 1 x RJ45 10/100/1000 Mbps Ethernet, remote access through free software included, Explorer, iphone, android, access by static IP or DDNS. Dimensions 260 x 225 x 48 mm. Capacity to accommodate 1 HDD x 6 TB max. (not included). Includes switch of 4 independent 10 / 100Mbps POE ports (Max 80W of consumption).

K Series IP Recorder (NVR). Input bandwidth of 40 Mbps. 80 Mbps (128 connections) for output transmission. Compression format: H.265/H.264/H.264+. Simultaneous display of 4 x 1080P. Monitor outputs: CVBS, HDMI (4K) and VGA. Audio: 1I/1O. Alarms: NO. Recording resolutions: 8MP / 6MP / 5MP / 4MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF. 2 x USB 2.0 port, 1 x RJ45 10/100/1000 Mbps Ethernet, remote access through free software included, Explorer, iphone, android, access by static IP or DDNS. Dimensions 260 x 225 x 48 mm. Capacity to accommodate 1 HDD x 6 TB max. (not included).

Set of two straps for mounting recorder. Dimensions: 1200 x 20 [+/-2 mm].

Enclosure construction is compliant with requirements of General Data Protection Regulation (GDPR), as personal data must be protected and stored securely. Surface mounted enclosure DVR/Monitor/RACK/vertical white protects recorder/monitor/switch against unauthorized access or theft. Made of 1,2 mm steel plate. In enclosure there is installed bracket with stripes for mounting recorder and another bracket for mounting monitor max. 22”. Set includes: two locks (different code), two keys/each lock, mounting plate for monitor, RACK brackets - 4U, stripes for mounting recorder, tamper switch indicating enclosure opening, screws (RAS4 – 2pcs, M4x10 - 4 pcs), three pole connector with fuse, screws for mounting power distribution unit.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 245 mm to 445 mm. Height: from 40 mm to 100 mm. External dimensions: 535 x 650 x 130 mm. Internal dimensions: 490 x 630 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

Vertical surface-mounted RACK 3U enclosure is universal solution for organizing and protecting against unauthorized access or theft of devices in RACK 19 ” standard with total height of up to 3U. It has special system for hanging devices with possibility of choosing 3 mounting heights and convenient way to remove devices from enclosure. There are also special holders for mounting straps for devices without RACK mounting standard. Inside is double ~ 230 V power socket with power connector equipped with glass fuse. Space for battery: 4x7Ah / 2x17Ah. Tamper protection: YES. Material: 1mm sheet, RAL9003 color. Closing: twisted 2x cheese screw. Distance from the wall 14mm. Working temperature: -10 ° C ÷ 40 ° C. Mounting space: 530x380x155mm. Position of RACK 19'' profiles: 380mm or 324mm or 268mm. Internal dimensions: 535x540x165mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. Dimensions: 320 x 430 x 82 + 14 mm. Dimensions of the recorder compartment: 260 x 250 x 62 mm. Material: sheet DC01 1mm. Enclosure: IP20. Distance from wall: 14 mm. Tamper protection: 1x microswitch: opening. Closing: Lock MR008. Destination: indoor. Operating temperature: -10 to +40°C

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 245 mm to 445 mm. Height: from 40 mm to 100 mm. External dimensions: 535 x 650 x 130 mm. Internal dimensions: 490 x 630 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. Dimensions: 320 x 430 x 82 + 14 mm. Dimensions of the recorder compartment: 260 x 250 x 62 mm. Material: sheet DC01 1mm. Enclosure: IP20. Distance from wall: 14 mm. Tamper protection: 1x microswitch: opening. Closing: Lock MR008. Destination: indoor. Operating temperature: -10 to +40°C

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 145 mm to 345 mm. Height: from 40 mm to 100 mm. External dimensions: 435 x 500 x 130 mm. Internal dimensions: 385 x 495 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 145 mm to 345 mm. Height: from 40 mm to 100 mm. External dimensions: 435 x 500 x 130 mm. Internal dimensions: 385 x 495 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The holder is dedicated to suspending the AWO445 or AWO447 housing. It is made of 1mm thick DC01 sheet in white, RAL9003. The set includes a set of two handles with dimensions of 405 x 110 x 60 mm.

The AWO471 metal casing is designed as components in CCTV Digital recorders. AWO471 is equipped with tamper protection: tamper-opening of the housing. An additional option is the possibility to mount the ARAW45 fan. If you want to suspend the housing (eg under the top), the AWO445BR holder is required. Material: 1,0mm sheet RAL9003 color. Class II. Dimensions: 550 x 125 x 575 mm. Closing: lockable. Distance from wall: 18 mm. Operating temperature: -10 to +40°C. Tamper: Tak. Installation: Surface. Dimensions of recorder (max): 505 x 115 x 505 mm.

The holder is dedicated to suspending the AWO471 housing. It is made of 1.5mm thick DC01 sheet in white, RAL9003. The set includes a set of two handles with dimensions of 555 x 130 x 65 mm.