To commit to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the converge of the wireless installations. 0.6 meter N-male (male pin) to N-male (male pin) Cable.

To commit to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the converge of the wireless installations. 0.6 meter N-male (female pin) to N-male (male pin) Cable.

PLANET™ WL-LTNA Lightning Arrester is a gas discharge tube suppressor featuring wide-band operation up to 6GHz. The unit features a built-in N-male (plug) to N-female (jack) connector which is suitable for outdoor wireless AP. The WL-LTNA is maintenance-free and features the best protection performance with both the highest surge current handling capability and the lowest insertion loss of only 0.2dB or less. In the event of high voltage, the lightning arrester immediately directed the high voltage surge current to the Earth, thereby limiting the voltage amplitude and protecting electrical insulation. When the over-voltage disappears, the system can be operated normally.

To commit itself to the wireless long distance connectivity, PLANET™ wireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 0.6-meter N-male (male pin) to N-female (female pin) Cable.

To commit the wireless long distance connectivity, PLANET™ WireFree provides variety of Antennas, Cables and other Accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase converge of the installations in Wireless. 6m SMA to N-type Cable.

To commit the wireless long distance connectivity, PLANET™ WireFree provides variety of Antennas, Cables and other Accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase converge of the installations in Wireless. 0.6m SMA to N-type Cable.

To commit itself to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 360 degree Horizontal Spread and 6 degree Vertical Spread. Connector: N-female. Operating environment: outdoor.

Full 360° coverage with greater penetration. To effectively eliminate Wi-Fi dead spots, PLANET™ provides 9dBi high gain omni-directional antenna, the ANT-OM9, for the users who desire to expand the wireless coverage in large indoor space. The ANT-OM9 is a 2.4GHz High Gain Desktop Antenna with adjustable angle, high-quality textures and stylish design. It effectively enhances the performance and extends the radius distance of 360-degree horizontal coverage range of 802.11n equipment including not only AP / router device but also wireless USB / PCI adapter with built-in easy-to-attach RP-SMA connector. Compatible with 2.4GHz 802.11n devices. Optimal 9dBi high gain, capable of eliminating wireless dead spots. Flexible RP-SMA plug (male) connector type fits all wireless equipment with an RP-SMA Jack (female) antenna connector. Adjustable 90-degree tilted axis for best wireless transmission. 360 degrees of wireless network coverage, no aiming required. High-quality, elegant and stylish design. No configuration or installation software required.

To commit itself to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 360 degrees Horizontal Spread & 10 degrees Vertical Spread. Connector: N-female. Operating environment: outdoor.

To commit itself to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 360 degrees Horizontal Spread & 10 degrees Vertical Spread. Connector: N-female. Operating environment: outdoor.

The PLANET™ ANT-FP23A is the 5GHz 23dBi flat panel directional antenna equipped with an N-Type Female connector. The antenna increases wireless signal coverage and improves signal strength and quality for current wireless environment. With effectively enhancing the performance and coverage range of 802.11a/n 5GHz equipments, the ANT-FP23A is quite suitable for outdoor WLAN application wireless application such as point to point connection between the warehouses. Featuring extending wireless signal coverage, improving signal strength, and quality for existing wireless environment, the PLANET™ ANT-FP23A 5GHz 23dBi flat panel directional antenna is quite suitable for outdoor WLAN application.

PLANET™ ANT-FP14AD is a 5GHz 14dBi Flat Panel Dual Polarization Directional Antenna equipped with two N-Type Female connectors. The ANT-FP14AD can increase wireless signal coverage and improve signal strength and quality for the current wireless environment. As the ANT-FP14AD can effectively enhance the performance and coverage of the 802.11a/n 5GHz facilities, it is quite suitable for outdoor wireless LAN applications, such as point-to-point connection between the warehouses. The ANT-FP14AD Dual Polarization Directional Antenna can operate in both vertical and horizontal polarization. The dual-polarized antennas are perfectly helpful for 802.11n devices in multithreaded communications. This enables the wireless device to transmit data on one polarization and receive data on the other polarization simultaneously. Obviously, all the networking equipment in the wireless network must be multithreading complaint. It thus brings users the advantage that multithreaded communications can be achieved with use of only one antenna instead of two independent (and opposite polarized) antennas.

PLANET™ ANT-FP14D is a 2.4GHz 14dBi Flat Panel Dual Polarization Directional Antenna equipped with two N-Type Female connectors. The ANT-FP14D can increase wireless signal coverage and improve signal strength and quality for the current wireless environment. As the ANT-FP14D can effectively enhance the performance and coverage of the 802.11b/g/n 2.4GHz facilities, it is quite suitable for outdoor wireless LAN applications such as point-to-point connection between the warehouses. The ANT-FP14D Dual Polarization Directional Antenna can operate in both vertical and horizontal polarization. The dual-polarized antennas are perfectly helpful for 802.11n devices in multithreaded communications. This enables the wireless device to transmit data on one polarization and receive data on the other polarization simultaneously. Obviously, all the networking equipment in the wireless network must be multithreading complaint. It thus brings users the advantage that multithreaded communications can be achieved with use of only one antenna instead of two independent (and opposite polarized) antennas.

To commit itself to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 10 degrees Horizontal Spread and 10 degrees Vertical Spread. Connector: N-female. Operating environment: outdoor.

To commit itself to the wireless long distance connectivity, PLANET™ WireFree provides a variety of antennas, cables and other accessories for 2.4GHz and 5GHz ISM band applications where more RF gain power is required to increase the convergence of the installations in the wireless state. 30 degree Horizontal Spread and 20 degrees Vertical Spread. Connector: N-female. Operating environment: outdoor.

PLANET™ WDAP-850AC 1200Mbps Dual Band 802.11ac 1200Mbps Wave 2 Outdoor Wireless AP offers a wide coverage of wireless Internet access and ultimate wireless speed. With IEEE 802.11ac Wave 2 MU-MIMO 2T2R dual-band technology, the WDAP-850AC provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz with maximum connectivity and performance for long-range coverage. It comes with the IP67-rated aluminum case protected from contact with harmful dust and waterproof. By connecting high-gain antenna through the flexible N-type connectors, the system integrator can easily assist customers in achieving various outdoor long-distance applications under rough weather in any harsh environment. The WDAP-850AC also offers the 20KV surge protection for wire cable interface that can greatly improve the durability of the product.

PLANET™ WDAP-W1200E 1200Mbps Wave 2 Dual Band 802.11ac Wireless AP supports central management through PLANET NMS controllers. With IEEE 802.11ac Wave 2 MU-MIMO 2T2R dual-band technology, the WDAP-W1200E provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz. WDAP-W1200E conforms to the standard 86-type electrical junction box and supports IEEE 802.3af/at PoE. It is suitable for in-wall installation enabling to integrate the hotel network with its all-in-one interface. The WDAP-W1200E also provides stable 2.4GHz and 5GHz wireless signals simultaneously that make access to internet viable in regard to whatever nature of work you are into.

PLANET™ WDAP-C1800AX 1800Mbps Dual Band 802.11ax Wireless AP, supporting MU-MIMO, Wave 2.0, OFDMA and Seamless Roaming technology, provides a maximum wireless speed of 1200Mbps in the 5GHz band and 600Mbps in the 2.4GHz band. The maximum number of client users is up to 250, ensuring more secure and robust connectivity with the adoption of Wi-Fi 6 technology.

PLANET™ WBS-512AC 802.11ac WAVE 2 900Mbps Outdoor Wireless CPE offers a better range and excellent throughput than those of the traditional wireless device. With the standard IEEE 802.3at Power over Ethernet (PoE) design, the WBS-512AC can be easily installed in the areas where power outlets are not available. The WBS-512AC is definitely suitable for wireless IP surveillance, and bridge link of building to building and backbone of public service. Additionally, the self-healing capability keeps connection alive all the time. With the IP55-rated outdoor enclosure, the WBS-512AC can perform normally under rigorous weather conditions, meaning it can be installed in any harsh, outdoor environments.

To fulfill the needs of long distance and higher speed required Ethernet over Coaxial or 2-wired UTP applications, PLANET™ Technology offers a new Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient. Working well with a pervasive coaxial or RJ11 network, the IVC-234GT provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.2km. If the IP network that consists of HD IP camera, wireless access point, NVR and digital signage display requires an extension of beyond the 100-meter distance, the IVC-234GT will be the best option as it can transmit data over the coaxial cable or telephone wire. A 100-meter distance can only be extended on an UTP cable.

PLANET™ MG-115A 1-port RS232/422/485 Modbus Gateway supports the standard Modbus Protocol, which makes it possible for converting any Modbus Protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. Its serial protocol can be used for industrial automation where SCADA or HMI system is in place. Moreover, its network integration can be upgraded from the SNMP network to the automated Modbus TCP network, which brings interconnection over Ethernet longer distances, thus making a network infrastructure more flexible.

PLANET™ MG-120 2-port RS232/422/485 Modbus Gateway supports the standard Modbus Protocol, which makes it possible for converting any Modbus Protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. Its serial protocol can be used for industrial automation where SCADA or HMI system is in place. Moreover, its network integration can be upgraded from the SNMP network to the automated Modbus TCP network, which brings interconnection over Ethernet longer distances, thus making a network infrastructure more flexible.

PLANET™ MG-110 1-port RS232/422/485 Modbus Gateway supports the standard Modbus Protocol, which makes it possible for converting any Modbus Protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. Its serial protocol can be used for industrial automation where SCADA or HMI system is in place. Moreover, its network integration can be upgraded from the SNMP network to the automated Modbus TCP network, which brings interconnection over Ethernet longer distances, thus making a network infrastructure more flexible.

PLANET™ has added the Industrial Modbus TCP/IP Protocol to its easily-integrated industrial management level products that come with SCADA/HMI system and other data acquisition systems on factory floors. Moreover, the industrial IT SNMP network is upgraded to the industrial automation Modbus TCP/IP network. PLANET industrial management level products with the Modbus TCP/IP Protocol offer flexible network connectivity solutions for the industrial automation environment. To complete the industrial automation environment application solution, PLANET has announced a first industrial level 4-port RS232/422/485 Modbus Gateway, IMG-2400T, a bridge that converts between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP40 metal housing.