English
Español
  • Search
    • +34 902930427

    0.00 €

    Smart City

    Products 4303
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    AmbientSystem™ 1x650W (D Class) Power Amplifier [EST-PA1650B]
    AmbientSystem™ 1x650W (D Class) Power Amplifier
    Ref.: EST-PA1650B
    D-Class power amplifier. 1 x 650 Watts. Front panel indicators include: Supply / Active / Fault, 100/50 Volts available through the terminal blocks on the rear. It is combined with the EST-PSM48 (charger and reserve source).
    V.A.T. included
    Consult
    LDA® BA-2500 2x500W Amplifier [LDABA2500S02]
    LDA® BA-2500 2x500W Amplifier
    Ref.: LDABA2500S02
    The BA-2500 Model LDA Amplifier is specially designed for professional installations where efficiency is a relevant factor. Thanks to its class D amplification technology and its switched power supply, it achieves an energy consumption efficiency of 85%, dissipating less heat and occupying only a 19 '' rack height. The BA-2500 has two channels of 500 W rms, protected against short circuit and overload, which thanks to its flexible design, allows both high-impedance public address installations at 100V and low-impedance stereo at 4 ohms. Each channel integrates a high-pass filter and an automatic stand-by per noise door, whose operation can be activated from the rear of the equipment.
    V.A.T. included
    Consult
    LDA® BA-2250 2x250W Amplifier [LDABA2250S02]
    LDA® BA-2250 2x250W Amplifier
    Ref.: LDABA2250S02
    The BA-2250 Model LDA Amplifier is specially designed for professional installations where efficiency is a relevant factor. Thanks to its class D amplification technology and its switched power supply, it achieves an energy consumption efficiency of 85%, dissipating less heat and occupying only a 19 '' rack height. The BA-2250 has two 250 W rms channels, protected against short-circuit and overload, which thanks to its flexible design, allows both high-impedance public address installations at 100V and low-impedance stereo at 8 ohms. Each channel integrates a high-pass filter and an automatic stand-by per noise door, whose operation can be activated from the rear of the equipment.
    V.A.T. included
    Consult
    BUS ACSI Adapter for LDA® ZES-22 [LDAZES22ACSIS01]
    BUS ACSI Adapter for LDA® ZES-22
    Ref.: LDAZES22ACSIS01
    Adaptation unit for ZES-22 digital matrices that allows to inject up to 8 MPS-8Z microphones with or without expansion keyboards. It has a bus power input that allows the MPS series microphones to be used without local source, only connected by bus cable. It has protection against short circuit and incorrect polarity. Docks directly onto the ZES-22 drive allowing direct connection to an ACSI bus.
    V.A.T. included
    166.51 €
    Cobranet ZES22 LDA® Audio Converter [LDAZES22S02]
    Cobranet ZES22 LDA® Audio Converter
    Ref.: LDAZES22S02
    The ZES-22 digital audio processor of the SONORA family is a versatile equipment that allows for high-performance audio installations with high flexibility in terms of size, configuration or the location of equipment in large buildings with the only requirement of have an Ethernet connection. It consists of up to 4 fully configurable audio inputs or outputs. These analog balanced audio inputs / outputs offer excellent performance through the use of quality A / D and D / A converters. The input sensitivity is adjustable and the output levels standardized for 1Vp balanced signal. It offers an extended dynamic range and gain control.
    V.A.T. included
    1,512.23 €
    LDA® SIMAX™ QX-060 Mixer Amplifier [SXQX060S02]
    LDA® SIMAX™ QX-060 Mixer Amplifier
    Ref.: SXQX060S02
    Power 60W @ 70 / 100V. Frequency response: 20-20000Hz +/- 3dB, THD <0.5%, S / N> 90dB. 5 inputs balanced XLR 10Kohms, 2 with priority. Unbalanced input type RCA or Jack (1/4 "). 7-band equalizer, independent source level adjustment per input. Siren and warning switch, active output selector, amplifier gain control. Includes expansion bay to integrate MCD and Radio + MP3 modules (USB / SD card). Indicators: Power, Clip, Signal, Protect, Vúmetro. Dimensions in mm (Height x Width x Depth): 2U 88 x 420 x 320
    V.A.T. included
    Consult
    LDA® SIMAX™ QX-240 Mixer Amplifier [SXQX240S02]
    LDA® SIMAX™ QX-240 Mixer Amplifier
    Ref.: SXQX240S02
    Power 240W @ 70 / 100V. Frequency response: 20-20000Hz +/- 3dB, THD <0.5%, S / N> 90dB. 5 balanced inputs XLR 10Kohms, 2 with priority, unbalanced input type RCA or Jack (1/4 "). 7-band equalizer, independent source level adjustment per input. Siren and warning switch, active output selector, amplifier gain control. Includes expansion bay to integrate MCD modules. Indicators: Power, Clip, Signal, Protect, Vúmetro. Dimensions in mm (Height x Width x Depth): 2U 88 x 420 x 320.
    V.A.T. included
    Consult
    TOA™ MX-6224D 2 x 240W (100V) Amplifier [Y4240MX]
    TOA™ MX-6224D 2 x 240W (100V) Amplifier
    Ref.: Y4240MX
    TOA has created the MX-6224d, an affordable digital mixing amplifier, especially for medium and small mixes. The MX-6224d is a simple and reliable system, requiring very little technical knowledge to operate, but still maintaining exceptional sound quality. 2 x 240W Digital Mixer Amplifier. Incorporation of DSP function. Class D amplifier. Reliable sound quality. Optimal digital signal processing. Easy-to-use advanced functions.
    V.A.T. included
    Consult
    TOA™ A-5012 120W RMS (100V) Amplifier [Y4120MX]
    TOA™ A-5012 120W RMS (100V) Amplifier
    Ref.: Y4120MX
    The A-5012 is a 1-unit, semi-trailer size 120W desktop amplifier. Inputs 1 and 2 can be set for MIC or LINE sound sources, and their output is compatible with high impedance (100 V and 70 V) and low impedance (4 # 9b) connections. The functions can be configured with a PC using the dedicated configuration software. The A-5012 is ideal for use as a power amplifier in small commercial facilities and conference rooms. With the use of an optional rack-mount bracket, it can be mounted in an EIA standard equipment rack (1-unit size).
    V.A.T. included
    Consult
    TOA™ A-5006 60W RMS (100V) Amplifier [Y4060MX]
    TOA™ A-5006 60W RMS (100V) Amplifier
    Ref.: Y4060MX
    The A-5006 is a 1-unit, semi-trailer size 60W desktop amplifier. Inputs 1 and 2 can be set for MIC or LINE sound sources, and their output is compatible with high impedance (100 V and 70 V) and low impedance (4 ?) connections. The functions can be configured with a PC using the dedicated configuration software. The A-5006 is ideal for use as a power amplifier in small commercial facilities and conference rooms. With the use of an optional rack-mount bracket, it can be mounted in an EIA standard equipment rack (1-unit size).
    V.A.T. included
    Consult
    TOA™ CP-9550M2 2 x 500W (4 Ohm) Digital Mixer Amplifier + Audio Matrix [Y4914L]
    TOA™ CP-9550M2 2 x 500W (4 Ohm) Digital Mixer Amplifier + Audio Matrix
    Ref.: Y4914L
    The CP-9500M2 is a compact solution for places of worship, gymnasiums or auditoriums, where sufficiently high power is required. It is designed for fixed installations with 100 volt loudspeakers. The two digital power amplifiers are quite efficient and consume less power than an equivalent analog amplifier. The number of inputs and outputs can be expanded with optional modules, as required. CP-9550M2: 2x 500 W (100 V line). Low power consumption due to efficient digital power amplifiers. Expansion of the number of inputs and outputs with optional modules, as required.
    V.A.T. included
    Consult
    TOA™ CP-9500M2 2 x 500W Digital Mixer Amplifier + Audio Matrix [Y4914H]
    TOA™ CP-9500M2 2 x 500W Digital Mixer Amplifier + Audio Matrix
    Ref.: Y4914H
    The CP-9500M2 is a compact solution for places of worship, gymnasiums or auditoriums, where sufficiently high power is required. It is designed for fixed installations with 100 volt loudspeakers. The two digital power amplifiers are quite efficient and consume less power than an equivalent analog amplifier. The number of inputs and outputs can be expanded with optional modules, as required. CP-9500M2: 2x 500 W (100 V line). Low power consumption due to efficient digital power amplifiers. Expansion of the number of inputs and outputs with optional modules, as required.
    V.A.T. included
    Consult
    TOA™ SO-MIX-T Wall Base Format Mixer [Y4783]
    TOA™ SO-MIX-T Wall Base Format Mixer
    Ref.: Y4783
    Remote Mixer, Microphone XLR Balanced Input, Euroblock Connector Line Level Output, 30 dB, 24 Volt DC, 40 Milliampere, 3.35" Width x 1.42" Depth x 3.39" Height, White. Features: Microphone and Line Level Input. Two Inputs and One Balanced Output. Individual Volume Control with Joint Bass and Treble Control. Automatic Mix with Selectable Talkover Function.
    V.A.T. included
    Consult
    TOA™ M-243 4-Channel Stereo Mixer [Y4208ME]
    TOA™ M-243 4-Channel Stereo Mixer
    Ref.: Y4208ME
    The M-243 is an EIA Standard equipment rack (1-unit size) stereo mixer that comes with two monaural inputs, four stereo inputs, one stereo output and two monaural outputs. 2 mono and 4 stereo inputs, 1 stereo and 2 mono outputs plus 1 stereo and 2 mono sub-inputs to the output mix buses. Each input can be assigned to any combination ofthe three outputs. Switchable high pass filter on each monaural input to filter out unwanted low frequencies, especially for speech use.
    V.A.T. included
    Consult
    TOA™ WP-700-AM Remote Control Panel [Y4782]
    TOA™ WP-700-AM Remote Control Panel
    Ref.: Y4782
    The WP-700-AM is a remote control switch/volume panel that designed for MA-725F (or MM-700F) amplifiers, which can remote select input source and adjust volume level through Ethernet cable connected to MA-725F (or MM-700F) amplifier. Also it can be mounted in a 1-gang electrical box (American type).
    V.A.T. included
    Consult
    TOA™ MA-725F-EB Matrix Amplifier [Y4780]
    TOA™ MA-725F-EB Matrix Amplifier
    Ref.: Y4780
    The MA-725F matrix amplifier performs matrix controls from 4 LINE plus 2 MIC/LINE level inputs to 4 output channels. Each output channel features 250W at 70V/100V class-D digital amplifier with 64 DSP preset selections for general equalizations, crossover for sub-woofer, or variety of TOA speakers EQ settings. 2 MIC/LINE inputs have 1st and 2nd priority levels which can override at assigned output channels automatically or manually. If connected with optional WP-700-AM wall remotes via CAT-5 cable, audio source selection and volume controls can be done remotely. All assignments and setups can be done by dip switches on its rear panel without a PC. This unit fits a wide range of applications that require multi-zone paging and/or background music distribution at restaurants, pubs, retail stores, factories, etc...
    V.A.T. included
    Consult
    TOA™ A-2240DD-EB Mixer Power Amplifier (CE Version) - D Class [Y104CD]
    TOA™ A-2240DD-EB Mixer Power Amplifier (CE Version) - D Class
    Ref.: Y104CD
    240 W amplifier suitable for broadcasting music and announcements. It has 3 microphone inputs, 2 auxiliary inputs and 1 recording output, in addition to the 100 V, 70 V or 4 ohm power output. The microphone inputs are symmetrical and the MIC1 input, with DIN 5P connector, includes the message priority function on the other inputs and selectable phantom power. It has a frequency response of 50 to 20,000 Hz. It incorporates volume controls, bass and treble. 230 V AC / 24 V DC, 50/60 Hz Power. Black finish. Dimensions: 420 x 100,9 x 360,3 mm (2 U).
    V.A.T. included
    Consult
    TOA™ A-2120DD-EB Mixer Power Amplifier (CE Version) - D Class [Y103CD]
    TOA™ A-2120DD-EB Mixer Power Amplifier (CE Version) - D Class
    Ref.: Y103CD
    120 W amplifier suitable for broadcasting music and announcements. It has 3 microphone inputs, 2 auxiliary inputs and 1 recording output, in addition to the 100 V, 70 V or 4 ohm power output. The microphone inputs are symmetrical and the MIC1 input, with DIN 5P connector, includes the message priority function on the other inputs and selectable phantom power. It has a frequency response of 50 to 20,000 Hz. It incorporates volume controls, bass and treble. 230 V AC / 24 V DC, 50/60 Hz Power. Black finish. Dimensions: 420 x 100,9 x 360,3 mm (2 U).
    V.A.T. included
    Consult
    TOA™ A-206DD-EB Mixer Power Amplifier (CE Version) - D Class [Y102CD]
    TOA™ A-206DD-EB Mixer Power Amplifier (CE Version) - D Class
    Ref.: Y102CD
    60 W amplifier suitable for broadcasting music and announcements. It has 3 microphone inputs, 2 auxiliary inputs and 1 recording output, in addition to the 100 V, 70 V or 4 ohm power output. The microphone inputs are symmetrical and the MIC1 input, with DIN 5P connector, includes the message priority function on the other inputs and selectable phantom power. It has a frequency response of 50 to 20,000 Hz. It incorporates volume controls, bass and treble. 230 V AC / 24 V DC, 50/60 Hz Power. Black finish. Dimensions: 420 x 100,9 x 280,3 mm (2 U).
    V.A.T. included
    Consult
    TOA™ A-2030DD-EB Mixer Power Amplifier (CE Version) - D Class [Y101CD]
    TOA™ A-2030DD-EB Mixer Power Amplifier (CE Version) - D Class
    Ref.: Y101CD
    30 W amplifier suitable for broadcasting music and announcements. It has 3 microphone inputs, 2 auxiliary inputs and 1 recording output, in addition to the 100 V, 70 V or 4 ohm power output. The microphone inputs are symmetrical and the MIC1 input, with DIN 5P connector, includes the message priority function on the other inputs and selectable phantom power. It has a frequency response of 50 to 20,000 Hz. It incorporates volume controls, bass and treble. Dimensions 420 x 100.9 x 280.3 mm. Occupies 2 units in Rack 19 ". Weight 5 kg. 230 V AC / 24 V DC, 50/60 Hz Power. Black finish.
    V.A.T. included
    Consult
    TOA™ VX-050DA Power Amplifier [Y4949W5]
    TOA™ VX-050DA Power Amplifier
    Ref.: Y4949W5
    The VX-050DA is an Digital power amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems.It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design.The VX-050DA also features standby mode to be set for reducing standby power consumption.It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.
    V.A.T. included
    Consult
    TOA™ VX-030DA Power Amplifier [Y4949W3]
    TOA™ VX-030DA Power Amplifier
    Ref.: Y4949W3
    The VX-030DA is an Digital power amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems.It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design.The VX-030DA also features standby mode to be set for reducing standby power consumption.It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.
    V.A.T. included
    Consult
    TOA™ VX-015DA Power Amplifier [Y4949W1]
    TOA™ VX-015DA Power Amplifier
    Ref.: Y4949W1
    The VX-015DA is an Digital power amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems.It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design.The VX-015DA also features standby mode to be set for reducing standby power consumption.It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.
    V.A.T. included
    Consult
    TOA™ M-164E-AE Analog Mixer [Y568AE]
    TOA™ M-164E-AE Analog Mixer
    Ref.: Y568AE
    The M-164E-AE is an affordable mixer for installation in conference rooms, restaurants or small rooms. The 16-channel mixer has 6 microphone inputs with XLR inputs and phantom power and high pass filter for high-sounding tracks and a unique design with a built-in meter bridge.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved