EN 54-4 Battery Charger Upgrade and Activation Card for ONE-500. Once activated, the card becomes a key for the charger to work permanently.

Filtered load impedance for improvement of loudspeaker line measurement accuracy on 70 / 100V lines. It allows to add precision to the connection integrity check between the speakers and the PA / VA system. It is a small device very easy to install and with a very low consumption. Multiple devices can be connected to the same line of speakers. Does not require return lines to the system.

Controller for 10 dimmer lines with remote control signal input for each line, 1 sub-D15 type control input, 1 RJ-45 type ethernet control input, 1 general dimmer activation input with loop-throw-output EUR type.

The EN 54-16 certified LDA ONE500 public address and voice alarm system ensures fast, safe and controlled emergency evacuation. ONE is the most versatile and cost effective voice and public address alarm system thanks to its innovative features, excellent audio quality and flexibility in the smallest space. It has 2 class D amplifiers, 6 zones, 3 audio inputs, 6x6 audio matrix, DSP and LCD display. The system can be configured without the need for software or a PC, thanks to its Plug & Set configuration mode for PA and VA. The audio and automatic mixing inputs provide great versatility for PA use in small installations. It incorporates EN 54-4 battery charger and works with a single 12V battery, minimizing the cost of system maintenance thanks to its advanced energy-saving control. The innovative Wall & Rack design allows for autonomous wall mounting or rack mounting.

The VCC-64 PSK Communications and Power Adapter enables the installation of LDA VCC-64 devices in the system, using a single CAT5 cable for the entire device bus. The equipment has an input for continuous power supply with a nominal voltage of 12V. It consists of a two-pole + and - female power jack connector that will be connected to the positive and negative poles of the power supply supplied with the equipment. The connection is made using a male power jack connector with an internal diameter of 2.1 mm, an external diameter of 5.5 mm and a length of 9.5 mm.

Multi-source player with DVD player, USB, SD and radio. Compatible with MP3 files. Independent outputs DVD / USB / SD and FM / AM radio. You can play music and radio in two zones at the same time. Includes mixed RCA audio .output. Independent volume controllers by output. Supports CDs, videos on DVD and JPEG images. Includes high-speed USB 2.0 port and SD cards. RS-485 remote control interface. Power supply 230V AC 50 / 60Hz. 1U of rack. Dimension 482 x 44 x 252 mm

It adds 8 extra programmable buttons that can be asigned to different zones by the configuration software. It includes transparent cover for zone's names indication. Up to 7 VAP-8K units per VAP-1 panel.

The Voice Alarm Panel VAP 1 is designed to provide NEO with evacuation system controls for different areas. It allows to know the condition of the system and broadcast both live and pre-recorded alarm and evacuation warnings through up to 56 selection memories of evacuation zones. This is possible because it can equip up to 7 expansion keyboards with 8 zone memories each one. Moreover, expansion keyboards available allow it to adjust to the special features of each system.

The VCC-64 allows up to 99 programmable channels and volume control (0-9). Usually installed in local zone and connected via bus to the system, it offers source selection, volume control and lock function. Installation in local zone and connected via bus to the system. 99 programmable channels. Volume control (0-9). Bus RS-485. 4 P terminal block. DIP switch. LCD Display of 2x8 character type.

It provides an accurate measurement of the speakers line impedance in order to test the integrity of the connection between the speakers and the PA/VA system. It is a compact device very simple to install in 100V or 70V lines. It has a low power consumption and several devices can be connected to the same speakers line.

It adds 8 extra programmable buttons that can be asigned to different zones by the configuration software. It includes transparent cover for

4 class D amplifiers of 500W at 4 Ohms. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 16 attenuators LDA AT6. 6 supervised contact relays for integration with Fire Alarm Control Panel.

The amplification extension for the LDA NEO Evacuation Voice Alarm System includes 8 class D amplifiers of 250W per channel in 100V / 70V lines. Allows A + B connection. 8 pre-amplified outputs. Balanced audio Triple Ethernet port for Cobranet Digital Audio transmission, remote control and supervision as well as redundant cascade connection with NEO or other NEO Extensions.

4 class D amplifiers of 500W or 2 amplifiers of 1000W for 100V/70V lines. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 16 attenuators LDA AT6. 6 supervised contact relays for integration with Fire Alarm Control Panel.

LDA NEO Extension 4250 is an extension controller and a 4x500W amplifier or 2x1000W amplifier for the compact EN 54-16 PA/VA system NEO. 4 amplifiers of 500W or 2 amplifiers of 1000W for 100V/70V lines. 4 pre-amp outputs for external PA amplifiers connection. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each output channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). Control for up to 32 attenuators LDA AT6. Integrated frontal loudspeaker for monitoring. 12 supervised contact relays for integration with Fire Alarm Control Panel.

LDA NEO 8060 is a compact EN 54-16 certified PA/VA system that ensures a ensures a fast, safe and controlled emergency evacuation. 5 audio inputs. 8 class D amplifiers with two configurations for 100V/70V lines: 8 class D amplifiers of 120W per channel or 4 class D amplifiers of 250W per channel. Audio Matrix 7x8 (digital up to 39x2014). 8 pre-amp outputs for external PA amplifiers connection. Up to 8 multi-zone microphones MPS-8Z or VAP-1 panels connected with CAT5 UTP cable. DSP: 7-band input/output Parametric Equalizer, loudness, LDA sound enhancer, independent volume control per each I/0 channel and audio filters. Triple Ethernet port: for Digital Audio Cobranet, remote control and supervision, and for escalating the system with NEO-Extensions in daisy-chain mode with Flexnet techlogy (up to 1024 zones). 4,3" Frontal touch screen with access control. 4GB of internal memory for pre-recorded messages. Integrated emergency microphone. Control for up to 32 attenuators LDA AT6. Integrated frontal loudspeaker for monitoring. 22 GPIO ports (8 supervised for integration with Fire Alarm Control Panel).

Module to monitor the status of the loudspeaker line. It connects in parallel to the last speaker on the line and emits a non-audible 20 kHz tone that is used to detect anything from an impedance change to a short or open line. It prevents any connection error and line impedance variation due to aging of the installation and weather conditions. It also incorporates a thermal fuse that reduces the risk of a short circuit in the event of fire: at 135ºC it burns and causes an open circuit error on the line. Supplied in sets of 10 units.

4EVAC-RS422 Adapter Cable for PC Connection.

Remote contact interface with following hardware configuration EN54-16; DIN-RAIL. Max. of 2x GPIO sharing 1x L-Net connection for communication and power purpose (Without additional 24VDC power Injector). 16 programmable monitored inputs. 16 programmable outputs. 2W DC aux output (max. 200mA @ 24VDC). Firemens microphone input, 4E-FMP. RS485 datalink with: (1) Balanced analogue audio input, (2) General Fault and EVAC status output, (3) Redundant L-Net link (max. 250m), 2xRJ45 (4) Addressable: 0-255.

The 4E-SW6 switch module routes evacuation and / or alert messages, location and music announcements (BGM) to six lines of loudspeakers. Adding more 4ESW6 switch modules adds to the system the ability to get any multiple of six speaker lines, grouped into virtual zones / groups. By adding end-of-line (EOL) modules to the loudspeaker lines, the 4E-SW6 monitors and detects faults as indicated in the EN 54 standard. Dimensions 65 x 90 x 118 mm.

2 x 500 W RMS class D power stage with 4 A battery charger, managed from the 4EVAC-IMPACT system control unit. Up to 16 power stages with a total of 16,000 W can be used in an installation. To subdivide the power, the 4E-SW6 modules allow the creation of additional subzones. It occupies 2 units of rack height.

Controller of the IMPACT system that manages the audio signals according to the assigned priority level, sends them to the DCA 2,500 amplifiers. 2 x 500 W, assigning them to their output channels A or B. The unit can manage up to 16 power stages with a total of 16,000 W. If it is necessary to subdivide the power, the 4E-SW6 modules are used for additional subzones, managed also by the controller. It can be expanded via the local network to connect, for example, microphone desks, or via two global network connections that allow multiple IMPACT and C500 systems to be linked. It occupies 1 unit of rack height.

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).

All-in-one voice alarm and evacuation system, with the simplicity of independent equipment and the benefits of a network topology to link and expand the system. Each C500 manages 6 audio streams that can be output simultaneously on the 6 speaker lines connected to the 100 W RMS power units. For global announcements, the C500s are linked in a network, by means of a redundant loop, with 2 audio channels and a serial data channel (RS485).