English
Español
  • Search
  • 0.00 €

    Smart City

    Products 4303
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    FERMAX® MARINE™ ST4Visor [4704]
    FERMAX® MARINE™ ST4Visor
    Ref.: 4704
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.
    V.A.T. included
    419.27 €
    FERMAX® MARINE™ ST3 Visor [4703]
    FERMAX® MARINE™ ST3 Visor
    Ref.: 4703
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.
    V.A.T. included
    274.32 €
    FERMAX® MARINE™ ST2 Visor [4702]
    FERMAX® MARINE™ ST2 Visor
    Ref.: 4702
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.
    V.A.T. included
    209.63 €
    FERMAX® MARINE™ ST1 Visor [4701]
    FERMAX® MARINE™ ST1 Visor
    Ref.: 4701
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.
    V.A.T. included
    165.31 €
    FERMAX® MARINE™ Memokey Keypad [ 4699]
    FERMAX® MARINE™ Memokey Keypad
    Ref.: 4699
    Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages.
    V.A.T. included
    525.88 €
    FERMAX® MARINE™ ST4 Surface Box [4648]
    FERMAX® MARINE™ ST4 Surface Box
    Ref.: 4648
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    511.50 €
    FERMAX® MARINE™ ST3 Surface Box [4647]
    FERMAX® MARINE™ ST3 Surface Box
    Ref.: 4647
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    404.89 €
    FERMAX® MARINE™ ST2 Surface Box [4646]
    FERMAX® MARINE™ ST2 Surface Box
    Ref.: 4646
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    341.40 €
    FERMAX® MARINE™ ST1 Surface Box [4645]
    FERMAX® MARINE™ ST1 Surface Box
    Ref.: 4645
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    295.88 €
    FERMAX® MARINE™ ST4 Flush Mount Box [4644]
    FERMAX® MARINE™ ST4 Flush Mount Box
    Ref.: 4644
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.
    V.A.T. included
    89.84 €
    FERMAX® MARINE™ ST3 Flush Mount Box [4643]
    FERMAX® MARINE™ ST3 Flush Mount Box
    Ref.: 4643
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.
    V.A.T. included
    74.27 €
    FERMAX® MARINE™ ST2 Flush Mount Box [4642]
    FERMAX® MARINE™ ST2 Flush Mount Box
    Ref.: 4642
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.
    V.A.T. included
    68.28 €
    FERMAX® MARINE™ ST1 Flush Mount Box [4641]
    FERMAX® MARINE™ ST1 Flush Mount Box
    Ref.: 4641
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.
    V.A.T. included
    59.90 €
    FERMAX® 8-Call Extension Module [2008]
    FERMAX® 8-Call Extension Module
    Ref.: 2008
    Call extension module, for VDS City and MDS City panels. It is installed inside the embedding box.
    V.A.T. included
    40.73 €
    FERMAX® 16-Call Extension Module [2441]
    FERMAX® 16-Call Extension Module
    Ref.: 2441
    Call extension module, for VDS City and MDS City panels. It is installed inside the embedding box.
    V.A.T. included
    57.50 €
    MARINE™ FERMAX® Flush Box Separator Set [2289]
    MARINE™ FERMAX® Flush Box Separator Set
    Ref.: 2289
    Set of dividers for embedding boxes.
    V.A.T. included
    5.99 €
    FERMAX® MARINE™ VDS™ ST1 AP 201 Audio Entry Panel - 2 Push Buttons [54343]
    FERMAX® MARINE™ VDS™ ST1 AP 201 Audio Entry Panel - 2 Push Buttons
    Ref.: 54343
    Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number.
    V.A.T. included
    474.37 €
    FERMAX® MARINE™ VDS™ ST1 AP 101 Audio Entry Panel - 1 Push Button [54333]
    FERMAX® MARINE™ VDS™ ST1 AP 101 Audio Entry Panel - 1 Push Button
    Ref.: 54333
    Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number.
    V.A.T. included
    434.84 €
    SYSAWAY© 2024 All rights reserved