English
Español
  • Search
    • +34 902930427

    0.00 €

    Smart City

    Products 4303
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    FERMAX® CITY™ S6 Double Frame [8429]
    FERMAX® CITY™ S6 Double Frame
    Ref.: 8429
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions: 355(H) x 460(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S5 Double Frame [8428]
    FERMAX® CITY™ S5 Double Frame
    Ref.: 8428
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions: 355(H) x 385(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S4 Double Frame [8427]
    FERMAX® CITY™ S4 Double Frame
    Ref.: 8427
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions: 355(H) x 385(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S8 Double Vizor [8415]
    FERMAX® CITY™ S8 Double Vizor
    Ref.: 8415
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 265x393 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S7 Double Vizor [8414]
    FERMAX® CITY™ S7 Double Vizor
    Ref.: 8414
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 265x345 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S6 Double Vizor [8413]
    FERMAX® CITY™ S6 Double Vizor
    Ref.: 8413
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 265x300 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S5 Double Vizor [8412]
    FERMAX® CITY™ S5 Double Vizor
    Ref.: 8412
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 265x250 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S4 Double Vizor [8411]
    FERMAX® CITY™ S4 Double Vizor
    Ref.: 8411
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 265x203 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S9 Single Vizor [8480]
    FERMAX® CITY™ S9 Single Vizor
    Ref.: 8480
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x440,5 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S8 Single Vizor [8407]
    FERMAX® CITY™ S8 Single Vizor
    Ref.: 8407
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x393 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S7 Single Vizor [8406]
    FERMAX® CITY™ S7 Single Vizor
    Ref.: 8406
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x345 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S6 Single Vizor [8405]
    FERMAX® CITY™ S6 Single Vizor
    Ref.: 8405
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x300 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S5 Single Vizor [8404]
    FERMAX® CITY™ S5 Single Vizor
    Ref.: 8404
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x250 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S4 Single Vizor [8403]
    FERMAX® CITY™ S4 Single Vizor
    Ref.: 8403
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x203 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S3 Single Vizor [8402]
    FERMAX® CITY™ S3 Single Vizor
    Ref.: 8402
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x180 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S2 Single Vizor [8401]
    FERMAX® CITY™ S2 Single Vizor
    Ref.: 8401
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x155 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S1 Single Vizor [8400]
    FERMAX® CITY™ S1 Single Vizor
    Ref.: 8400
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x130 mm (width-heigth).
    V.A.T. included
    Consult
    FERMAX® CITY™ S9 Simple Frame [8259]
    FERMAX® CITY™ S9 Simple Frame
    Ref.: 8259
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 495(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S8 Simple Frame [8258]
    FERMAX® CITY™ S8 Simple Frame
    Ref.: 8258
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S7 Simple Frame [8257]
    FERMAX® CITY™ S7 Simple Frame
    Ref.: 8257
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S6 Simple Frame [8256]
    FERMAX® CITY™ S6 Simple Frame
    Ref.: 8256
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S5 Simple Frame [8255]
    FERMAX® CITY™ S5 Simple Frame
    Ref.: 8255
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S4 Simple Frame [8254]
    FERMAX® CITY™ S4 Simple Frame
    Ref.: 8254
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S3 Simple Frame [8253]
    FERMAX® CITY™ S3 Simple Frame
    Ref.: 8253
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved