English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 1444
    KILSEN® SW for Sensor Cable Configuration [AACU-PCC]
    KILSEN® SW for Sensor Cable Configuration
    Ref.: AACU-PCC
    Configuration software with USB cable, to configure AACULP (Cable sensor units of UTC™ KILSEN® analogue).
    V.A.T. included
    164.38 €
    KILSEN® Thermovelocimetric Detector [KL710]
    KILSEN® Thermovelocimetric Detector
    Ref.: KL710
    Conventional thermovelocimetric detector, double LED indicator with total vision and a output for remote controller, anti-theft head system and stainless steel contacts. Requires KZ700 base, not included. Certified: CE and CPR (EN54 part 5).
    V.A.T. included
    19.88 €
    KILSEN® White Multi-Tone Fire Alarm for ceiling [ASC366W]
    KILSEN® White Multi-Tone Fire Alarm for ceiling
    Ref.: ASC366W
    Polycarbonate alarm sounder at 24Vcc/5,1-41mA for indoor with ceilingmounting, white color, with red flashlight lamp. 32 Tones. Sound power: 85 to 97dB. IP21. Dimensions: Ø100 x 94 mm. Operating temperature:-25ºC a 70ºC. Certificates: CE and CPR (EN54 Part 3 and 23).
    V.A.T. included
    160.16 €
    KILSEN® White Multi-Tone Fire Sounder for Wall [ASW366W]
    KILSEN® White Multi-Tone Fire Sounder for Wall
    Ref.: ASW366W
    Polycarbonate alarm sounder at 24Vcc/5,1-41mA for indoor with wall mounting, white color, with red flashlight lamp. 32 Tones. Sound power: 85 to 97dB. IP21. Dimensions: Ø100 x 100 mm. Operating temperature: -25ºC to 70ºC. Certificates: CE and CPR (EN54 part 3 and 23).
    V.A.T. included
    160.16 €
    KILSEN® White Push Button [DMN700W09-KITR]
    KILSEN® White Push Button
    Ref.: DMN700W09-KITR
    White resetable alarm push button for surface mounting with test key. Includes DMN800 resetable plastic, DM788W surface mounting base and DMN782 tiling lid. Requires serie resistor of 100 ohm- 2W. Dimensions: 92 x 115 x 59 mm.
    V.A.T. included
    37.74 €
    KILSEN® Yellow Push Button for Gas Activation [DM861-4]
    KILSEN® Yellow Push Button for Gas Activation
    Ref.: DM861-4
    Yellow extinguishing push button, for surface mounting with test key. Aluminium casing. Includes serie resistor of 100 ohm-2W. IP43. Dimensions: 125 x 125 x 34 mm. Certified: CPR (EN12094). Spanish, Portugese and Italian.
    V.A.T. included
    88.69 €
    KILSEN® Yellow Push Button [DMN700Y09-KITR]
    KILSEN® Yellow Push Button
    Ref.: DMN700Y09-KITR
    Yellow resetable alarm push button for surface mounting with test key. Includes DMN800 resetable plastic, DM788W surface mounting base and DMN782 tiling lid. Requires serie resistor of 100 ohm- 2W. Dimensions: 92 x 115 x 59 mm.
    V.A.T. included
    37.74 €
    L Bracket for UTC™ Interlogix® Maglocks (Series 130) [FE130L]
    L Bracket for UTC™ Interlogix® Maglocks (Series 130)
    Ref.: FE130L
    L-mount bracket for Series 130.
    V.A.T. included
    Consult
    L Bracket for UTC™ Interlogix® Maglocks (Series 160) [FE160L]
    L Bracket for UTC™ Interlogix® Maglocks (Series 160)
    Ref.: FE160L
    L-mount bracket for Series 160.
    V.A.T. included
    Consult
    L Bracket for UTC™ Interlogix® Maglocks [FE323N-LB]
    L Bracket for UTC™ Interlogix® Maglocks
    Ref.: FE323N-LB
    Soporte de montaje en L para electroimanes de 3000N.
    V.A.T. included
    Consult
    L Bracket for UTC™ Interlogix® Maglocks [FE37L]
    L Bracket for UTC™ Interlogix® Maglocks
    Ref.: FE37L
    L-mount bracket for 6000N electromagnets.
    V.A.T. included
    Consult
    L Support for UTC™ Interlogix® Maglocks [FE32L]
    L Support for UTC™ Interlogix® Maglocks
    Ref.: FE32L
    L-mount bracket for 3000N electromagnets.
    V.A.T. included
    Consult
    Large Cover for UTC™ Aritech™ Panels [2010-2T-FM]
    Large Cover for UTC™ Aritech™ Panels
    Ref.: 2010-2T-FM
    Cover for semi-recessed analogical 2X panels, large box. Dimensions: 595 x 488 x 62 mm.
    V.A.T. included
    250.07 €
    LASER pointer for UTC™ sensors [VE710]
    LASER pointer for UTC™ sensors
    Ref.: VE710
    Laser pointer, Recommended accessory to adjust VE700 long-Range detectors. Laser focus system. Power supply from the detector. Quick anchoring system.
    V.A.T. included
    74.78 €
    LED Strobe Light, Intrinsically Safe with Red Lens [FA370]
    LED Strobe Light, Intrinsically Safe with Red Lens
    Ref.: FA370
    Pilot intrinsically safe at 24Vcc/48mA. Red glass and base. IP65. Dimensions: 89x85mm. Certificates: CE and CPR (EN54 part 3).
    V.A.T. included
    1,012.31 €
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (St Steel) w/ Sleeve - Qty 100 [ACA-B706SS-100]
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-B706SS-100
    The ACA-B706 series 7-bracket (pipe clip) is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    864.51 €
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (St Steel) w/ Sleeve - Qty 25 [ACA-B706SS-025]
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-B706SS-025
    The ACA-B706 series 7-bracket (pipe clip) is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    270.18 €
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (Zintec) w/ Sleeve - Qty 100 [ACA-B706-100]
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (Zintec) w/ Sleeve - Qty 100
    Ref.: ACA-B706-100
    The ACA-B706 series 7-bracket (pipe clip) is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    621.38 €
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (Zintec) w/ Sleeve - Qty 25 [ACA-B706-025]
    LHD Cable Accessory - Bracket "7", 60 mm (2.4") (Zintec) w/ Sleeve - Qty 25
    Ref.: ACA-B706-025
    The ACA-B706 series 7-bracket (pipe clip) is designed to utilise existing pipework running through the protected area as a fixture for the liner heat detection cable. The ACA-B706 is designed to fit any pipe diameter. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    194.18 €
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (St Steel) w/ Sleeve - Qty 100 [ACA-BI20SS-100]
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-BI20SS-100
    The ACA-BI series I-brackets (extension pieces) is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    1,118.38 €
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (St Steel) w/ Sleeve - Qty 25 [ACA-BI20SS-025]
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-BI20SS-025
    The ACA-BI series I-brackets (extension pieces) is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    Consult
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (Zintec) w/ Sleeve - Qty 100 [ACA-BI20-100]
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (Zintec) w/ Sleeve - Qty 100
    Ref.: ACA-BI20-100
    The ACA-BI series I-brackets (extension pieces) is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    621.38 €
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (Zintec) w/ Sleeve - Qty 25 [ACA-BI20-025]
    LHD Cable Accessory - Bracket "I", 200mm (7.9") (Zintec) w/ Sleeve - Qty 25
    Ref.: ACA-BI20-025
    The ACA-BI series I-brackets (extension pieces) is designed to extend the positioning of linear heat cable installed on 7-brackets and edge clips. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    194.13 €
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 100 [ACA-BL10SS-100]
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-BL10SS-100
    The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    519.96 €
    SYSAWAY© 2024 All rights reserved