The SF116 is a 16-port PoE designed to supply IP cameras operating in the IEEE 802.3af/at standard. Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 16 ports of the switch. Power supply: 90÷264VAC. PoE supply: 16 ports 10/100 Mb/s - IEEE 802.3af/at, 52VDC for up to 30W/port (PoE+). UPLINK port: 2 ports 10/100/1000 Mb/s – G1/TP, G2/TP – for recorder / switch / computer installation. Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – G1/SFP, G2/SFP - for recorder / switch / computer installation. Dimensions: 442 x 44 x 292 mm.

Designed to supply IP cameras operating in the IEEE 802.3af standard. Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 16 ports of the switch. Power supply: 176÷264VAC. PoE supply: 16 ports 10/100 Mb/s - IEEE 802.3af, 54VDC for up to 15.4W/port. UPLINK port: 2 ports 10/100/1000 Mb/s – G1/TP, G2/TP – for recorder / switch / computer installation. Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – G1/SFP, G2/SFP - for recorder / switch / computer installation. Battery charging current: 0.5Amp (4x batteries 12VDC). Battery: 4x7Ah / 4x17Ah. Approximate backup time: 5h 15min. Mounting dimensions: W=19", H=2U, D=348. The output supplying the recorder: 5A/12VDC.

Designed to supply IP cameras operating in the IEEE 802.3af standard. Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 16 ports of the switch. Power supply: 176÷264VAC. PoE supply: 16 ports 10/100 Mb/s - IEEE 802.3af, 54VDC for up to 15.4W/port. UPLINK port: 2 ports 10/100/1000 Mb/s – G1/TP, G2/TP – for recorder / switch / computer installation. Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – G1/SFP, G2/SFP - for recorder / switch / computer installation. Battery charging current: 0.5Amp (4x batteries 12VDC). Battery: 4x7Ah / 4x17Ah. Approximate backup time: 5h 15min. Mounting dimensions: W=19", H=2U, D=348.

ISFG42 is 4 ports PoE switch for DIN rail, without power supply unit, dedicated to supply IP cameras in IEEE 802.3af/at. standard. Automatic detection of any devices powered in PoE/PoE+ standard is enabled at 1 – 2 ports of switch. Power supply: 12÷57VDC (possibility of redundant supplying). Number of ports: 4 ports (2xPoE + 2xSFP). PoE supply: 2 ports 10/100/1000 Mb/s – IEEE 802.3af/at, 48÷57VDC / 30W/port (PoE+). Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – for recorder / switch / computer installation. Dimensions: W=30, H=128, D=112 [+/-2mm]. 30W/port – maximum power of a single PoE port. 50W – maximum total power for all PoE ports. supported protocols and standards: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP. Port sockets: RJ45, SFP. Surface mounted DIN – color black RAL 9005. Possibility of redundant power supply. Power supply unit is not included. Recommended: NDR-75-48.

Increases Ethernet and PoE power range by 100 meters. Power input: 44÷57VDC. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - not compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Operating temperature: -25°C÷50°C. Dimensions: W=158 H=118 D=77 [+/- 2mm]. The number of cable glands/cable diameter: 4pcs. / 4÷8mm. Hermetic enclosure IP56, surface mounted enclosure, locking – bolted. Pole mounting option (requires the OZB1 adapter - optional accessory). Designed for 10Mbit/s and 100Mbit/s network.

Increases Ethernet and PoE power range by 100 meters. Power input: 44÷57VDC. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - not compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.

Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Operating temperature: -25°C÷50°C. Dimensions: W=158 H=118 D=77 [+/- 2mm]. The number of cable glands/cable diameter: 4pcs. / 4÷8mm. Hermetic enclosure IP56, surface mounted enclosure, locking – bolted. Pole mounting option (requires the OZB1 adapter - optional accessory). Designed for 10Mbit/s and 100Mbit/s network.

Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port (?0.4Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.

Additional power cord 230VAC 2x0.5mm2, 1.2m, CEE 7/16, IEC C7.

The SF124 is a 24-port PoE designed to supply IP cameras operating in the IEEE 802.3af/at standard. Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 24 ports of the switch. Power supply: 90÷264VAC. PoE supply: 24 ports 10/100 Mb/s - IEEE 802.3af/at, 52VDC for up to 30W/port (PoE+). UPLINK port: 2 ports 10/100/1000 Mb/s – G1/TP, G2/TP – for recorder / switch / computer installation. Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – G1/SFP, G2/SFP - for recorder / switch / computer installation. Dimensions: 442 x 44 x 224 mm.

The S124 is a 24-port PoE designed to supply IP cameras operating in the IEEE 802.3af/at standard. Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 24 ports of the switch. Power supply: 90÷264VAC. PoE supply: 24 ports 10/100 Mb/s – IEEE 802.3af/at, 52VDC for up to 30W/port (PoE+). UPLINK ports: 2 port 10/100/1000 Mb/s – for recorder / switch / computer installation. Dimensions: 330 x 44 x 204 mm.

Power supply for 24VAC cameras with metal enclosure. Size: 215 x 246 x 64 mm, 8 x adjustment, 8x0.75A, (? 6A max. for 24VAC, ? 5.5A max. for 27VAC), SCP (short circuit protection): standard fuses or PTC fuses. LED x 8: AC Failure. LED x 1: AW (Output Failure).

The RC24V battery controller is designed for monitoring the status of the 2÷4 battery pack based (the total capacity of 80Ah/12V (SLA) max. batteries), on the measurements of resistance, continuity of the battery circuit, voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging circuit. In the case of failure, a LED light is activated, which is accompanied by switching of relay contacts and acoustic indication.

The AWZ633 battery controller is designed for monitoring the status of the (Capacity: 7÷40Ah/12V (SLA)) 2 batteries pack based on the measurements of resistance, continuity of the batteries circuit, voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging circuit. In the case of failure, a LED light is activated, which is accompanied by switching of relay contacts and acoustic indication. Destination: To monitor condition of battery/batteries by measuring resistance, continuity of the battery/batteries circuit, voltage and charge level. Short circuit protection and reverse battery connection. Acoustic indication of failure, LED diode and switching relay on. Input: BAT – terminals for connecting external batteries. Output: PSU – terminals for connecting uninterruptible power supply unit (BAT output of power supply). Maximum current: 10Amp. Fuse type: glass fuse – 1x15Amp. Battery: 2x7÷40Ah. Technical outputs relay type: ALARM – collective failure. Acoustic indication of failure – BUZZER – possibility of switching on / off. Mounting dimensions: W=108, H=38, L=80 [+/- 2mm].

The RCB V battery controller is designed for monitoring the status of the 4x17Ah/12V (SLA) battery pack based on the measurements of resistance, continuity of the battery circuit, voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging circuit. In the case of failure, a LED light is activated, which is accompanied by switching of relay contacts and acoustic indication.

Operating automation module. Size: 127 x 56 x 58 mm, Uin=27.6VDC, technical outputs: (relay type and transistor type), FAC - AC failure, FPS - PSU failure, FLB - low battery voltage).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 27.6 VDC with an output current of I = 2.2 Amp + 0.2/0.5 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 7Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 2.2A / 27.6VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V. Efficiency: 90%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 230 x 300 x 82 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 27.6 VDC with an output current of I = 3 Amp + 0.5/1 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 17Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 3A / 27.6VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V and 17Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 300 x 300 x 105 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 27.6 VDC with an output current of I = 3 Amp + 0.5/1 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate 2 x 17Ah / 12V batteries. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 3A / 27.6VDC. Battery charging current: 0.5Amp. Mounting battery: Supports (x2) 7Ah / 12V and 17Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 330 x 380 x 173 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 27.6 VDC with an output current of I = 4.5 Amp + 0.5/2 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate 2 x 7Ah / 2 x 17Ah / 2 x 28Ah / 2 x 40Ah batteries. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 4.5A / 27.6VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 2 x 7Ah / 2 x 17Ah / 2 x 28Ah / 2 x 40Ah. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 460 x 390 x 173 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

Increases Ethernet and PoE power range by 100 meters. Allows connecting three IP-PoE cameras using a single cable. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af/at. PoE OUT3 – not compliant with IEEE802.3af. Output current PoE OUT: 0.6Amp/port – OUT1/2; 0.3Amp/port – OUT3 (?0.6Amp max.). Protections: OLP, SCP. Operating temperature: -25°C÷50°C. Dimensions: W=158 H=118 D=77 [+/- 2mm]. The number of cable glands/cable diameter: 4pcs. / 4÷8mm. Hermetic enclosure IP56, surface mounted enclosure, locking – bolted. Pole mounting option (requires the OZB1 adapter - optional accessory). Designed for 10Mbit/s and 100Mbit/s network.

Increases Ethernet and PoE power range by 100 meters. Allows connecting three IP-PoE cameras using a single cable. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT1 / PoE OUT2 - compliant with IEEE802.3af/at. PoE OUT3 – not compliant with IEEE802.3af. Output current PoE OUT: 0.6Amp/port – OUT1/2; 0.3Amp/port – OUT3 (?0.6Amp max.). Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.

Power: 230VA. Power supply: 230V/50Hz/0.04Amp. Power supply output: 16.5V/1.8Amp. Enclosure: ABS, epoxy encapsulated. To be mounted on a flat surface. Supply voltage: V DC230V AC. Current consumption: 1.80Amp. Output voltage: 16.50V. Power: 30VA. Dimensions: 88 x 54 x 60 mm. Operating temperature: -10 ... +40° C.

ISFG64 is 6 ports PoE switch for DIN rail, without power supply unit, dedicated to supply IP cameras in IEEE 802.3af/at. standard. Automatic detection of any devices powered in PoE/PoE+ standard is enabled at 1 – 4 ports of switch. Power supply: 12÷57VDC (possibility of redundant supplying). Number of ports: 6 ports (4xPoE + 2xSFP). PoE supply: 4 ports 10/100/1000 Mb/s – IEEE 802.3af/at, 48÷57VDC / 30W/port (PoE+). Outlets: SFP UPLINK: 2 ports 10/100/1000 Mb/s – for recorder / switch / computer installation. Dimensions: W=30, H=128, D=112 [+/-2mm]. 30W/port – maximum power of a single PoE port. 75W – maximum total power for all PoE ports. Supported protocols and standards: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP. Port sockets: RJ45, SFP. Surface mounted DIN – color black RAL 9005. Possibility of redundant power supply. Power supply unit is not included. Recommended: NDR-75-48.