Two-way line array speaker ideal for long distance sound transmission andconfigures a line array by arranging speaker elements vertically close to each other.It satisfies the water protection requirements set down in the IPX4 Standard.It can be converted into the bi-amplifier drive system by changing the internal connection.It can be used for high-impedance applications with the installation of the optional MT-S0601Matching transformer. Continuous program: 600 W (single-amp mode). Sensitivity: 94 dB (1 W, 1 m). Frequency Response: 70 Hz - 20 kHz. Crossover Frequency: 3.5 kHz. Directivity Angle Horizontal: 90º, Vertical: 0. IPX4 Water Protection. Dimensions 160 (W) x 895 (H) x 255 (D) mm (excluding connected cable). White color.

Two-way line array speaker ideal for short distance sound transmission andconfigures a line array by arranging speaker elements vertically close to each other.It can be converted into the bi-amplifier drive system by changing the internal connection.It can be used for high-impedance applications with the installation of the optional MT-S0601Matching transformer. Continuous program power: 600 W (single-amp mode). Sensitivity: 93 dB (1 W, 1 m). Frequency Response: 70 Hz - 20 kHz. Crossover Frequency: 3.5 kHz. Directivity Angle Horizontal: 90º, Vertical: 10. Dimensions: 160 (W) x 892 (H) x 303 (D) mm. White color.

Two-way line array speaker ideal for short distance sound transmission andconfigures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection.It can be used for high-impedance applications with the installation of the optional MT-S0601Matching transformer. Continuous program power: 600 W (single-amp mode). Sensitivity: 93 dB (1 W, 1 m). Frequency Response: 70 Hz - 20 kHz. Crossover Frequency: 3.5 kHz. Directivity Angle: Horizontal: 90º, Vertical: 10. EN-54 certified. White color.

Two-way line array speaker ideal for short distance sound transmission andconfigures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601Matching transformer. Continuous program power: 600 W (single-amp mode). Sensitivity: 93 dB (1 W, 1 m). Frequency Response: 70 Hz - 20 kHz. Crossover Frequency: 3.5 kHz. Directivity Angle: Horizontal: 90º, Vertical: 10. IPX4 Water Protection. White color.

Power unit with 1000 W RMS power rating, for 100 and 70 V line as well as for direct 4 to 16 ohms line. It includes front indicators of temperature, protection, power supply, clip and signal. Input and output by means of XLR and JACK connectors.

Power amplifier with power rating of 120 W RMS, with speakers output of 100 V, 70 V or 50 V, or low impedance (4, 8 or 16 ohm). It has audio inputs/outputs of program and priority (0 dBu and 600 ohm) with independent volume control. Incorporates the security paging function and protection circuit against overload, overheat and short circuit in the line of speakers. Compatible with the surveillance unit SU-114N. Two rack units.

4-channel power amplifier for 100 V line with 4 x 120 W output power. Double program/priority volume controls, security paging relay and thermal and short-circuit/overload protections. Direct connection to SU-114N surveillance unit.

Power amplifier with power rating of 240 W RMS, with speakers output of 100 V, 70 V or 50 V, or low impedance (4, 8 or 16 ohm). It has audio inputs/outputs of program and priority (0 dBu and 600 ohm) with independent volume control. Incorporates the security paging function and protection circuit against overload, overheat and short circuit in the line of speakers. Compatible with the surveillance unit SU-114N. Two rack units.

2-channel power amplifier for 100 V line with 2 x 240 W output power. Double program/priority volume controls, security paging relay and thermal and short-circuit/overload protections. Direct connection to SU-114N surveillance unit.

Power amplifier with power rating of 360 W RMS, with speakers output of 100 V, 70 V or 50 V, or low impedance (4, 8 or 16 ohm). It has audio inputs/outputs of program and priority (0 dBu and 600 ohm) with independent volume control. Incorporates the security paging function and protection circuit against overload, overheat and short circuit in the line of speakers. Compatible with the surveillance unit SU-114N. Two rack units.

Power amplifier with power rating of 480 W RMS, with speakers output of 100 V or 70 V, or low impedance (8 ohm). It has audio inputs/outputs of program and priority (0 dBu and 600 ohm) with independent volume control. Incorporates the security paging function and protection circuit against overload, overheat and short circuit in the line of speakers. Compatible with the surveillance unit SU-114N. Three rack units.

Power amplifier with power rating of 60 W RMS, with speakers output of 100 V, 70 V or 50 V, or low impedance (4, 8 or 16 ohm). It has audio inputs/outputs of program and priority (0 dBu and 600 ohm) with independent volume control. Incorporates the security paging function and protection circuit against overload, overheat and short circuit in the line of speakers. Compatible with the surveillance unit SU-114N. Two rack units.

4-channel power amplifier for 100 V line with 4 x 60 W output power. Double program/priority volume controls, security paging relay and thermal and short-circuit/overload protections. Direct connection to SU-114N surveillance unit.

Acoustic box for outdoor (IP55) 2-way. RMS power of 20 W selectable by means of a switch (20, 10, 5 and 2.5 W), 100 V / 8 ohm. With 4" woofer and 1" tweeter. Sensitivity of 88 dB SPL (1 W, 1 m, 1 kHz) and maximum acoustic pressure of 101 dB SPL (20 W, 1 m, 1 kHz). Frequency response from 90 Hz to 20 kHz. Includes adjustable U-bracket for wall mounting. Dimensions 158 x 238 x 129 mm. Finished in black HIPS, with grid and aluminum support.

Two-way speaker for outdoors with power rating of 60 W @ 8 ohm or 32 W @ 100 V line (selectable by switch to 32, 16, 8, 4 and 2 W). 5.25" woofer for low and medium frequencies and 1.42" tweeter for high frequencies. Frequency response of 60-20.000 Hz. Sensitivity 90 dB (1 W, 1 m and 1 kHz). Maximum sound pressure level 105 dB (32 W, 1 m and 1 kHz). Dimensions 190 x 256 x 255 mm. Weight 2.6 kg. ABS black enclosure, metallic grille and adjustable bracket. Weatherproof with IP56 rating.

Two-way speaker for outdoors with power rating of 60 W (8 ohm) or 32 W (selectable by switch to 32, 16, 8, 4 and 2 W). 5.25" woofer for low and medium frequencies and 1.42" tweeter for high frequencies. Frequency response of 60-20.000 Hz. Sensitivity 90 dB (1 W, 1 m and 1 kHz). Maximum sound pressure level 105 dB (32 W, 1 m and 1 kHz). Dimensions 190 x 256 x 255 mm. Weight 2.6 kg. ABS white enclosure, metallic grille and adjustable bracket. Weatherproof with IP56 rating.

Remote control (1 per output) for MX-88 audio matrix with MIC / LINE inputs, BGM selection and volume adjustment. Distance up to 300m with UTP cat5.

Protection module 100 V line and Ethernet. For EN 54 systems.

230 VAC power filter module. For EN 54 systems.

AC differential switch for MS-150. For EN 54 systems.

Differential current circuit breaker for batteries. For EN 54 systems.

Power socket for MS-150. For EN 54 systems.

OPTIMUS expands the SIP compatibility options of its public address equipment with the IA-10SIP model, a SIP interface to analog audio that allows audio to be transmitted from any SIP device to an analog public address equipment: amplifier, preamplifier, power stage ... The equipment is configured from a web server and is powered by PoE or by a 5 V DC source. It has several audio outputs, one direct to an 8 ohm speaker and 2 W of power, and two to connect the public address equipment, one with AUX level (0 dB) and the other with MIC level (-60 dB). The equipment also provides a signal to activate the priority (open collector activated in connection) and a remote control (relay) activated by DMTF from the SIP equipment. This interface is a family with the IA-20SIP model, which adds to the IA-10SIP features the possibility of connecting a microphone or analog sound source and converting it to SIP. It is a device that allows, therefore, standard intercom or public address functions using the SIP telephony network.

Potentiometer to connect to the 2653-AS amplifier and control the volume. It is embedded in a universal box. Frame not included (M-420 series or compatible electrical series).