Multifunction intercom with the possibility of establishing all types of call and presence with the central, communicating with it and with other intercoms. Suitable for rooms in hospitals, clinics and residences. Both models can establish a connection with the intercom that generated the highest priority call. The TH-03F model incorporates a small screen where you can see the origin and type of this call.

Communication module with speaker and microphone to make an audio connection through the UR control units.

Bed control with call button and additional buttons for light control using remote control switches. It has 1.9 m of cable and USB type B connector. It is used together with the U-PT model room mechanism

Room mechanism for flush mounting. It has a call key, presence key and call in progress and active presence indicator lights. It incorporates a handle to generate an emergency call, being suitable for installation in bathrooms. With USB type B connector for connection of the U-ML model bed control, control disconnection warning and outputs for control of up to 2 contactors. It is installed in a universal box, both standard and for false partitions. Compatible with frames of the M-420 series and with most series of electrical equipment.

Universal box flush mount call mechanism (standard or for false partition). It allows making a bathroom call from the handle and is prepared for installation in humid environments thanks to its IP 65 protection. Frame of the M-420 series or compatible electrical series.

U series, for universal box. Configurable call button (normal or emergency) or presence. LEDs: call in progress and active presence. Fully metallic.

U series, for universal box. Push buttons: presence and normal call. LEDs: call in progress and active presence. USB connector for U-ML remote control. Command disconnected warning.

Remote control unit for 4 zones that establishes data signaling between the elements of up to 4 call points and the control center. Allows connection of call and presence mechanisms and hallway signaling lamps. Surface installation. Black metallic finish. Dimensions 165 x 120 x 23 mm.

Remote control unit for 1 zone that establishes data signaling between the elements of a call point and the control center. Allows connection of call and presence mechanisms and hallway signaling lamps. Surface installation. Black metallic finish. Dimensions 102 x 102 x 23 mm.

Control electronics that establish communication between the elements of a call point and the control center. It allows the connection of the call and presence mechanisms, the intercom and the corridor signaling lamp.

Control electronics that establish communication between the elements of four call points and the control center. It allows the connection of the call and presence mechanisms, the intercom and the corridor signaling lamp.

Audio board electronics for SMC intercom systems. Includes high-sensitivity omni-directional microphone and moisture-resistant 4W power mylar speaker. Supplied with a metal box for the electronics and two cable outlets. 24 V DC power supply. Consumption 25 mA / 230 mA. Dimensions 160 x 110 x 40 mm.

High sensitivity electret microphone mounted on threaded brass cylinder, for flush mounting as an ambient sound pick-up microphone, and preamplifier with selectable sensitivity (0, -30, -60 dB) symmetric signal output in separate metal enclosure. Includes power supply.

High sensitivity electret microphone and preamplifier with selectable sensitivity symmetric signal output (0, -30, -60 dB) in plastic case. Includes power supply.

TB-SEF telephone handset for CC-122F.

Electret lapel microphone (levalier) with built-in clamp and 2 m cable. Omnidirectional. Output impedance 1,000 ohms at 1 kHz. Frequency response 60 ~ 16,000 Hz. Sensitivity -65 dB at 1 kHz. 6.35 mm jack connector to connect to amplifier. Metallic, black color. Gold metallic battery holder.

Equipped with Priority function, Chime function, and 2 Zone selector switches, the A-1812 PA Amplifier of 120 W is designed to suit the following PA system applications: paging announcements, intercommunications, BGM, and broadcasting in schools, offices, and shops. It's power remote control function, provided especially for use in conjunction with the P-1812 (optional), will turn ON or OFF the P-1812's power. Dimensions: 420 x 100 x 364 mm (2 u). Weight: 12,6 kg.

Wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker. 6 W RMS rated input for 100 V line with 6, 3, 1,5 and 0,8 W selectable power. 120 to 15.000 Hz Frequency Response. 91 dB (1 W, 1 m, 1 kHz) sensivity. White ABS case. Dimensions: 173 x 195 x 101 mm. Weight: 0,78 kg.

Wall mount speaker made of ABS resin and can be hooked or mounted directly on the wall. The push-in type input terminal makes cable connections easy and allows bridge wiring. The input impedance can be easily changed by changing the tap position of the transformer from the rear side of the speaker. The BS-633AT has a built-in attenuator and can be connected to a 2-wire and 3-wire systems. 6 W RMS rated input for 100 V line with 6 and 3 W selectable power. 120 to 15.000 Hz Frequency Response. 91 dB (1 W, 1 m, 1 kHz) sensivity. White ABS case. Dimensions: 173 x 195 x 101 mm. Weight: 0,81 kg.

This Wall Mount Speaker can be installed easily on the wall with help of the plug-in speaker receptacle. 6 W RMS rated input for 100 V line with 6 and 3 W selectable power. 120 to 18.000 Hz Frequency Response. 90 dB (1 W, 1 m, 1 kHz) sensivity. White HIP resin enclosure and steel grille. Dimensions: 219 x 330 x 80 mm. Weight: 1,3 kg.

This Wall Mount Speaker can be installed easily on the wall with help of the plug-in speaker receptacle. It incorporates attenuator for volume control, with connection to systems of 2 or 3 threads. 120 to 18.000 Hz Frequency Response. 90 dB (1 W, 1 m, 1 kHz) sensivity. White HIP resin enclosure and steel grille. Dimensions: 219 x 330 x 80 mm. Weight: 1,3 kg.

Wall Mount Speaker, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. 6 W RMS rated input for 100 V line with 6, 3, 1,5 and 0,8 W selectable power. 150 to 20.000 Hz Frequency Response. 94 dB (1 W, 1 m, 1 kHz) sensivity. Cabinet: Particle board with pvc sheet, off-white (RAL 9010). Grille: Surface-treated steel plate net, off-white (RAL 9010). Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.

Wall mount speaker of 6 W RMS of selectable power for 100 V line. Power selection of 6, 3, 1.5 and 0.8 W. Frequency response from 150 to 18,000 Hz. Sensitivity 94 dB (1 W, 1 m, 1 kHz). Maximum sound pressure 102 dB (6 W, 1 m, 1 kHz). Wooden box and metal grille black (RAL 9010). Ceramic connectors and thermal fuse. Certification for voice evacuation and alarm systems EN 54-24. Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.

Wall mount speaker of 6 W RMS of selectable power for 100 V line. Power selection of 6, 3, 1.5 and 0.8 W. Frequency response from 150 to 18,000 Hz. Sensitivity 94 dB (1 W, 1 m, 1 kHz). Maximum sound pressure 102 dB (6 W, 1 m, 1 kHz). Wooden box and metal grille white (RAL 9010). Ceramic connectors and thermal fuse. Certification for voice evacuation and alarm systems EN 54-24. Dimensions: 250 x 190 x 110 mm. Weight: 1,7 kg.