English
Español
  • Search
  • 0.00 €

    Products 1444
    UTC™ 4 Doors Controller for Main Panels [ATS1250]
    UTC™ 4 Doors Controller for Main Panels
    Ref.: ATS1250
    Smart controller module for 4 doors and 12 pre-programmed inputs and 4 programmable on motherboard, in BUS for ATS centrals. Allows 16 readers or ATS keyboards and 4 Wiegand. Power source: 230Vca. Maximum distance from the panel: 1,5 Km. 1Mb memory, expandable up to 4 Mb. Dimensions: 480 x 464 x 160 mm. Auxiliary output: 13,8VDC/3A. Maximum 12 modules for each central: 12x4 = 48+16 = 64 doors.
    V.A.T. included
    Consult
    UTC™ AA 6VDC Battery Pack (25 Units) [BS36V]
    UTC™ AA 6VDC Battery Pack (25 Units)
    Ref.: BS36V
    SAFT ,6 Volt, 1/2 AA lithium Battery (box of 25).
    V.A.T. included
    6.68 €
    UTC™ ACA001 Surface Push Button [ACA001]
    UTC™ ACA001 Surface Push Button
    Ref.: ACA001
    Exit request pushbutton, surface mounting. Dimensions: 76 x 72 x 32 mm. Weight: 25gr.
    V.A.T. included
    Consult
    UTC™ ACL570FI Standalone Keypad (Flush) [ACL570FI]
    UTC™ ACL570FI Standalone Keypad (Flush)
    Ref.: ACL570FI
    Autonomous built-in keypad for control of a door and security system. Interior / exterior mounting. 99 codes. 2 relay outputs. Up to 2 slave keypads ACL701 or ACL771. IP65. Working temperature from -25ºC to 60ºC.
    V.A.T. included
    Consult
    UTC™ ACL580 Standalone Keypad [ACL580]
    UTC™ ACL580 Standalone Keypad
    Ref.: ACL580
    Autonomous keypad for control of a door and security system. Interior / exterior mounting. 1,000 codes. 2 relay outputs. Up to 2 slave keypads ACL701 or ACL771. IP65. Working temperature from -20ºC to 50ºC. Dimensions: 84 x 108 x 40 mm. Voltage: 12 / 24 VAC/VDC.
    V.A.T. included
    Consult
    UTC™ ACL760 Standalone Keypad [ACL760]
    UTC™ ACL760 Standalone Keypad
    Ref.: ACL760
    Standalone anti-vandal keypad. 99 codes. 2 relay outputs and 1 output request input. 3 meters cable Up to 3 slave keypads.
    V.A.T. included
    Consult
    UTC™ ACL875SU-S Standalone Keypad (Surface) [ACL875SU-S]
    UTC™ ACL875SU-S Standalone Keypad (Surface)
    Ref.: ACL875SU-S
    Aluminum keypad for autonomous surface mounting, for 99 users, with backlit metal keypad, status leds, buzzer, tamper protection, 30mA standby and 100mA consumption, relay output 2A and 1 250mA transistor, includes wiring 1 meter in length , installation for outdoor IP65, power supply 9-14V DC, temperature range -20ºC to + 50ºC. Dimensions 92 x 51 x 25 mm. Silver color.
    V.A.T. included
    Consult
    UTC™ Active IR Outdoor Barrier (100 m) - 2 Beams [SB2100-N]
    UTC™ Active IR Outdoor Barrier (100 m) - 2 Beams
    Ref.: SB2100-N
    AIR two-beam detector 100 m with integrated Heater and Alignment tool. The new SB active infrared beams series includes two-beam and four-beam detectors, which generate an alarm when 1 or 2 beams are interrupted, ignoring birds, small animals, dead leaves, etc. They consist of two identical detector modules equipped with detector cells integrating both transmission and reception functions. These modules are installed facing each other over the distance to be protected providing a non-physical invisible detection zone.
    V.A.T. included
    671.21 €
    UTC™ Active IR Outdoor Barrier (100 m) - 4 Beams [PB611]
    UTC™ Active IR Outdoor Barrier (100 m) - 4 Beams
    Ref.: PB611
    Infrared barrier with 4 beams. Indoor range: 100 meters, and outdoors: 100 meters. To be installed in PB108 or PB109. Visibility control outputs: tamper (NC), alarm (NC / NO) and reduced visibility (NC / NO). Indoor / outdoor mounting. Power supply to 12VDC. Working temperature from -35ºC to 66ºC. Dimensions: 104 x 390 x 98 mm.
    V.A.T. included
    754.13 €
    UTC™ Active IR Outdoor Barrier (100 m) - 4 Beams [SB4100-N]
    UTC™ Active IR Outdoor Barrier (100 m) - 4 Beams
    Ref.: SB4100-N
    AIR four-beam detector 100 m with integrated Heater and Alignment tool. The new SB active infrared beams series includes two-beam and four-beam detectors, which generate an alarm when 1 or 2 beams are interrupted, ignoring birds, small animals, dead leaves, etc. They consist of two identical detector modules equipped with detector cells integrating both transmission and reception functions. These modules are installed facing each other over the distance to be protected providing a non-physical invisible detection zone.
    V.A.T. included
    1,084.55 €
    UTC™ Active IR Outdoor Barrier (120 m) - 4 Beams [SB4200-N]
    UTC™ Active IR Outdoor Barrier (120 m) - 4 Beams
    Ref.: SB4200-N
    AIR four-beam detector 120 m with integrated Heater and Alignment tool. The new SB active infrared beams series includes two-beam and four-beam detectors, which generate an alarm when 1 or 2 beams are interrupted, ignoring birds, small animals, dead leaves, etc. They consist of two identical detector modules equipped with detector cells integrating both transmission and reception functions. These modules are installed facing each other over the distance to be protected providing a non-physical invisible detection zone.
    V.A.T. included
    1,268.25 €
    UTC™ Active IR Outdoor Barrier (20 m) - 2 Beams [PB501]
    UTC™ Active IR Outdoor Barrier (20 m) - 2 Beams
    Ref.: PB501
    Infrared barrier of 2 beams. Indoor range: 40 meters. Outdoor range: 20 meters. Outputs: tamper (NC) and alarm (NC / NO). Power supply: 12VDC. Working temperature from -25ºC to 60ºC. Dimensions: 72 x 170 x 70 mm.
    V.A.T. included
    390.14 €
    UTC™ Active IR Outdoor Barrier (200 m) - 4 Beams [PB621]
    UTC™ Active IR Outdoor Barrier (200 m) - 4 Beams
    Ref.: PB621
    Infrared barrier with 4 beams. Indoor range: 200 meters, and outdoors: 200 meters. To be installed in PB108 or PB109. Visibility control outputs: tamper (NC), alarm (NC / NO) and reduced visibility (NC / NO). Indoor / outdoor mounting. Power supply to 12VDC. Working temperature from -35ºC to 66ºC. Dimensions: 104 x 390 x 98 mm.
    V.A.T. included
    858.27 €
    UTC™ Active IR Outdoor Barrier (40 m) - 2 Beams [PB511]
    UTC™ Active IR Outdoor Barrier (40 m) - 2 Beams
    Ref.: PB511
    Infrared barrier of 2 beams. Indoor range: 80 meters. Outdoor range: 40 meters. Outputs: tamper (NC) and alarm (NC / NO). Power supply: 12VDC. Working temperature from -25ºC to 60ºC. Dimensions: 72 x 170 x 70 mm.
    V.A.T. included
    414.57 €
    UTC™ Active IR Outdoor Barrier (50 m) - 2 Beams [SB250-N]
    UTC™ Active IR Outdoor Barrier (50 m) - 2 Beams
    Ref.: SB250-N
    AIR two-beam detector 50 m with integrated Heater and Alignment tool. The new SB active infrared beams series includes two-beam and four-beam detectors, which generate an alarm when 1 or 2 beams are interrupted, ignoring birds, small animals, dead leaves, etc. They consist of two identical detector modules equipped with detector cells integrating both transmission and reception functions. These modules are installed facing each other over the distance to be protected providing a non-physical invisible detection zone.
    V.A.T. included
    597.01 €
    UTC™ Active IR Outdoor Barrier (50 m) - 4 Beams [PB601]
    UTC™ Active IR Outdoor Barrier (50 m) - 4 Beams
    Ref.: PB601
    Infrared barrier with 4 beams. Indoor range: 50 meters, and outdoors: 50 meters. To be installed in PB108 or PB109. Visibility control outputs: tamper (NC), alarm (NC / NO) and reduced visibility (NC / NO). Indoor / outdoor mounting. Power supply to 12VDC. Working temperature from -35ºC to 66ºC. Dimensions: 104 x 390 x 98 mm.
    V.A.T. included
    672.58 €
    SYSAWAY© 2024 All rights reserved