Internal RFID card reader for installation in the 2N® IP Force™ intercom. Allows the use of EM4100, EM4102 and HID® Prox™ cards. Two more switches, two logic inputs, and Wiegand interface are available. It is compatible with 2N® IP Force models with two keys and with models with pictograms. It also contains a safety switch for the opening signaling of the front panel.

12VDC / 2Amp stabilized source designed for installation in the recessed box under the plaster. Ideal for use in those cases where PoE power is not available. Suitable for Indoor Touch models.

Secondary unit for connection to the internal unit. Card entry control on both sides of the door. IP68 cover, also suitable for outdoor use. Reads the MIFARE cards. Wiegand connection.

An internal RFID card reader to be installed in 2N® IP Force. Allows the use of Mifare®, HID® iClass™, DESFire® and other standards, including NFC support - application for Android 2N® Mobile Key. The reader reads the PACS secure identification number from HID® iClass™ cards or the uID serial number of other cards. It includes two switches, two logic inputs and the Wiegand interface. The reader is compatible with 2N® IP Force™ models with two buttons and with models with pictograms. It also comes with a safety switch to indicate that the front panel is open.

An internal RFID card reader to be installed in 2N® IP Force™. Allows the use of Mifare®, HID® iClass, DESFire® and other standards, including NFC support - application for Android 2N® Mobile Key. The reader reads the serial number of the uID card. It includes two switches, two logic inputs and the Wiegand interface. The reader is compatible with 2N® IP Force™ models with two buttons and with models with pictograms. It also comes with a safety switch to indicate that the front panel is open.

Frame for 2-module recessed installation (must be installed compulsorily with box 9155015). Wall or plasterboard for 2 modules. Hole in the wall: 238 x 108 x 45 mm. For Helios IP Verso™. Finished in Black.

2N® IP access system. The brain of the whole system is the 2N® Access Commander software with a simple and intuitive control. Useful not only to manage access to the building, but also to monitor the status of access units in real time. Being a native part of the 2N® Access Commander software. Registers the assistance of an employee, which can be viewed through the web interface or exported to an XLS or CSV file. Connecting to Microsoft Active Directory using an LDAP protocol or regular synchronization with other systems through CSV ensures that users are automatically created in 2N® Access Commander and synchronized regularly. Supports up to 25 users, only for the use of presence control and tracking.

2N® IP access system. The brain of the whole system is the 2N® Access Commander software with a simple and intuitive control. Useful not only to manage access to the building, but also to monitor the status of access units in real time. Being a native part of the 2N® Access Commander software. Registers the assistance of an employee, which can be viewed through the web interface or exported to an XLS or CSV file. Connecting to Microsoft Active Directory using an LDAP protocol or regular synchronization with other systems through CSV ensures that users are automatically created in 2N® Access Commander and synchronized regularly. Supports up to 5 devices.

The 2N® Access Commander Box is distributed in an integrated and ultra-compact computer. This ready-to-use plug-and-play solution is designed to be installed immediately and by anyone, and is primarily intended for the small and medium-sized business market with up to 50 connected 2N devices. There is no need to have a dedicated server in the company, nor is it necessary to pay additional royalties to the technology team for its initial installation. Simply remove the computer from its packaging, connect it to a power source and an Ethernet cable and start using it! The installation has never been so simple. It is supplied with a license of 5 devices.

2N® IP access system. The brain of the whole system is the 2N® Access Commander software with a simple and intuitive control. Useful not only to manage access to the building, but also to monitor the status of access units in real time. Being a native part of the 2N® Access Commander software. Registers the assistance of an employee, which can be viewed through the web interface or exported to an XLS or CSV file. Connecting to Microsoft Active Directory using an LDAP protocol or regular synchronization with other systems through CSV ensures that users are automatically created in 2N® Access Commander and synchronized regularly. Free license downloadable from the 2N® website.

2N® Access Commander is software ready to easily integrate with third-party systems, such as time and support systems or CRM systems, using the REST API interface.

Use the most popular technology for access control in conjunction with modern, convenient and secure Bluetooth control. All the features are elegantly combined in the same access unit that reads RFID technology and at the same time communicates with your smartphone. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

Use the most popular technology for access control in conjunction with modern, convenient and secure Bluetooth control. All the features are elegantly combined in the same access unit that reads RFID technology and at the same time communicates with your smartphone. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

An IP access control unit that allows users to open a door using Bluetooth (BLE) technology and a smartphone or tablet. All you need is to have the 2N® Mobile Key application installed on your mobile device. The 2N® Access Unit Bluetooth also supports two-factor identification for the user and is designed for locations with high levels of security. It works both indoors and outdoors, under any weather conditions. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

The 2N® Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows simultaneous use of 125 kHz and 13.56 MHz cards. Its greatest advantages are the ease of installation using a single Ethernet cable, the Remote administration and security of hardware and software. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

The 2N® Access Unit 2.0 RFID access control unit has a multi-frequency RFID card reader that allows simultaneous use of 125 kHz and 13.56 MHz cards. Its greatest advantages are the ease of installation using a single Ethernet cable, the Remote administration and security of hardware and software. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

The 2N® Access Unit RFID access control unit is completely based on IP technology. It combines the functions of a traditional door controller and an RFID reader, which significantly reduces installation, wiring and maintenance costs. Accept cards or other media using frequencies of 125 kHz. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

The 2N® Access Unit RFID access control unit is completely based on IP technology. It combines the functions of a traditional door controller and an RFID reader, which significantly reduces installation, wiring and maintenance costs. Accept cards or other media using frequencies of 13.56 MHz. Thanks to NFC wireless technology, you can easily open the door using a smartphone with the 2N® Mobile Key application. It works both indoors and outdoors, under any weather conditions. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

2N® Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and a touch numeric keypad. The unit has a multi-frequency RFID card reader that allows the use of 125 kHz and 13.56 MHz cards, and therefore fulfills the functions of three individual access units. The device is designed for indoor as well as outdoor installations. It works both indoors and outdoors, under any weather conditions. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

2N® Access Unit 2.0 Touch Keypad & RFID is a compact access control unit equipped with an RFID card reader and a touch numeric keypad. The unit has a multi-frequency RFID card reader that allows the use of 125 kHz and 13.56 MHz cards, and therefore fulfills the functions of three individual access units. The device is designed for indoor as well as outdoor installations. It works both indoors and outdoors, under any weather conditions. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

This IP access control unit equipped with a capacitive touch numeric keypad reliably records and evaluates every touch it receives. Once the correct PIN is entered, the unit opens the door. Each user can have their own access code, or several users can share the same PIN. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

It allows to control a second device. It is an unlimited time passive switch of up to 48 V / 2 Amp or an active 12 V / 700 mA switch. It also includes a safety switch to signal the opening of the front panel.

The rear panel is fixed to the wall and its angle (25°) provides better visual coverage of the area in front of the front door. It is only suitable for surface mounting of the dual module versions of the 2N® IP Verso and 2N® LTE Verso intercom systems. The dimensions of the part fixed to the wall are 114 x 239 mm. The dimensions of the area to which the intercom is connected are 103 x 234 mm. Suitable for outdoor use. Universal - to change from left to right. Space for connection cables.

Thanks to its optical sensor it provides maximum safety, high reliability and a quick response to fingerprint reading. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.