English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 1444
    UTC™ Aritech™ 3000 Series Addressable MCP - GREEN [DM3000G]
    UTC™ Aritech™ 3000 Series Addressable MCP - GREEN
    Ref.: DM3000G
    Green addressable manual evacuation push button for interiors with a functional indicator. Supplied complete with resettable element, test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements, electronic setup, and wireless addressing. Glass and surface mount box included, ABS material, red color. IP41. Dimensions: 87x87x26mm.
    V.A.T. included
    78.08 €
    UTC™ Aritech™ 3000 Series Addressable MCP - RED [DM3000]
    UTC™ Aritech™ 3000 Series Addressable MCP - RED
    Ref.: DM3000
    Red single action addressable manual call point for indoor use with a functional house on fire indicator. Supplied complete with resettable element, test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements, electronic setup, and wireless addressing. Glass and surface mount box included, ABS material, red color. IP41. Dimensions: 87x87x26mm. Certificates: CE and CPR (EN54 part 11).
    V.A.T. included
    71.47 €
    UTC™ Aritech™ 40 Zone Interface Card [2X-ZI-40]
    UTC™ Aritech™ 40 Zone Interface Card
    Ref.: 2X-ZI-40
    Indicator card of 40 zones with 80 LEDs (breakdown and alarm by zone).
    V.A.T. included
    184.42 €
    UTC™ Aritech™ 4I/4O Analog Control Module [IO2034NC]
    UTC™ Aritech™ 4I/4O Analog Control Module
    Ref.: IO2034NC
    Module with four alarm inputs and four relay outputs (2A 24Vdc). The technical inputs have line supervision, with connection of a NO contact, occupies an address in the loop and is powered by it. Status indicator LED. Certificates: CE and CPR (EN54 part 18).
    V.A.T. included
    128.61 €
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm [DB702]
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm
    Ref.: DB702
    The DB702 is a conventional fire detector base used for all 700 series conventional fire detectors. It includes a normally closed continuity switch to allow for easy cable testing during installation. Inserting a detector into the base “opens” the continuity switch in the base to allow for standard open circuit monitoring. A locking mechanism implementation in conjunction with the detector allows for the detector to be safeguarded against unauthorized removal.
    V.A.T. included
    4.79 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector w/ Relay Output, 57°C Class A2 [DT713-5R]
    UTC™ Aritech™ 700 Series Conventional Heat Detector w/ Relay Output, 57°C Class A2
    Ref.: DT713-5R
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified. The DT713-5R has the same specifications as the DT713-5, but in addition includes a built in potential free changeover relay.
    V.A.T. included
    64.05 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 57°C Class A2 [DT713-5]
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 57°C Class A2
    Ref.: DT713-5
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified.
    V.A.T. included
    19.59 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B [DT713-7]
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B
    Ref.: DT713-7
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.
    V.A.T. included
    51.45 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output [DP721RT]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output
    Ref.: DP721RT
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    76.50 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output [DP721T]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output
    Ref.: DP721T
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    61.94 €
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Relay Output [DP721R]
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Relay Output
    Ref.: DP721R
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    74.74 €
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Remote Indicator Output [DP721I]
    UTC™ Aritech™ 700 Series Conventional Optical Smoke Detector w/ Remote Indicator Output
    Ref.: DP721I
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    27.35 €
    UTC™ Aritech™ 990 Series Addressable Manual Call Point - Yellow [DMN960Y]
    UTC™ Aritech™ 990 Series Addressable Manual Call Point - Yellow
    Ref.: DMN960Y
    The DMN960Y is a surface mount, YELLOW addressable 990 Series manual call point with a high strength plastic housing. The LED indicator provides visual confirmation of alarm initiation. The test key (included with each unit) facilitates functional testing of the call point. The manual call point is delivered complete with resetable element. Addressable manual call point. LED alarm indicator. Tamper resistant break glass design. Easy to test with self reset. Fast response.
    V.A.T. included
    130.53 €
    UTC™ Aritech™ 990 Series Addressable Manual Call Point With Isolator [DMN990I]
    UTC™ Aritech™ 990 Series Addressable Manual Call Point With Isolator
    Ref.: DMN990I
    The DMN990I is a surface mount, RED addressable 990 Series manual call point with a high strength plastic housing. The dual LED indicator provides visual confirmation of alarm initiation as well as isolator status when the built-in short circuit isolator is activated. The test key (included with each unit) facilitates functional testing of the call point. The manual call point is delivered complete with glass, but a resetable element can be installed as an option at any time.
    V.A.T. included
    97.16 €
    UTC™ Aritech™ 990 Series IP67 Addressable Manual Call Point With Isolator [DMN960IE]
    UTC™ Aritech™ 990 Series IP67 Addressable Manual Call Point With Isolator
    Ref.: DMN960IE
    The DMN960IE is an addressable, waterproof manual call point designed for use outdoors and in places where moisture and dirt may be a problem. It is compliant with EN54-11/17 and can be used with the 900 series device range on Aritech addressable panels. It is shipped with an easily resettable element rather than a break glass. IP67 waterproof. Tamper resistant break glass design. LED alarm indicator. Resettable element. Plug and play terminal connections for fast wiring.
    V.A.T. included
    403.28 €
    UTC™ Aritech™ Analogic Base with Integrated Sounder (Red) [DB2368IAS-R]
    UTC™ Aritech™ Analogic Base with Integrated Sounder (Red)
    Ref.: DB2368IAS-R
    Red base sounder with integrated isolator for Aritech™ analogical panels. Can be installed as the base of a detector of the 2000 series or simply as a sounder for what is required the AS2368CAP-R cover. Various tones The entire 2000 series works on 2 wires and is wired directly to the bus without the need for external power. Certificates: CE and CPR (EN54 part 3).
    V.A.T. included
    Consult
    UTC™ Aritech™ Analogic Base with Integrated Sounder (White) [DB2368IAS-W]
    UTC™ Aritech™ Analogic Base with Integrated Sounder (White)
    Ref.: DB2368IAS-W
    White base sounder with integrated isolator for Aritech analogical panels. It can be installed as the base of a detector of the 2000 series or simply as a sounder for what it needs of the AS2368CAP-W cover. Various tones The entire 2000 series works on 2 wires and is wired directly to the bus without the need for external power. Certificates: CE and CPR (EN54 part 3).
    V.A.T. included
    145.08 €
    UTC™ Aritech™ Analogic CO + Thermovelocimetric Detector Head [DT992CO]
    UTC™ Aritech™ Analogic CO + Thermovelocimetric Detector Head
    Ref.: DT992CO
    Analogical detector head (thermovelocimetric and CO), 990 series, for Aritech™ analogic panels. It has 5 modes of operation depending on the temperature and CO sensitivity required. The temperature and CO alarms are treated independently. Requires DB950 base, not included. Certificates: CE and CPR (EN54 part 5).
    V.A.T. included
    182.35 €
    UTC™ Aritech™ Analogic Optical + Tempature Detector Head [DP2061T]
    UTC™ Aritech™ Analogic Optical + Tempature Detector Head
    Ref.: DP2061T
    Multi-criteria algorithmic analogic detector head (optical smoke and temperature) for Aritech™ panels, with microprocessor, dual indicator LED with total vision and remote pilot output, anti-theft head system, micro grid protection for dirty environments, compensation algorithmic for dirt and contacts made of stainless steel, white ABS material. Complete self-diagnosis Precise DB200X base socket, not included. Certificates: CE and CPR (EN54 part 5 and 7).
    V.A.T. included
    85.11 €
    UTC™ Aritech™ Analogic Optical + Temperature Detector Head [DP991T]
    UTC™ Aritech™ Analogic Optical + Temperature Detector Head
    Ref.: DP991T
    Multi-criteria (optical smoke and temperature) analogical detector head, 990 series, for Aritech™ analogical panels. Microprocessor, double led indicator with total vision. Anti-theft head system, stainless steel contacts, white ABS material. Precise base DB950, not included. Certificates: CE and CPR (EN54 parts 5 and 7).
    V.A.T. included
    94.23 €
    UTC™ Aritech™ Analogic Optical Detector Head [DP2061N]
    UTC™ Aritech™ Analogic Optical Detector Head
    Ref.: DP2061N
    Algorithmic analogic optical smoke detector head for Aritech™ analogic panels, with microprocessor, removable and replaceable optical camera, micro protection grid for dirty environments, algorithmic compensation of dirt and algorithm to improve the robustness against electromagnetic interference, double indicator LED with total view and exit for remote pilot, system anti theft of the head, stainless steel contacts, white ABS material. Complete self-diagnosis Precise DB200X base socket, not included. Certificates: CE and CPR (EN54 part 7).
    V.A.T. included
    58.66 €
    UTC™ Aritech™ Analogic Optical Detector Head [DP991]
    UTC™ Aritech™ Analogic Optical Detector Head
    Ref.: DP991
    Analogical optical smoke detector head, 990 series, for Aritech™ analogical panels. Microprocessor, algorithmic compensation of dirt and double led. Anti-theft head system, stainless steel contacts, white ABS material. Precise base DB950, not included. Certificates: CE and CPR (EN54 part 7).
    V.A.T. included
    81.00 €
    UTC™ Aritech™ Analogic Pilot [AI2672]
    UTC™ Aritech™ Analogic Pilot
    Ref.: AI2672
    Analogic indicator action pilot for the 2000 series of very low consumption and great luminosity. Ceiling or wall mounting. IP50. Dimensions: 85 x 85 x 29 mm. Working temperature: -10ºC to 50ºC.
    V.A.T. included
    175.55 €
    UTC™ Aritech™ Analogic Thermovelocimetric Detector Head [DT2063N]
    UTC™ Aritech™ Analogic Thermovelocimetric Detector Head
    Ref.: DT2063N
    Algorithmic analogic thermovelocimetric + heat detector head, for Aritech™ analogic panels, with microprocessor, real-time temperature reading, dual indicator LED with total vision, remote pilot output, white ABS material. Complete self-diagnosis. Requires DB200X base socket, not included. Certificates: CE and CPR (EN54 part 5).
    V.A.T. included
    63.09 €
    SYSAWAY© 2024 All rights reserved