Digital keypad that allows the door to be opened by entering a 4- to 6-digit code previously programmed in the central controller, necessary for its operation. For centralized access control installations, where a PC code change or event registration is required, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, offices, garages. Requires an external centralized controller such as ACMAX, AC-PLUS or IP_AXES. Wiegand 4 or 8 bit keypad protocol. IPK 5409. 12VDC supply.

Access control module, to be incorporated into door entry/video entry panels. Digital keypad that allows the door to be opened by entering a previously programmed 4 to 6 digit code in the central controller, necessary for its operation. Skyline is the "modular" type entrance panel line. This new model of plate is more robust, more luxurious and of higher aesthetic and functional quality. It is characterized by its curved-convex profile. They are made of anodized aluminum, highly resistant to weathering and climatic changes. It incorporates new materials such as chrome plated zamak and buttons. For centralized access control installations, where a PC code change or event registration is required, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, offices, garages. 12VDC power. Wiegand 4 or 8 bit keypad protocol. IPK 5407.

Interface that allows the local connection between the PC (serial port) and the installation, thus being able to configure, control and manage the installations. Used for maintenance of installations that do not have the PC permanently connected, as an installer tool.

In the home, the Citymax surface-mounted telephone. On the street, the City Classic goalkeeper plate, of great resistance and quality. City Classic is the original and avant-garde curved profile entrance panel from FERMAX. Endowed with a genuinely urban character, it is the ideal line for door entry installations in any type of building. Made of anodized aluminum with great resistance to weathering and climatic changes. Includes: 8300.- CITYLINE CLASSIC 1/L plate and emp box. (Embed box included ref. 8948). S1 entrance panel: 130x128mm. Emp box kit S1: 115x114x45mm. 80447.- CITYMAX BASIC telephone. 4802.- 12VAC/1A-DIN4 power supply.

In the home, the Citymax surface-mounted telephone. On the street, the City Classic goalkeeper plate, of great resistance and quality. City Classic is the original and avant-garde curved profile entrance panel from FERMAX. Endowed with a genuinely urban character, it is the ideal line for door entry installations in any type of building. Made of anodized aluminum with great resistance to weathering and climatic changes. Includes: 8301.- CITYLINE CLASSIC 2/L plate and emp box. (Embed box included ref. 8948). S1 entrance panel: 130x128mm. Emp box kit S1: 115x114x45mm. 80447.- CITYMAX BASIC telephone (2 units). 4802.- 12VAC/1A-DIN4 power supply.

The Userplus programmer is a desktop tool that allows you to manage installations. Soft-UserPlus is software designed to manage installations and configure equipment from the AXESKEY range. The kit consists of the following elements: (1) Memory dongle with the Soft-UserPlus management program. USB cable for connecting the USERPLUS with the PC. Installation guide. USERPLUS programming tool.

The kit consists of a metal box with power supply, an IP central unit and an I/O expander. Controlled doors can have input or output readers, both FPAC-MAX (RS-485) and Wiegand footprint. Each controlled door has a 0.2 A current output for readers and a 1.0 A current output for door openers and other door devices. The backup battery charging current (optional) can be set to 0.3A or 0.6A. The entire system is powered from the power supply included in the kit. Includes: BOX-IP15 metal box. PWR2D 13.8V power supply. AC-MAX central unit in TCP/IP network. Manages up to 2 doors each door with one entry reader per door or with entry reader and exit reader per door, therefore it allows the connection of up to 4 Wiegand readers (2 entry and 2 exit) or 4 fingerprint readers FPAC-MAX (2 input and 2 output). EXP2D I/O Expander.

The kit consists of a metal box with power supply, an IP central unit and an I/O expander. Controlled doors can have input or output readers, both FPAC-MAX (RS-485) and Wiegand footprint. Each controlled door has a 0.2 A current output for readers and a 1.0 A current output for door openers and other door devices. The backup battery charging current (optional) can be set to 0.3A or 0.6A. The entire system is powered from the power supply included in the kit. Includes: BOX-IP16 metal box. PWR4D 13.8Vdc power supply. AC-MAX central unit in TCP/IP network. It manages up to 4 doors each door with an input reader, therefore it allows the connection of up to 4 Wiegand readers or 8 FPAC-MAX fingerprint readers (4 input and 4 output). EXP4D I/O Expander.

Set of dividers for embedding boxes.

With this free application you will be able to use the call diversion functionality included as standard in FERMAX MEET systems, provided that your installation is connected to the Internet and properly configured and you have a user account provided together with your home monitor. Thanks to the cloud infrastructure provided by FERMAX the installation is very simple. A community internet connection is required for the MEET system network. The upload bandwidth must be at least 3Mb dedicated per entrance panel.

Bracket for mounting MIO / WIT monitors on the wall. Includes monitor connection cables. MEET system.

Set of dividers for embedding boxes.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x128x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x151x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x175x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x199x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x246x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x294x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x341x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x389x33 mm (horizontal-vertical-depth).

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.

Constructed of stainless steel, it is specially designed for mounting MILO 1L panels in places where it is not possible to embed (marble walls, iconic buildings, etc.). It offers great environmental resistance and protection against shocks and vandalism, apart from an impeccable aesthetic finish.

The MANUAL PROGRAMMING KEYPAD is for maintenance service. Keyboard used to manually unsubscribe a lost card from the reader itself.