This interface connects directly to the RS485 communication bus from Galaxy® and is programmed directly from a keyboard connected to the Galaxy® module. Thanks to the use of this equipment, the installation costs are considerably reduced, without the need for powerful power supplies. Security is reinforced by the use of a digital communication protocol between the control panel and the sensors. It complies with the EN50131 standard, Grade 3. The power consumption of the module: 75 mA nominal, 85 mA max. Maximum number of sensors: 128. Maximum number of outputs: 64. Bus length V-Plex: 1400 m (cable 18AWG UTP). Power: 10.5 - 14.5V. Consumption: 75 mA. Consumption: BUS V-Plex available: 128 mA. Dimensions (with box): 150 x 162 x 39 mm.

The NRXI-GATE gateway allows bidirectional RF communication between the Agile NRX equipment via radio and the fire detection and alarm center. Requires a B501AP base. The NRXI-GATE gateway is an advanced RF device and designed for use with Notifier analogue fire detection and alarm systems that use a compatible patented communication protocol. The gateway contains a wireless transceiver that allows bidirectional RF communication between the Agile NRX equipment via radio and the central fire alarm and detection (ID60, ID3000 or Pearl). Certified according to EN54-25, EN54-17 and EN54-18. Meets the requirements of 2014/53 / EU for compliance with the RED directive.

It is a manual alarm button waterproof and waterproof, via radio addressable from 01 to 159, resettable. Includes status LED and manual test key, designed for use with the NRXI-GATE gateway and mesh operation (Mesh). Includes 4 CR123A batteries. Compatible with OPAL protocol (159 + 159) and CLIP (99 + 99). IP67

Modem for remote bidirectional communications and local programming of some controls (see specifications). It works with power 220 V, 50 hz; and it is supplied with a 9 VAC plug-in transformer. Communication speed up to 2400 Baud. It uses a standard RS232 modem cable with a DB25 connector. It has a separate modular telephone jack to connect a local telephone device; interface cable supplied. Dimensions 150 x 160mm x 45 mm. Contains indicators for: CD Detection Carrier (carrier), OH Offline. RX Receive Data. TX Transmit Data. DTR Terminal Data List.

Wall mounting support for M700 serie modules. Its used to install a unique module in a suitable cabin through two M4 screws.

Directionable alarm push button from 01 to 159 with LED and short-circuit insulator incorporated for NOTIFIER Analogical systems. Includes a platic protection cover, glass and base for surface mounting. Comptatible with OPAL 159+159 and CLIP 99+99 protocols.

Chassis with conventional electronic card.

Loop interface via Radio for analogical system of occasional identification compatible with DXc and ZXs panels of MorleyIAS®. Connected and powersupply by the own loop, bidirectional connection with the fire detection panel with the same protocol than devices connected by wire. Provided with a double orthogonal antenna to ensure communications. MIW-INT can control a maximum of 32 MIW devices (Only 16 can be sounders or control module). Each interface occupy a module direction in the loop and associate up to 7 MIW-EXP expanders to expands the distance or improve the coverage. Programmable through a PC with WireIEX FIRE program via RS232 port or via intern keys and display, Moreove provide a option of devices auto search and indication of low battery for each device.

High power emitting device with battery power for operation with OSI-90. Compatible with OSI-90. Approximately 3 years of useful life.

OSID receiver 7° coverage of 30m up to 150m range. Compatible with OSE-SPW and OSE-SP-01 Distance from 30 to 150 m with OSE-SP-01/W. Requires 12/24VDC power from a power source conforming to EN54/4.

80° OSID receiver for up to 7 transmitters and distances of 6m to 36m using standard power transmitters and 12m to 68m with high power transmitters OSE-HPW or 50m with OSE-HP-01. Requires 12/24VDC power from a power source conforming to EN54/4.

Test station with key and status indicator, surface mounted for linear smoke detectors NFXI-BEAM-T, 6500RS or OSID. Includes RTS151KEY test unit and WM2348E surface base. Requires 24 VDC External Power on the Linear detector. It requires 5 connection wires between the test station and detector.

High power emitting device with wired power for operation with OSI-90. Requires 12/24VDC power from a power source conforming to EN54/4. Compatible with OSI-90. Operating voltage 20 to 30 VDC. Current consumption @ 24 VDC approx. 800µA. Operating temperature: -10° C to 55° C. Relative humidity: 10 to 95% (not condensed). Dimensions. A: 136mm H: 208mm F: 96mm.

OSID installation KIT with laser tool, diagnostic cable and test filter.

Diagnostic USB FTDI cable for 1.5m OSID receiver.

Metal protection grid for OSID transmitter/receiver.

Test filter for OSID - 200 Units

Allows the connection of 1 conventional optical-acoustic intrinsic safety siren IS-mc1. The barrier must be mounted in a safe area outside the risk area.