Made by AGUILERA™ Electrónica in ABS equipped with bayonet contacts, locknuts and rings for cables connections, all in stainless steel. Allows the exchange of conventional detectors. Low version of 10mm, with only a superior input for pipes or suspended ceiling.

Microprocessed unit that manages communications and control for 2 relays (2 different maneuvers). Each output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. Both outputs are: voltage free (contacts normally open NO, normally closed NC) and with voltage (24 V). Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27 VDC. Consumption at rest: 6 mA Consumption at maximum alarm: 54 mA Outputs: Voltage-free contacts. (NA, COMM, NC) 24 V. Maximum resistive load = 2 A / 30 VDC - 0.6 A / 125 VAC. Maximum switching voltage = 125 VDC - 125 VDC. Maximum switching power = 60 W - 62.5 VA. Temperature range: 0 ° to 60 ° C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Activation of each output: fixed red. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Directionable microprocessed unit made by AGUILERA™ ELECTRÓNICA that mange a loop with detectors, push buttons and others conventional devices. Provide a supervided relay output for activation of eVACuation manoeuvre in accordance with EN 54-14. Special to control detectors zones or conventional push buttons in zones where are not installated smart detectors. Allows auxiliary power supply for loop devices. Provides a self insulator that isolates the rest of installation in case of intern short circuit. 2 Wires connection with removable terminal blocks. Power supply: between 18 and 27VDC. Maximum consumption: 900 ?A. Maximum consumption with a auxiliary loop power supply: 44mA. Mounted in ABS box of 105 x 82 x 25mm.

Directionable microprocessed unit made by AGUILERA™ ELECTRÓNICA that manage a loop with detectors, push buttons and others conventional devices. Provide a supervised relay output for activation of eVACuation manoeuvre in accordance with EN54-14 installation standard. Special to control detectors zones or conventional push buttons in zones where are not installated smart detectors. Allows auxiliary power supply for loop devices. Provides a self insulator that isolates the rest of installation in case of intern short circuit. 2 Wires connection with removable terminal blocks. Power supply: between 18 and 27VDC. Maximum consumption: 900 ?A. Maximum consumption with a auxiliary loop power supply: 44mA. Mounted in ABS box of 105 x 82 x 25mm.

Directionable microprocessed unit made by AGUILERA™ ELECTRÓNICA that control a loop with detectors, push buttons and others conventionals devices. Provides a monitored relay output for activation of eVACuation manoeuvre in accordance with EN 54-14 installation standard. Special to control detectors zones or conventional push buttons in zones where are not installed smart detectors. Support auxiliary power supply for loop devices. Provided with self insulator that isolates the rest of the installation in case of intern short circuit. 2 Wires connection with removable terminal blocks. Power supply: between 18 and 27VDC. Maximum consumption: 900 ?A. Maximum consumption loop auxiliary power supply: 44mA. Mounted in ABS box of 105 x 82 x 25mm.

Addressable module developed to control a series of conventional detectors or pushbuttons in a 2-wire controlled loop, which can correspond to a specific area, sector or room.

Developped and made by AGUILERA™ ELECTRÓNICA for their algorithmic system. Possess the same funcionality than box modules, but with compact dimensions 45X30X10 mm. Allows the placement inside devices that control or monitor: sounders, push buttons, special detectors, etc... Its supplied encapsulated, that provide a excelent insulator for its protection in front of short-circuit, powder, humidity, etc...

Developped and made by AGUILERA™ ELECTRÓNICA for their algorithmic system. Possess the same funcionality than box modules, but with compact dimensions 45X30X10 mm. Allows the placement inside devices that control or monitor: sounders, push buttons, special detectors, etc... Its supplied encapsulated, that provide a excelent insulator for its protection in front of short-circuit, powder, humidity, etc...

Developped and made by AGUILERA™ ELECTRÓNICA for their algorithmic system. Possess the same funcionality than box modules, but with compact dimensions 45X30X10 mm. Allows the placement inside devices that control or monitor: sounders, push buttons, special detectors, etc... Its supplied encapsulated, that provide a excelent insulator for its protection in front of short-circuit, powder, humidity, etc...

Module of 8 remote relay for AE/C5-8-16 panel. Provided with NA or NC voltage free contact, individually selectable through a jumper. Realys are individually activated in case of zone alarm. The module requires 24VDC extern power supply. 4 or 6 Wires connection (If its power supplied from the panel). Maximum panel distance 1000m, maximum number of modules:2.

Microprocessed module equipped with a relay output, with line supervision. The output can be customized in the control panel with the name of the place and the maneuver that it executes, and programmed to act with alarms or events of different equipment of the installation. The module monitors faults by open line or by short circuit in the output loop. The output is with voltage: 24 VDC in alarm. Provided with information leds, extractable terminals and circuit protection box. Supply voltage: 18 - 27V. Consumption at rest: 7 mA. Consumption in alarm: 40 mA. Output: 24 V / 1 A max. Temperature range: 0º to 60º C. Cable cross section: 2 x 1.5 mm² + 1 x 0.75 mm². Dimensions: 145 x 86 x 25 mm. LED: Output activation: fixed red. Supervised loop fault: fixed yellow. Communications: flashing red. Fastening: 4 holes 03.5 mm.

Directionable microprocessed untit made by AGUILERA™ ELECTRONICA in accordance with EN 54-18 standard that control the status of 2 inputs: Activation, short line or opened line. Its main application is the supervision of alarm systems (Type 1) as specified in UNE-EN-54-13 standard: Compatitibility assessment of the system components.

Directionable microprocessed unit made by AGUILERA™ ELECTRÓNICA that manage and gives information of 32 outputs installation. Special to configure summary, repeaters and cuadros de maniobras. Output information by connetor. Provided with a self insulator that isolates the panel from the rest of the installation in case of interior short-circuit. Power supply: Between 18 and 27VDC. Consumption: 1 mA. 2 Wires connection with removable terminal blocks. Mounted in ABS box of 105 x 82 x 25mm.

Made by AGUILERA™ Electrónica. Equippment composed by AE002/OP optic detector and metal box, provided with pilot alarm, connector for input of cable and probe tubes that takes indoor measurments.

Smoke detector made by AGUILERA™ ELECTRÓNICA according to UNE EN 54-7 standards, with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit that manage a optical smoke sensor. Its function is to tke light measures that disperse smoke particles, assess the density and the rate of increase in the time and to send an information to the analized central to take an alame decision when it reach the set parameters. Includes a audible warning that activate in case of alarm the smoke detector or if it has been programmated in the central, with any alarm device in its zone. Sound intensity 85dB. Maximum consumption in alarm 13mA.

Smoke detector made by AGUILERA™ ELECTRÓNICA according to UNE EN 54-7 standards, with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit that manage a optical smoke sensor. Its function is to tke light measures that disperse smoke particles, assess the density and the rate of increase in the time and to send an information to the analized central to take an alame decision when it reach the set parameters.

Formed by camera obscura, design with a labyrinth that allows the access of smoke but not to light, provided of sender and receiver that operates according to principle of scattered light and a circuit with electronic for a correct control. Output for remote alarm indicator, voltage stabilizer and automatic check operation, visible in a LED . Mounted in ABS white housing of 105 Ø x 68 mm high. Maximum consumption: 180 ?A in standby and 22mA in alarm. No includes the socket. Developped and made by AGUILERA™ Electrónica according to UNE EN54-7 standard. Certified by AENOR.

Formed by camera obscura, design with a labyrinth that allows the access of smoke but not to light, provided of sender and receiver that operates according to principle of scattered light and a circuit with electronic for a correct control. Output for remote alarm indicator, voltage stabilizer and automatic check operation, visible in a LED . Mounted in ABS white housing of 105 Ø x 68 mm high. Maximum consumption: 180 ?A in standby and 22mA in alarm. No includes the socket. Developped and made by AGUILERA™ Electrónica according to UNE EN54-7 standard. Certified by AENOR.

Optic smoke detector certified LPCB according to EN 54-7 standard. Low perfil detectors with attractive design. Made with SMD tehnology, provided of a double light indicator, remote alarm output with the same interchangeable base for easy connection. Socket and powder protector included. 2 Wires connection. Power supply between 15 and 35 VDC. Consumption: 35 ?A (Standby), 80mA (Alarm). Dimensions: Ø 99 mm, high with base included: 46mm.

Indicated for indoors, IP40, provided with two adhesives signs: EXTINCION DISPARADA - FUEGO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS material. Consumption 95mA/24Vcc. Sound intensity: 108dB/1m. Dimensions: 365 x 180 x 50 mm.

Indicated for outdoors, IP65. Provided with two adhesives signs: EXTINCION DISPARADA - FUEGO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS material. Consumption 95mA/24Vcc. Sound intensity: 108dB/1m. Dimensions: 365 x 180 x 50 mm.

Indicated for indoors, IP40. Provided with a adhesive sign: MONOXIDO DE CARBONO. Can select a fix sound, blinking or without sound and fix or blinking illumination. ABS Material. Dimensions:365 x 180 x 50 mm. Consumption 95mA/24Vcc. Sound intensity 108dB/1m.

Optical smoke detector that operates according to the principle of scattered light (Tyndall effect). It is indicated to detect fires in its first phase of smoke, before flames are formed or dangerous temperature increases occur. Formed by a dark camera complemented by a transmitter and a receiver that detect the presence of particles inside, governed by a microcontroller that is programmed from the central setting the operating parameters. Certificate according to the Construction Products Directive (DPC.) According to Standard EN 54-7: 2001. Supply voltage: 20-27 V. Consumption at rest: 3 mA. Consumption in alarm: 13 mA. Temperature range: 0º - 60º C. Humidity range: 10% - 90%. Housing material: ABS white. Alarm: fixed red. Dimensions: Ø105 mm. 76 mm with high base.

Optic smoke and heat thermal detector (class A). Certified LPCB according to EN54-5 and EN 54-7 standards. Low perfil detectors with attractive design. Made with SMD technology, provided of a double light indicator, remote alarm output and with the same interchangeable base for easy connection. Socket and powder protector included. 2 Wires connection. Power supply between 15 and 35 VDC. Consumption: 35 ?A (Standby), 80mA (Alarm). Dimensions: Ø 99 mm, high with base included: 61mm.