English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 103
    UTC™ GST® Gas Extinguishing Warning Indicator [C-9318]
    UTC™ GST® Gas Extinguishing Warning Indicator
    Ref.: C-9318
    C-9318 Gas Extinguishing Warning Indicator (hereinafter called the indicator) is the accessory equipment of a gas extinguishing system. It's usually installed at the entrance of the protected area. After gas is released, the control panel will activate the indicator to give visual indication warning people in field to take relative measures. This indicator is non-addressable and is used together with GST303/GST306 extinguishing control panel.
    V.A.T. included
    77.68 €
    UTC™ GST® Graphic Monitor Center [GST-GMC3.0]
    UTC™ GST® Graphic Monitor Center
    Ref.: GST-GMC3.0
    Free Download from Web. GstGMC Graphic Monitor Centre is a newly developed fire alarm system monitoring software. With friendly interface, the software may support 8 remote client stations plus local monitor station, making complete monitoring and control. Also with OLE for Process Control (OPC), the communication with fire alarm control panel?FACP? can also be integrated into other systems. The related FACP include GST200, GST200-2, GST5000 and GST-IFP8.
    V.A.T. included
    1,983.59 €
    UTC™ GST® Innovation Fixed & Rate-of-Rise Heat Detector /w Remote Indicator Output [DI-9103E]
    UTC™ GST® Innovation Fixed & Rate-of-Rise Heat Detector /w Remote Indicator Output
    Ref.: DI-9103E
    DI-9103E intelligent rate of rise and fixed temperature heat detector is a new addressable fire alarm device cooperating with GST intelligent fire alarm control panels(FACP) to build a fire detection system. The detector shows fire alarm by the LED indicator and transmits the signal to the FACP.
    V.A.T. included
    60.66 €
    UTC™ GST® Innovation Multi Sensor /w Remote Indicator Output [DI-9101E]
    UTC™ GST® Innovation Multi Sensor /w Remote Indicator Output
    Ref.: DI-9101E
    DI-9101E intelligent combination heat photoelectric smoke detector integrates photoelectric detection and fixed temperature and rate of rise detection technology by combining smoke sensor and semi-conductor heat sensor in mechanism and circuitry structure. Just because of the combination of smoke detection and heat detection, it not only overcomes the disadvantage that detectors using common infrared scattering technology are insensitive to black smoke with small particles, but also can pick up fire with obvious rise of temperature such as alcohol flame, thus extending its application range.
    V.A.T. included
    81.83 €
    UTC™ GST® Innovation Optical Detector /w Remote Indicator Output [DI-9102E]
    UTC™ GST® Innovation Optical Detector /w Remote Indicator Output
    Ref.: DI-9102E
    DI-9102E Intelligent Photoelectric Smoke Detector is a new generation product, connected with intelligent fire alarm control panel to form fire alarm system. The detector turns on fire LED to indicate fire alarm condition and transmits the fire signal to the control panel. The detector is developed from sensing chamber by scattering theory. Besides stable performance and easy maintenance, the detector has the ability to endure dust contamination and environmental light. The detector utilizes drift compensation algorithm: When the environment is changing, such as dust accumulation, humidity and temperature changing, the detector can figure out these drift variation to make up for sensitivity, thus the amount of smoke needed to generate an alarm remains constant, irrespective of environmental conditions.
    V.A.T. included
    65.45 €
    UTC™ GST® Innovation Range Addr. Base Sounder/Visible Indicator (Loop Powered) [DI-9406]
    UTC™ GST® Innovation Range Addr. Base Sounder/Visible Indicator (Loop Powered)
    Ref.: DI-9406
    DI-9406 Addressable Flashing Beacon Base is installed in field to warn people for evacuation with audible and visual alarm in case of a confirmed fire. The flashing beacon base can communicate with fire alarm control panel (FACP) through a built-in microprocessor. On receiving a start command from the FACP, the microprocessor will control the buzzer to generate the pre-set fire alarm sound and light the bright LED.
    V.A.T. included
    119.58 €
    UTC™ GST® Innovation Standard Detector Base for Addressable and Conventional (when using EOLR) [DB-01]
    UTC™ GST® Innovation Standard Detector Base for Addressable and Conventional (when using EOLR)
    Ref.: DB-01
    DB-01 Base is used to mount digital and innovation conventional smoke, heat and combination detectors as their conductive base. It’s made of flame-resistant plastic ABS. It features attractive appearance, novel structure and stable performance. Its flame class is V-0. During installation, you can easily fix the base before connecting cables, and then twist the detector onto the base.
    V.A.T. included
    5.47 €
    UTC™ GST® Intelligent Addr. Dual Input/Output Module (24VDC) [I-9303]
    UTC™ GST® Intelligent Addr. Dual Input/Output Module (24VDC)
    Ref.: I-9303
    Intelligent addressable input/output module. With 2 indipendant volt free relay with N/O and N/C change over contacts that can be driven via the fire alarm loop. Commonly used for overriding equipment such as AHU’s, smoke extracts, lift returns, auto dialer, BMS, etc. The input can be linked through a volt free contact switch output of ancillary equipment reporting to the fire alarm controller. According to the pre-inputted cause and effects interface programming, the alarm controller sends out a start command to the equipment required to start. After receiving the command, the module activates its relay to change state. Once the equipment under control has operated a confirmation signal can be sent back to the fire alarm controller. Electronic addressing can be done through Handheld Programming tool (P-9910B), purchased separately.
    V.A.T. included
    124.78 €
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A) [PSU24-10A]
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A)
    Ref.: PSU24-10A
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Addressable intelligence for monitoring and reporting to main fire alarm panel. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Addr. PSU (24VDC 5A) [PSU24-5A]
    UTC™ GST® Intelligent Addr. PSU (24VDC 5A)
    Ref.: PSU24-5A
    24 volt DC intelligent PSU, 5 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Addressable intelligence for monitoring and reporting to main fire alarm panel. Mains supply 230VAC (+10/-15%), 50Hz. Max. Battery Size: 24VDC /12AH sealed lead battery. Dimension: 400 x 318 x 128 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Addr. Remote Indicator [ I-9314]
    UTC™ GST® Intelligent Addr. Remote Indicator
    Ref.: I-9314
    I-9314 intelligent door lamp is used to display the alarms of indoor detectors. It is usually installed on sites easy to view, such as above the door of meeting room, dining room and bedroom. When the indoor detector alarms, the LED on the lamp will flash so that personnel can know the detector has been triggered alarm without entering the room.
    V.A.T. included
    69.90 €
    UTC™ GST® Intelligent Addr. Single Input Module, Loop Powered [I-9300]
    UTC™ GST® Intelligent Addr. Single Input Module, Loop Powered
    Ref.: I-9300
    I-9300 Addressable Input Module is designed to receive normally open or normally closed switch signal from fire devices with coincidence functions, and transmits these messages to fire alarm control panel (FACP) with coincidence detection function. When a device of this kind is activated, the module can send the output signal through signal loop to FACP to alarm or activate relative devices.
    V.A.T. included
    56.88 €
    UTC™ GST® Intelligent Addr. Sounder (24VDC) [I-9404]
    UTC™ GST® Intelligent Addr. Sounder (24VDC)
    Ref.: I-9404
    The I-9404 is a detachable, surface mounted sounder. The audio efficiency and sound distribution generate over 85 dB at 3 meter distance giving an excellent audibility from the device location. The GST sounder series are convenient plug and turn installing method, two part construction with base mounted termination allows easy installation and avoiding the wiring and connection problem associated with traditional sounder.
    V.A.T. included
    119.80 €
    UTC™ GST® Intelligent Addr. Zone Monitor Unit [I-9319]
    UTC™ GST® Intelligent Addr. Zone Monitor Unit
    Ref.: I-9319
    I-9319 intelligent zone monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR) or Active End of Line unit (AEOL recommended). The fault massage includes open circuit, short circuit or any removal of the detectors. Electronic addressing can be done through Handheld Programming tool (P-9910), purchased separately.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries) [PSU24-10]
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries)
    Ref.: PSU24-10
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries) [PSU24-5]
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries)
    Ref.: PSU24-5
    24 volt DC intelligent PSU, 5 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 230VAC (+10/-15%), 50Hz. Max. Battery Size: 24VDC /12AH sealed lead battery. Dimension: 400 x 318 x 128 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Reflective Beam Detector [ I-9105R]
    UTC™ GST® Intelligent Reflective Beam Detector
    Ref.: I-9105R
    I-9105R Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios
    V.A.T. included
    831.23 €
    UTC™ GST® Intelligent Reflective Beam Detector [I-9105R]
    UTC™ GST® Intelligent Reflective Beam Detector
    Ref.: I-9105R
    I-9105R Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios
    V.A.T. included
    816.27 €
    UTC™ GST® Intelligent Sounder/Visible Indicator (24VDC) [I-9403]
    UTC™ GST® Intelligent Sounder/Visible Indicator (24VDC)
    Ref.: I-9403
    The I-9403 is a detachable, surface mounted sounder and strobe while the I- 9404 is identical in appearance and features to the I-9403 but without strobe element. The audio efficiency and sound distribution generate over 85 dB at 3 meter distance giving an excellent audibility from the device location. Using six highlights LED’s for high intensity visual alarm to warn the people. The GST sounder series are convenient plug and turn installing method, two part construction with base mounted termination allows easy installation and avoiding the wiring and connection problem associated with traditional sounder.
    V.A.T. included
    119.80 €
    UTC™ GST® Intelligent Ultraviolet Flame Detector [I-9104]
    UTC™ GST® Intelligent Ultraviolet Flame Detector
    Ref.: I-9104
    The I-9104 Intelligent Ultraviolet Flame Detector capable of detecting the ultraviolet (UV) rays emitted by a burning substance, ideal for areas where you would expect heat and smoke but not flames such as boiler and generator rooms, also suitable for high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored. The I-9104 sensor provides an ultraviolet photosensitive tube, with highly sensitive, reliable, dust-resistant, corrosion-proof and moisture-resistant qualities. The detector will initiate an alarm when a flame > 3cm is detected at a distance of up to 6 meters, with a total effective range of up to 12 meters.
    V.A.T. included
    193.61 €
    UTC™ GST® Portable Programming Tool [P-9910B]
    UTC™ GST® Portable Programming Tool
    Ref.: P-9910B
    The P-9910 GST protocol programming tool, capable of reading and writing address codes, displaying model number, year of manufacture and batch number, plus display and adjust analogue sensitivity. Enable to adjust alarm threshold, N/C or N/O and switch on or off the rate of rise of dual heat detector.
    V.A.T. included
    275.98 €
    UTC™ GST® Relay Board for GST102A [RB102A]
    UTC™ GST® Relay Board for GST102A
    Ref.: RB102A
    For zonal fault & fire alarm signal output. The relay board for conventional panel, provides additional signal outputs foe zonal fire and fault conditions. In case of fire or fault occurs in any zone, the corresponding relay will be activated, so that the conventional system can be integrated to 3rd party system. Output mode: normally open dry contact. Output capacity: 3A/24VDC/125VAC. WEEE & RoHS compliant. Standards: CE / CPD / EN54-2 / EN54-4. Certifications: LPCB. BS5839-1 compliant.
    V.A.T. included
    55.20 €
    UTC™ GST® Relay Board for GST104A [RB104A]
    UTC™ GST® Relay Board for GST104A
    Ref.: RB104A
    For zonal fault & fire alarm signal output. The relay board for conventional panel, provides additional signal outputs foe zonal fire and fault conditions. In case of fire or fault occurs in any zone, the corresponding relay will be activated, so that the conventional system can be integrated to 3rd party system. Output mode: normally open dry contact. Output capacity: 3A/24VDC/125VAC. WEEE & RoHS compliant. Standards: CE / CPD / EN54-2 / EN54-4. Certifications: LPCB. BS5839-1 compliant.
    V.A.T. included
    86.41 €
    UTC™ GST® Relay Board for GST108A [RB108A]
    UTC™ GST® Relay Board for GST108A
    Ref.: RB108A
    For zonal fault & fire alarm signal output. The relay board for conventional panel, provides additional signal outputs foe zonal fire and fault conditions. In case of fire or fault occurs in any zone, the corresponding relay will be activated, so that the conventional system can be integrated to 3rd party system. Output mode: normally open dry contact. Output capacity: 3A/24VDC/125VAC. WEEE & RoHS compliant. Standards: CE / CPD / EN54-2 / EN54-4. Certifications: LPCB. BS5839-1 compliant.
    V.A.T. included
    154.83 €
    SYSAWAY© 2024 All rights reserved