English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 181
    OPTEX® REDWALL™ SIP-404-IP-BOX Outdoor PIR IP Motion Detector [SIP-404-IP-BOX]
    OPTEX® REDWALL™ SIP-404-IP-BOX Outdoor PIR IP Motion Detector
    Ref.: SIP-404-IP-BOX
    Outdoor PIR detector connectable with TCP/IP Redwall-V™ interface. Range: 40m x 4m. These detectors has an anti-rotacion and anti-masking function. Likewise it can detect vandalism attempts or sensor manipulations. These functions improves security during operation. Operating temperature: -25 a +60°C, -40 a +60°C with heating unit. Compatible with most of VMS platforms. With a box to place PIE-1.
    V.A.T. included
    Consult
    OPTEX® REDWALL™ SIP-404/5 Outdoor PIR Motion Detector [SIP-404/5]
    OPTEX® REDWALL™ SIP-404/5 Outdoor PIR Motion Detector
    Ref.: SIP-404/5
    Redwall-V™ Outdoor PIR detector with zero angle independent detector (5m x 5m). Range: 40m x 4m. Maximum height installation up to 4m. This sensors has a smart detection system which use environmental setting datas, such as temperature and illumination conditions to adjust automatically the sensitivity. These detectors have anti-rotation and anti-masking functions. Likewise it can detect vandalism attempts or sensor manipulations through an independent alarm output.
    V.A.T. included
    Consult
    OPTEX® REDWALL™ SIP-404/5-IP-BOX Outdoor PIR IP Motion Detector [SIP-404/5-IP-BOX]
    OPTEX® REDWALL™ SIP-404/5-IP-BOX Outdoor PIR IP Motion Detector
    Ref.: SIP-404/5-IP-BOX
    Outdoor PIR detector connectable with TCP/IP Redwall-V™, PoE interface, with independent detector for zero angle (5m x 5m). Range: 40m x 4m. Compatible with most of VMS platforms. With a box to place PIE-1.
    V.A.T. included
    Consult
    OPTEX® REDWALL™ SIP-404WF Outdoor PIR Motion Detector [SIP-404WF]
    OPTEX® REDWALL™ SIP-404WF Outdoor PIR Motion Detector
    Ref.: SIP-404WF
    Redwall-V™ Outdoor PIR detector, Low power consumption: 3 - 9VDC, 40 ?A (in standby mode) 5 mA maximum. Range: 40mx 4m. Maximum installation height up to 4m. Can be used together with REDWALL™ Wire-free WF100DT (Digital transmitter), WF100CU (Control unit) and WF100EU (Expansion unit), if its necessary, to form a complet radio system. Current draw:40 ?A (In standby), 5 mA maximum (LED ON in functioning).
    V.A.T. included
    Consult
    OPTEX® REDWALL™ SIP-5030 Outdoor PIR Motion Detector [SIP-5030]
    OPTEX® REDWALL™ SIP-5030 Outdoor PIR Motion Detector
    Ref.: SIP-5030
    Redwall-V™ Outdoor PIR detector with zero angle independent detector (5m x 5m). Range: 50m x 30m. Covering (Zero zone): 3 x 5 m installed at 2,3 m height, 6 x 9 m installed at 4 height. Detection of ambient temperature and light for an automatic management of the sensitivity. Advanced detection algorithm. Piro-elements Double dual/uno quad with Double patented conductive shield for core area.
    V.A.T. included
    Consult
    OPTEX® REDWALL™ SIP-5030-IP-BOX Outdoor PIR IP Motion Detector [SIP-5030-IP-BOX]
    OPTEX® REDWALL™ SIP-5030-IP-BOX Outdoor PIR IP Motion Detector
    Ref.: SIP-5030-IP-BOX
    Outdoor PIR detector connectable with TCP/IP Redwall-V™, PoE interface, with independent detector for zero angle (5m x 5m). Range: 50m x 30m. Compatible with most of VMS platforms. With a box to place PIE-1.
    V.A.T. included
    Consult
    OPTEX® RXC-DT Motion Detector - G2 [RXC-DT]
    OPTEX® RXC-DT Motion Detector - G2
    Ref.: RXC-DT
    PIR QUAD + microwave double technology detector. Fresnel spherical multi-focus lens. Range: 12 x 12m, 85º (78 PIR zones). Microwave range selection (short / long). Sensitivity from 2º C to 0.6 m / sec. RFI protection (10 V / m from 100MHz to 1 GHz). Interchangeable PCB with RXC-ST, support with multi-adjustments. Power 9.5-16 VDC, consumption 15 mA max. GRADE 2. Dimensions: 93.4 x 61.4 x 46.0 mm.
    V.A.T. included
    Consult
    OPTEX® RXC-DT-X5 DT Detector - G2 [RXC-DT-X5]
    OPTEX® RXC-DT-X5 DT Detector - G2
    Ref.: RXC-DT-X5
    Digital DT detector with 12 x 12 m coverage. Animal immunity. High density pattern. Quad zone logic. Advanced sealing optics. Advanced temperature compensation. Animal immunity. X-band microwave frequency (10,525 GHz). Mounting height from 1.5 to 2.4 m. Power: 9.5 to 16 Vdc. Maximum consumption: 15 mA. Operating temperature: -20 to 45 ºC. Dimensions: 93.4 x 61.4 x 46 mm. EN50131 Grade 2 Certificate.
    V.A.T. included
    Consult
    OPTEX® RXC-ST Motion Detector - G2 [RXC-ST]
    OPTEX® RXC-ST Motion Detector - G2
    Ref.: RXC-ST
    Indoor motion detector. PIR QUAD, which means that it incorporates Quad Zone Logic that allows a more precise detection and discrimination of people. Spherical lenses to maximize the performance of the Quad Zone Logic. Range: 12 x 12 m, 85 °. Longest beam reach 18 x 1.8 m using the optional FL-60N lens. Mounting height: 1.5-2.4m Power 9.5 - 16VDC, maximum consumption 11mA. Certificate Standard EN-50131-1 Grade 2.
    V.A.T. included
    Consult
    OPTEX® Seismic Detector [VD-500]
    OPTEX® Seismic Detector
    Ref.: VD-500
    Seismic detector for safes. Reach from 3 to 5 m. 4 sensitivity levels, 3 seismic detection channels, 98º thermal detection. Power 9-15 VDC, consumption: 10mA. Measurements: 86 x 41 x 23 mm (LxWxH).
    V.A.T. included
    Consult
    OPTEX® Shock/Vibration Sensor [VIBRO]
    OPTEX® Shock/Vibration Sensor
    Ref.: VIBRO
    Shock and vibration detector, with range from 1.5 to 3.5 m, depending on the surface. Measurements: 93 x 24 x 25 mm (LxWxH).
    V.A.T. included
    Consult
    OPTEX® SL-100TNR Active IR Outdoor Barrier [SL-100TNR]
    OPTEX® SL-100TNR Active IR Outdoor Barrier
    Ref.: SL-100TNR
    2 Beams wireless AIR barrier. Range: 30m Works with D size lithium battery from 3.6 to 3.9VDC. (SB-D02HP from VITZROCELL recommended) (2 for each transmitter / receiver) or CR123A 3.0 VDC lithium battery (8 for each transmitter / receiver). Easy frontal access to change batteries (Batteries not included).
    V.A.T. included
    Consult
    OPTEX® SL-200QDM© Active IR Outdoor Barrier [SL-200QDM(C)]
    OPTEX® SL-200QDM© Active IR Outdoor Barrier
    Ref.: SL-200QDM(C)
    4 Beams Active IR barrier. Range: 60m. 4 Frequency channels. Double modulation. Advanced model. Thanks to I.A.S.C. and A.T.P.C. functions obtain an beam power self-regulation, adaptating to particular conditions and reducing false alarms due to fog, signal reflections, etc.. Alarm input for alarm retransmission. IP65. Possibility to add a solar battery (SBU-4)(Not included).
    V.A.T. included
    Consult
    OPTEX® SL-200QDP (C) Active IR Outdoor Barrier [SL-200QDP (C)]
    OPTEX® SL-200QDP (C) Active IR Outdoor Barrier
    Ref.: SL-200QDP (C)
    4 Beams Active IR barrier. Range: 60m. 4 Frequency channels. Double modulation. Dials for horizontal or vertical alignation (Not necessary to use a screwdriver). Bright colours interior to facilitate optic alignment. Provides a selector to controll beam signal power. IP65.
    V.A.T. included
    Consult
    OPTEX® SL-200QDP (C) Active IR Outdoor Barrier [SL-200QDP (C)]
    OPTEX® SL-200QDP (C) Active IR Outdoor Barrier
    Ref.: SL-200QDP (C)
    4 Beams Active IR barrier. Range: 60m. 4 Frequency channels. Double modulation. Dials for horizontal or vertical alignation (Not necessary to use a screwdriver). Bright colours interior to facilitate optic alignment. Provides a selector to controll beam signal power. IP65.
    V.A.T. included
    Consult
    OPTEX® SL-200QDP-BT Active IR Outdoor Barrier [SL-200QDP-BT]
    OPTEX® SL-200QDP-BT Active IR Outdoor Barrier
    Ref.: SL-200QDP-BT
    4 Beams wireless AIR barrier. Range: 60m. 4 Channels. Double modulation. Without housing, special for column assembly.
    V.A.T. included
    Consult
    OPTEX® SL-200QN(C) Active IR Outdoor Barrier [SL-200QN(C)]
    OPTEX® SL-200QN(C) Active IR Outdoor Barrier
    Ref.: SL-200QN(C)
    4 Beams Active IR barrier. Range: 60m. Basic version. Allows column, post or wall assembly. Ideal when there is not beams overlapping problems with others barriers. 2x magnification viewer and dials for horizontal or vertical alignation (Not necessary to use a screwdriver). Bright colours interior to facilitate optic alignment. Tamper (In transmitter as in the receiver). Anti-freeze/frost design. IP65.
    V.A.T. included
    Consult
    OPTEX® SL-200TNR Active IR Outdoor Barrier [SL-200TNR]
    OPTEX® SL-200TNR Active IR Outdoor Barrier
    Ref.: SL-200TNR
    2 Beams wireless AIR barrier. Range: 30m Works with D size lithium battery from 3.6 to 3.9VDC. (SB-D02HP from VITZROCELL recommended) (2 for each transmitter / receiver) or CR123A 3.0 VDC lithium battery (8 for each transmitter / receiver). Easy frontal access to change batteries (Batteries not included).
    V.A.T. included
    Consult
    OPTEX® SL-350QDM© Active IR Outdoor Barrier [SL-350QDM(C)]
    OPTEX® SL-350QDM© Active IR Outdoor Barrier
    Ref.: SL-350QDM(C)
    4 Beams Active IR barrier. Range: 100m. 4 Frequency channels. Double modulation. Advanced model. Thanks to I.A.S.C. and A.T.P.C. functions obtain an beam power self-regulation, adaptating to particular conditions and reducing false alarms due to fog, signal reflections, etc.. Alarm input for alarm retransmission. IP65. Possibility to add a solar battery (SBU-4)(Not included).
    V.A.T. included
    Consult
    OPTEX® SL-350QDP-BT Active IR Outdoor Barrier [SL-350QDP-BT]
    OPTEX® SL-350QDP-BT Active IR Outdoor Barrier
    Ref.: SL-350QDP-BT
    4 Beams wireless AIR barrier. Range: 100m. 4 Channels. Double modulation. Without housing, special for column assembly.
    V.A.T. included
    Consult
    OPTEX® SL-350QDP© Active IR Outdoor Barrier [SL-350QDP(C)]
    OPTEX® SL-350QDP© Active IR Outdoor Barrier
    Ref.: SL-350QDP(C)
    4 Beams Active IR barrier. Range: 100m. 4 Frequency channels. Double modulation. Dials for horizontal or vertical alignation (Not necessary to use a screwdriver). Bright colours interior to facilitate optic alignment. Provides a selector to controll beam signal power. IP65.
    V.A.T. included
    Consult
    OPTEX® SL-350QFR Active IR Outdoor Barrier [SL-350QFR]
    OPTEX® SL-350QFR Active IR Outdoor Barrier
    Ref.: SL-350QFR
    4 Beams wireless AIR barrier. Range: 100m. Works with 3.6 V 13.0 Ah LSH20 modele from SAFT lithium battery (2 or 4 for each transmitter/receiver)(Battery not included) .
    V.A.T. included
    Consult
    OPTEX® SL-350QFR-BT Active IR Outdoor Barrier [SL-350QFR-BT]
    OPTEX® SL-350QFR-BT Active IR Outdoor Barrier
    Ref.: SL-350QFR-BT
    4 Beams wireless AIR barrier. Range: 100m. Works with 3.6 V 13.0 Ah LSH20 modele from SAFT lithium battery (2 or 4 for each transmitter/receiver)(Battery not included) .
    V.A.T. included
    Consult
    OPTEX® SL-350QN(C) Active IR Outdoor Barrier [SL-350QN(C)]
    OPTEX® SL-350QN(C) Active IR Outdoor Barrier
    Ref.: SL-350QN(C)
    4 Beams Active IR barrier. Range: 100m. Basic version. Allows column, pole or wallmounting. Ideal when there is not beams overlapping problems with others barriers. 2x magnification viewer and dials for horizontal or vertical alignation (Not necessary to use a screwdriver). Bright colours interior to facilitate optic alignment. Tamper (In transmitter as in the receiver). Anti-freeze/frost design. IP65.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved