English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 1444
    UTC™ Zone expansion modules Gen2 [TX-9001-03-1]
    UTC™ Zone expansion modules Gen2
    Ref.: TX-9001-03-1
    Relay via radio 868Mhz Gen2. Allows expand the signal distance for any 868Mhz Gen2 device. With sabotage tamper. Doble antenna for better transmission quality . Supervision from the central. Have diagnostic tools. Power source: 12VDC
    V.A.T. included
    Consult
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2 [RF-EV1012PI-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2
    Ref.: RF-EV1012PI-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    108.30 €
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ - G2 [RF-EV1012-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (12m) Compatible Advanced™ y ZeroWire™ - G2
    Ref.: RF-EV1012-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    108.30 €
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2 [RF-EV1016-K4]
    Volumétrico UTC™ PIR LoNa® Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ + Anti-Mascotas - G2
    Ref.: RF-EV1016-K4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 16m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    134.30 €
    Volumétrico UTC™ PIR Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ - G2 [RF4016I4]
    Volumétrico UTC™ PIR Vía Radio 433MHz (16m) Compatible Advanced™ y ZeroWire™ - G2
    Ref.: RF4016I4
    Passive volumetric 86º via radio detector with Learn Mode technology. Supervised every 17 minutes. Mirror optics. 9 curtains of 12m. Installation height: 1.8 to 3m. Immune to false alarms. Frequency 433Mhz (63 bit). Outdoor range: 400m. Working temperature: -18ºC to 55ºC. Power supply with a high capacity 3.6Vdc lithium battery of 5 years. Dimensions: 103x71x51mm. Grade 2.
    V.A.T. included
    120.88 €
    VRS121000EBS Power Supply for UTC™ IFS® Equipment [VRS121000EBS]
    VRS121000EBS Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EBS
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VRS121000EES Power Supply for UTC™ IFS® Equipment [VRS121000EES]
    VRS121000EES Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EES
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VRS122000EBA Power Supply for UTC™ IFS® Equipment [VRS122000EBA]
    VRS122000EBA Power Supply for UTC™ IFS® Equipment
    Ref.: VRS122000EBA
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    52.60 €
    Wall Bracket for 180º Column [PB50-WB]
    Wall Bracket for 180º Column
    Ref.: PB50-WB
    Wall mount bracket for 180º barriers.
    V.A.T. included
    79.52 €
    Wireless 433-868 MHz Converter for UTC™ LoNa™ (10 Pcs. Pack) [RF-9201-07-1-KIT-10P]
    Wireless 433-868 MHz Converter for UTC™ LoNa™ (10 Pcs. Pack)
    Ref.: RF-9201-07-1-KIT-10P
    433 MHz 63bit or 433 MHz LoNa support selectable. Compact size and modern design. No external antennas. Visualization of sensor RSSI, Noise Floor Level, Battery level. Board only.
    V.A.T. included
    2,932.73 €
    Wireless 433-868 MHz Converter for UTC™ LoNa™ [RF-9201-07-1]
    Wireless 433-868 MHz Converter for UTC™ LoNa™
    Ref.: RF-9201-07-1
    433 MHz 63bit or 433 MHz LoNa support selectable. Compact size and modern design. No external antennas. Visualization of sensor RSSI, Noise Floor Level, Battery level. Board only.
    V.A.T. included
    268.89 €
    Wireless Multi-stimulus Tester Kit for Smoke and Heat Sensors (6m) [TS816]
    Wireless Multi-stimulus Tester Kit for Smoke and Heat Sensors (6m)
    Ref.: TS816
    Kit composed by an universal smoke and temperature tester expandable up to 6 meters. Includes bag and batteries. Individual and simultaneous test with diferents stimuli. Compatible with multi-sensor detectors. Smoke and heat in a single device. The smoke capsule saves time and money- without pressurized aerosol. Easy to use.
    V.A.T. included
    3,866.87 €
    Wireless Multi-stimulus Tester Kit for Smoke and Heat Sensors [TM010]
    Wireless Multi-stimulus Tester Kit for Smoke and Heat Sensors
    Ref.: TM010
    The TM010 is a multi-simulator tester for smoke and heat detectors all in a single unit. This unit offers the possibility to test only with heat, only with smoke or both at the same time, its required to test multi-sensor detectos. Necessary telescopic element ET010 or ET011. Includes batteries.
    V.A.T. included
    3,166.85 €
    Wireless Multi-stimulus Tester Kit for Smoke, Heat and CO Sensors (6m) [TS826]
    Wireless Multi-stimulus Tester Kit for Smoke, Heat and CO Sensors (6m)
    Ref.: TS826
    Kit composed by an universal smoke, temperature and monoxide tester expandable up to 6 meters, Includes bag and batteries. Individual or simultaneous test with diferents factors. Compatible with multisensor detectors. Smoke, heat and CO in a single device. The smoke capsule saves time and money- without pressurized aerosol. Easy to use.
    V.A.T. included
    4,319.40 €
    XPR® DINFP2H Dual Trim Frame - Silver - Horizontal [ACL800FL-2FH-S]
    XPR® DINFP2H Dual Trim Frame - Silver - Horizontal
    Ref.: ACL800FL-2FH-S
    Double trim frame for horizontal mounting for ACL8xxFL series recessed proximity readers. Dimensions: 80x160x9mm. Built in ABS.
    V.A.T. included
    Consult
    XPR® DINRTT Surface Push Button - Charcoal Gray [ACL870SU-PB-G]
    XPR® DINRTT Surface Push Button - Charcoal Gray
    Ref.: ACL870SU-PB-G
    The CL800-PB series is a surface mount push button requesting an output request, operates independently or can also be connected through a controller to provide output from a secure area (push button input). It includes buzzer and a double status LED. It can work in pulse mode of 3, 5, 10 sec or lock. It can be used with all standalone ACL87xsu / FL-Bx biometric readers. Dimensions: 92x51x27mm. Power 9 to 14 VDC.
    V.A.T. included
    Consult
    XPR® DINRTT Surface Push Button - Silver [ACL870SU-PB-S]
    XPR® DINRTT Surface Push Button - Silver
    Ref.: ACL870SU-PB-S
    The CL800-PB series is a surface mount push button requesting an output request, operates independently or can also be connected through a controller to provide output from a secure area (push button input). It includes buzzer and a double status LED. It can work in pulse mode of 3, 5, 10 sec or lock. It can be used with all standalone ACL87xsu / FL-Bx biometric readers. Dimensions: 92x51x27mm. Power 9 to 14 VDC.
    V.A.T. included
    Consult
    XPR® MTPX-MF 13.56 MHz Aluminum Reader (Silver) [ACL800SUW-RDMF-S]
    XPR® MTPX-MF 13.56 MHz Aluminum Reader (Silver)
    Ref.: ACL800SUW-RDMF-S
    Aluminum card reader for surface mounting 13.65 MHz Smart Card proximity. Three color LED. Warning buzzer: status indication, alarm and tamper. Outdoor installation: IP65. Compatible with reading technologies MIFARE® Classic, MIFARE® Ultralight, MIFARE® DESFire with reading distance of 1 to 3 cm. Wiegand output protocols 26, 34, 58 bits. Power supply between 9 - 14 V DC, maximum consumption 110mA, Working temperature: -20ºC to + 50ºC. Dimensions 92 x 51 x 25 mm. Maximum wiring distance between reader and controller up to 150 meters. Silver color.
    V.A.T. included
    Consult
    XPR® MTPX-MF 13.56 MHz Recessed Reader - Without Cover [ACL800FLW-RDMF]
    XPR® MTPX-MF 13.56 MHz Recessed Reader - Without Cover
    Ref.: ACL800FLW-RDMF
    Card reader in ABS for mounting on the embedded Smart Card 13.65 MHz. Led tricolor. Warning buzzer: status, alarm and tamper indication. IP40. Compatible with MIFARE® Classic reading technologies, MIFARE® Ultralight, MIFARE® DESFire with reading distance of 6 cm. Wiegand output protocols 226, 34, 58 bits. Power supply between 9 - 14 V DC, maximum consumption 150mA, Working temperature: -20ºC to + 50ºC. Dimensions 92 x 51 x 25 mm. Maximum distance of the wiring between the reader and the controller up to 150 meters.
    V.A.T. included
    Consult
    XPR® Wiegand Keypad (Silver) [ACL805SUW-S]
    XPR® Wiegand Keypad (Silver)
    Ref.: ACL805SUW-S
    Surface mount aluminum keypad for TruPortal™ compatible with Wiegand protocol 26, 30, 34, 40, 42, 58 bit, with backlit metal keypad, status LEDs, buzzer, tamper protection, power consumption 70mA, power supply 9-14V DC, IP65, temperature range -20ºC to + 50ºC. Dimensions 92 x 51 x 25 mm. Silver color.
    V.A.T. included
    Consult
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 110) [FE110ZL]
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 110)
    Ref.: FE110ZL
    Mounting bracket in Z and L for Series 110. Support dimensions in Z: 165 x 38 x 38 mm. Support dimensions in L: 165 x 42 x 30 mm.
    V.A.T. included
    Consult
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 130) [FE130ZL]
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 130)
    Ref.: FE130ZL
    Mounting bracket in Z and L for Series 130.
    V.A.T. included
    Consult
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 160) [FE160ZL]
    Z + L Bracket Set for UTC™ Interlogix® Maglocks (Series 160)
    Ref.: FE160ZL
    Mounting bracket in Z and L for Series 160.
    V.A.T. included
    Consult
    Z Bracket for UTC™ Interlogix® Maglocks (Series 160) [FE160Z]
    Z Bracket for UTC™ Interlogix® Maglocks (Series 160)
    Ref.: FE160Z
    Z-mount bracket for Series 160.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved