English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 802
    Plinth 100mm for floor standing cabinets 800x1000mm [RAC1810]
    Plinth 100mm for floor standing cabinets 800x1000mm
    Ref.: RAC1810
    100mm plinth is intended for 800x800mm floor standing cabinets. It enables stabilising cabinet and fixing it to floor. Dimensions: 796 x 100 x 796 [+/-2 mm]. Material: cold-rolled steel SPCC, 1.2mm, 2mm, RAL9004 (black), metallic.
    V.A.T. included
    72.60 €
    Plinth 100mm for Floor Standing Cabinets 800x800mm [RAC188M]
    Plinth 100mm for Floor Standing Cabinets 800x800mm
    Ref.: RAC188M
    100mm plinth is intended for 800x800mm floor standing cabinets. It enables stabilising cabinet and fixing it to floor. Dimensions: 796 x 100 x 796 [+/-2 mm]. Material: cold-rolled steel SPCC, 1.2mm, 2mm, RAL9004 (black), metallic.
    V.A.T. included
    Consult
    Plinth 100mm for Floor Standing Cabinets 800x800mm [RAC188]
    Plinth 100mm for Floor Standing Cabinets 800x800mm
    Ref.: RAC188
    100mm plinth is intended for 600x1000mm floor standing cabinets. It enables stabilising cabinet and fixing it to floor. Dimensions: 596 x 100 x 996 [+/-2 mm]. Material: cold-rolled steel SPCC, 1.2mm, 2mm, RAL9004 (black), metallic.
    V.A.T. included
    68.97 €
    Power Adapter for HIKVISION DVR (DIN 4 Pin/ 2.1/5.5 Socket) [ML517]
    Power Adapter for HIKVISION DVR (DIN 4 Pin/ 2.1/5.5 Socket)
    Ref.: ML517
    The power adapter allows you to connect a PSU equipped with 2.1/5.5 socket to the HIKVISION DVR equipped with four pin power supply. Operation voltage: 30VDC. Current max.: 5,0A. Plug – socket: JACK 2,1/5,5 (male). Plug – plug: DIN4 (male). Wire Run Length: 10 cm
    V.A.T. included
    2.44 €
    Power cord 230VAC 3x0,5 mm² (2 m) [PSD17]
    Power cord 230VAC 3x0,5 mm² (2 m)
    Ref.: PSD17
    Power cord 230VAC 3x0,5 mm², 2 m, IEC C14, CEE 7F Schuko. 3-wire power cord is designed to connect the RAW1/ RAW2 fans to the RAT-1R digital thermostat
    V.A.T. included
    Consult
    Power Distribution Unit - 8 Outlets Type F [RALZ/F]
    Power Distribution Unit - 8 Outlets Type F
    Ref.: RALZ/F
    W=19", H=1U, socket type: F (Schuko); plug type: E/F (Unischuko). Number of outlets: 8.
    V.A.T. included
    55.90 €
    Power Distribution Unit - 8 Outlets [RALZ]
    Power Distribution Unit - 8 Outlets
    Ref.: RALZ
    W=19", H=1U, socket type: E; plug type: E/F (Unischuko). Number of outlets: 8.
    V.A.T. included
    55.90 €
    Power Distribution Unit 230VAC - 8 Outlets/Type C13 [RALZ/C13]
    Power Distribution Unit 230VAC - 8 Outlets/Type C13
    Ref.: RALZ/C13
    W=19", H=1U, socket type: C13; plug type: E/F (Unischuko). Number of outlets: 8.
    V.A.T. included
    Consult
    PU-1 Relay Module [AWZ510]
    PU-1 Relay Module
    Ref.: AWZ510
    The PU1 relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It features a serial fuse in the circuit of the relay (C, NO, NC). Power supply: 10÷16VDC/10÷13VAC. Relays: 1x REL-C/NO/NC, 1A@30VDC/50VAC. Protections: fuse 1.5Amp.
    V.A.T. included
    13.47 €
    PU-1/HV Relay Module [AWZ514]
    PU-1/HV Relay Module
    Ref.: AWZ514
    The PU1/HV (AWZ514) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷16VDC/VAC. Relays: 1x REL-C/NO/NC, 6A@30VDC/250VAC. Protections: fuse 6.3Amp.
    V.A.T. included
    18.04 €
    PU-1/HV/24V Relay Module [AWZ517]
    PU-1/HV/24V Relay Module
    Ref.: AWZ517
    The PU1/HV/24V (AWZ517) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 20÷32VDC/VAC. Relays: 1x REL-C/NO/NC, 6A@30VDC/250VAC. Protections: fuse 6.3Amp.
    V.A.T. included
    22.11 €
    PU-2 Relay Module [AWZ512]
    PU-2 Relay Module
    Ref.: AWZ512
    The PU2 (AWZ512) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷16VDC/VAC. Relays: 2x REL-C/NO/NC, 1A@30VDC/50VAC. Protections: fuse 1.5Amp.
    V.A.T. included
    18.04 €
    PU-2/HV Relay Module [AWZ625]
    PU-2/HV Relay Module
    Ref.: AWZ625
    The PU2/HV (AWZ 625) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷16VDC/VAC. Relays: 2x REL-C/NO/NC, 6A@30VDC/250VAC. Protections: fuse 6.3Amp.
    V.A.T. included
    48.53 €
    PU-3 Relay Module [AWZ528]
    PU-3 Relay Module
    Ref.: AWZ528
    The PU3 (AWZ528) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. The module is adapted for connection of cables with a maximum cross section of 1mm2. Power supply: 10÷14VDC. Relays: 3x REL-C/NO/NC, 1A@30VDC/50VAC.
    V.A.T. included
    34.30 €
    PU-4/HV Relay Module [AWZ626]
    PU-4/HV Relay Module
    Ref.: AWZ626
    The PU4/HV (AWZ 626) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷16VDC/VAC. Relays: 4x REL-C/NO/NC, 6A@30VDC/250VAC. Protections: fuse 6.3Amp.
    V.A.T. included
    61.24 €
    PULSAR® 1-Port (Out) PoE Extender - Hermetic Enclosure [EXT-POE1H]
    PULSAR® 1-Port (Out) PoE Extender - Hermetic Enclosure
    Ref.: EXT-POE1H
    Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port. Protections: OLP, SCP. Operating temperature: -25°C÷50°C. Dimensions: W=158 H=118 D=77 [+/- 2mm]. The number of cable glands/cable diameter: 4pcs. / 4÷8mm. Hermetic enclosure IP56, surface mounted enclosure, locking – bolted. Pole mounting option (requires the OZB1 adapter - optional accessory). Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    Consult
    PULSAR® 1-Port (Out) PoE Extender [EXT-POE1]
    PULSAR® 1-Port (Out) PoE Extender
    Ref.: EXT-POE1
    Increases Ethernet range by 100 meters. PoE input: PoE IN - compliant with IEEE802.3af/at. PoE output: PoE OUT - compliant with IEEE802.3af. Output current PoE OUT: 0.3Amp/port. Protections: OLP, SCP. Dimensions: L=81 W=77 H=26 [+/- 2mm]. Designed for 10Mbit/s and 100Mbit/s network.
    V.A.T. included
    Consult
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU in Metal Enclosure with Two Sections [PSDCS161214]
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU in Metal Enclosure with Two Sections
    Ref.: PSDCS161214
    Power supply for 12VDC cameras , two-section. Size: 300 x 301 x 52+8 mm. Uin=176÷264VAC, Uout=12÷15VDC. 2 x adjustment, 16x0.87A, 14A. SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    Consult
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU with DVR Space in Metal Enclosure [PSDCR161214]
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU with DVR Space in Metal Enclosure
    Ref.: PSDCR161214
    Power supply for 12VDC cameras with recorder space. Size: 430 x 605 x 100+14 mm. Uin=176÷264VAC, Uout=12÷15VDC. 1 x adjustment. 16x0.87A, 14A. Recorder space max.: 400 x 100 x 345, SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    515.82 €
    PULSAR® 12V / 3.0Amp Power Supply [PSA12030]
    PULSAR® 12V / 3.0Amp Power Supply
    Ref.: PSA12030
    Switching power supply for PSA series CCTV - adapter (plug) - Uin = 100-240VAC 50 / 60Hz, Uout = 12VDC. Size: 90 x 94 x 36 [+/- 2 mm]. Output: 3Amp. DC power conductor: 1.45m + JACK 5.5 / 2.1 female. Protections: SCP, OLP.
    V.A.T. included
    30.49 €
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU in Metal Enclosure with Two Sections [PSDCS08128]
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU in Metal Enclosure with Two Sections
    Ref.: PSDCS08128
    Power supply for 12VDC cameras , two-section. Size: 300 x 301 x 52+8 mm. Uin=176÷264VAC, Uout=12÷15VDC. 2 x adjustment, 8x1A, 8A. SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    Consult
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU with Space for DVR in Metal Enclosure [PSDCR08128]
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU with Space for DVR in Metal Enclosure
    Ref.: PSDCR08128
    Power supply for 12VDC cameras with recorder space. Size: 430 x 605 x 100+14 mm. Uin=176÷264VAC, Uout=12÷15VDC. 1 x adjustment. 8x1A, 8A, recorder space max.: 400 x 100 x 345 mm. SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    426.89 €
    PULSAR® 12V/0.5A Power Supply Adapter [PSA12005]
    PULSAR® 12V/0.5A Power Supply Adapter
    Ref.: PSA12005
    Switch-mode power supply for CCTV PSA series - adapter (plug) - Uin=100-240VAC 50/60Hz, Uout=12VDC. Size: 39 x 59 x 65 mm. IMAX=0.5A, I=0.35A. SCP (short circuit protection), OLP (overload protection), LED (operation status indication) x 1.
    V.A.T. included
    13.47 €
    PULSAR® 12V/1.2Amp Switch-Mode Power Supply Adapter [PSR12012]
    PULSAR® 12V/1.2Amp Switch-Mode Power Supply Adapter
    Ref.: PSR12012
    Switch-mode power supply for CCTV - desktop (cable-cable) - 12÷15VDC. Uin=90-264VAC 50Hz, Uout=12-15VDC. Size: 78 x 48 x 35(41.5) mm. IMAX=1.2A, I=0.84A, SCP (short circuit protection), OLP (overload protection), LED (operation status indication) x 1.
    V.A.T. included
    25.41 €
    SYSAWAY© 2024 All rights reserved