English
Español
  • Search
    • +34 902930427

    0.00 €

    Access Control

    Products 4459
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    TDSI® MICROgarde® II PCB Assembly [4165-2502]
    TDSI® MICROgarde® II PCB Assembly
    Ref.: 4165-2502
    Door Control Panel Spare PCB Assembly. MICROgarde® II supports 2 doors ­ 4 readers. May be used with TDSi® or other third party readers for new or retrofit applications. Easy to install, commission and operate - 2-wire RS-485 communication, and diagnostic LEDs. System integration enabled through optional I/O and TCP/IP modules. Fully flexible and scalable solution. Custom reporting and automated back up. Range of features including variable lock times, local anti pass back and automatic fire door release. PCBs are supplied as spares only. UID of original PCB is required upon order.
    V.A.T. included
    786.50 €
    TDSI® EXkeypad® [5002-2070]
    TDSI® EXkeypad®
    Ref.: 5002-2070
    Local Programming Keypad for EXpert® Master Door Control Panels. Plug-in programmer. Provides a keypad and display and full access to the EXpert® programming features. No need for a host PC. Navigate easily around the menu. Alpha-numeric display and 16 button keypad.
    V.A.T. included
    670.04 €
    TDSI® EXOUT Board [5002-3062]
    TDSI® EXOUT Board
    Ref.: 5002-3062
    32 Dry Contact Relay Outputs for use with Expert® Door Control Panels
    V.A.T. included
    1,265.96 €
    TDSI® EXIN/OUT Board [5002-3060]
    TDSI® EXIN/OUT Board
    Ref.: 5002-3060
    32 Supervised Inputs and 16 Dry Contact Relay Outputs (for use with EXpert® ACU). Provides an additional 32 supervised inputs and 16 relay outputs. Interface to any lift system. Delivers great flexibility and scalability. All inputs are supervised. Monitor fire doors, movement detection etc to ensure system security.
    V.A.T. included
    2,167.41 €
    TDSI® MICROgarde® TCP/IP Module [5002-1812]
    TDSI® MICROgarde® TCP/IP Module
    Ref.: 5002-1812
    Connect MICROgarde® Door Control Panel to a LAN or WAN. The MICROgarde® TCP/IP module can be connected to 100Mb or 10Mb networks. In order to fully satisfy EU requirements for EMC and RFI, this product must only be connected to a 10Mb network port. On a 100Mb network, we recommend connection via a hub that is limited to 10Mb.
    V.A.T. included
    488.54 €
    TDSI® MICROgarde® Input Output Module [5002-1811]
    TDSI® MICROgarde® Input Output Module
    Ref.: 5002-1811
    Provides 4 Supervised Inputs and 2 Dry Contact Relay Outputs. You can add an I/O module to the PSU and non-PSU versions of MICROgarde®. For PSU version: the input/output module comes with 3 self-tapping screws and 3 spacers for the metal cased MICROgarde®. Fit these 3 screws through the I/O board and then screw on the plastic spacers provided, before fitting and screwing to the chassis. For non PSU version: the I/O module has a white plastic cover but a metal chassis that has metal spacers already welded in position for the I/O board. Use the 3 x standard M3 screws that are provided.
    V.A.T. included
    279.81 €
    CDVI® IEVO-ANC-AR Universal Relay [F0109000043]
    CDVI® IEVO-ANC-AR Universal Relay
    Ref.: F0109000043
    Connect this relay module when you want to use the ievo system in stand-alone operation (ie not integrated with other access control systems). The relay outputs will be activated based on the Wiegand output of the controller where the access granted event has been generated.
    V.A.T. included
    182.71 €
    CEBEK® 24VDC Delay Timer Relay Module [I-1.24]
    CEBEK® 24VDC Delay Timer Relay Module
    Ref.: I-1.24
    24Vdc powered 0.1 second to 4 minute delay timer module with mains rated relay output. Delay is user adjustable using two time scales. When activated the relay turns on for the user-set time period. Timer is activated by the Start input (using for example a push button or relay contact closure). The timing cycle is non-retriggerable and will be completed regardless of further Start inputs or if the Start input remains closed after activation. A new timing cycle can only commence once the current timing cycle has finished.
    V.A.T. included
    Consult
    FERMAX® DIN Rail Relay 12VDC 12Amp [3491]
    FERMAX® DIN Rail Relay 12VDC 12Amp
    Ref.: 3491
    Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be installed in DIN rail. They have adhesive strips for fixing, or they can be screwed directly to the wall.
    V.A.T. included
    Consult
    FERMAX® Relay for Additional Functions [2013]
    FERMAX® Relay for Additional Functions
    Ref.: 2013
    Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.
    V.A.T. included
    51.57 €
    PC-4 Timer Relay Module [AWZ526]
    PC-4 Timer Relay Module
    Ref.: AWZ526
    The PC4 time module is a transceiver that allows Activation of the relay for the T2 time after the T1 trigger time. The T1 and T2 times can be adjusted in the range from 1 second to 5 minutes. The relay can be used in door opening circuits, locks, gate closing systems, alarm systems, Intrusion Detection Systems, Access control systems and many others. Application: Activation of the relay for the T2 time after the T1 trigger time. Power supply: 10÷14VDC. The control inputs: S+, S-, R-. Relay output -C/NO/NC, 1A@30VDC/50VAC. Time range: 1s÷5min. Optical indication.
    V.A.T. included
    36.59 €
    PC-3 Timer Relay Module [AWZ525]
    PC-3 Timer Relay Module
    Ref.: AWZ525
    The PC3 time module is a transceiver that allows extending the trigger pulse for a short period of time set by the potentiometer. The device can operate in two modes: extension of time activated by the pulse or by the triggering signal loss. The range of the measured times is between 1s. - 5 minutes. Application: extension of the trigger pulse for the set time. Power supply: 10÷14VDC. The control inputs: S+, S-. Relay output -C/NO/NC, 1A@30VDC/50VAC. Time range: 1s÷5min. Optical indication.
    V.A.T. included
    35.32 €
    PC-2 Timer Relay Module [AWZ518]
    PC-2 Timer Relay Module
    Ref.: AWZ518
    The PC2 timing relay module is intended for AC power status control in object alarm systems (monitoring transmitters, alarm control panels, DC power supply units, etc.). The module informs about AC power loss with a preset delay time and its returne. PC2 has two OC outputs (OC1, OC2) and an LED (L1) indicating the devices status. Delay time indicating AC power loss is adjustable via two jumpers – Z1, Z2. Application: AC power status control : 0÷30V. Power supply: 10÷15VDC. Input: AC1. Output: 2 x OC type - max. 50mA. Time range: 4s / 1min / 16min / 4h15min. Optical indication.
    V.A.T. included
    35.32 €
    PC-1 Timer Relay Module [AWZ516]
    PC-1 Timer Relay Module
    Ref.: AWZ516
    The PC1 time module is a transceiver allowing execution of time-logic programs. The device is characterized by versatility, high accuracy of the measured time based on the crystal oscillator and the possibility of its precise and repeatable adjustment. The relay can be used to extend short control impulses, e.g. controlling the operation locks, electromagnetic jumpers, bistable control, etc. The relay is used in automation and control circuits and access control projects, with logical dependencies on the state of: the controller, door opening sensor (reed switch), exit button, etc... Application: multi-function time relay 18 different time-logic functions. Power supply: 10÷16VDC. The control inputs: S+, S-, R-. Output: Relay -C/NO/NC, 10A@30VDC/250VAC. Time range: 0,1s÷100h. Optical indication + LED display.
    V.A.T. included
    62.00 €
    P-1 Relay Module [AWZ622]
    P-1 Relay Module
    Ref.: AWZ622
    The P1 (AWZ622) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷14VDC. Relays: 1x REL-C/NO/NC, 1A@30VDC/50VAC. Dimensions: W=30, H=27, D=18.
    V.A.T. included
    5.59 €
    MP-1E Relay Module [AWZ612]
    MP-1E Relay Module
    Ref.: AWZ612
    The (AWZ612) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷14VDC. Relays: 1x REL-C/NO/NC, 1A@30VDC/50VAC.
    V.A.T. included
    17.53 €
    MP-5 Relay Module [AWZ520]
    MP-5 Relay Module
    Ref.: AWZ520
    The MP5 (AWZ520) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷14VDC. Relays: 5x REL-C/NO/NC, 2A@30VDC/50VAC.
    V.A.T. included
    45.74 €
    PU-3 Relay Module [AWZ528]
    PU-3 Relay Module
    Ref.: AWZ528
    The PU3 (AWZ528) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. The module is adapted for connection of cables with a maximum cross section of 1mm2. Power supply: 10÷14VDC. Relays: 3x REL-C/NO/NC, 1A@30VDC/50VAC.
    V.A.T. included
    34.30 €
    MP-2/24V Relay Module [AWZ624]
    MP-2/24V Relay Module
    Ref.: AWZ624
    The MP-2/24V (AWZ624) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 20÷28VDC. Relays: 2x REL-C/NO/NC, 2A@30VDC/50VAC.
    V.A.T. included
    24.90 €
    MP-2 Relay Module [AWZ529]
    MP-2 Relay Module
    Ref.: AWZ529
    The MP2 (AWZ529) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. Power supply: 10÷14VDC. Relays: 2x REL-C/NO/NC, 2A@30VDC/50VAC.
    V.A.T. included
    16.77 €
    PK-4 Relay Module [AWZ515]
    PK-4 Relay Module
    Ref.: AWZ515
    The PK4 (AWZ515) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It features a serial fuse in the circuit of the relay (BELL+, SYGNAL+). Power supply: 10÷14VDC. Relays: 4x REL-C/NO/NC, 2A@30VDC/50VAC. Protections: fuses 2A, 0.5Amp.
    V.A.T. included
    45.74 €
    MP-1 Relay Module [AWZ610]
    MP-1 Relay Module
    Ref.: AWZ610
    The MP1 (AWZ610) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It is equipped with two separate T+, T- inputs used to trip relays with high or low condition. Power supply: 10÷14VDC. The control inputs: T-, T+. Relays: 1x REL C/NO/NC, 2A@30VDC/50VAC. Optical indication.
    V.A.T. included
    23.89 €
    PK-2 Relay Module [AWZ508]
    PK-2 Relay Module
    Ref.: AWZ508
    The PK2 (AWZ508) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It is equipped with two separate T+, T- inputs used to trip relays with high or low condition. Power supply: 12VDC/24VDC. The control inputs: T-, T+. Relays: 2x REL C/NO/NC, 2A@30VDC/50VAC. Optical indication.
    V.A.T. included
    29.48 €
    PK-1 Relay Module [AWZ513]
    PK-1 Relay Module
    Ref.: AWZ513
    The PK1 (AWZ513) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module. It features a serial fuse in the circuit of the relay (C, NO, NC). Power supply: 10÷14VDC. Relays: 1x REL-2x C/NO/NC, 2A@30VDC/50VAC. Protections: fuses 2A, 0.5Amp.
    V.A.T. included
    22.11 €
    SYSAWAY© 2024 All rights reserved