English
Español
  • Search
    • +34 902930427

    0.00 €

    Embedded Modules

    Products 50
    SUPREMA® Airfob Module [AP-M]
    SUPREMA® Airfob Module
    Ref.: AP-M
    BLE to RFID signal converter module. It converts RFID readers into Suprema Mobile Access compatible terminals and facilitates mobile access for users. Compatible with Mifare readers. Translator from BLE (Bluetooth) to Radio Frequency (RF). It does not need a battery or cables for its operation. Easy to apply anywhere an RFID card is used. Reduces the cost associated with issuing physical cards. High level of security compared to other systems. Manage mobile credentials through Suprema Airfob Portal.
    V.A.T. included
    Consult
    NEDAP® OSDP Interface [9229078]
    NEDAP® OSDP Interface
    Ref.: 9229078
    Interface board for integration of the TRANSIT reader to an OSDP secure channel protocol (v2.1.7 version) communication network.
    V.A.T. included
    Consult
    NEDAP® MACE™ Configuration Kit [9566503]
    NEDAP® MACE™ Configuration Kit
    Ref.: 9566503
    The configuration kit includes an RS485-USB converter and a 24V power adapter with international socket plugs. Both parts have been connected to an extra pair of connectors that match the pin-headers on the MACE Smart reader.
    V.A.T. included
    Consult
    NEDAP® RS422/RS485 Interface Board [7817347]
    NEDAP® RS422/RS485 Interface Board
    Ref.: 7817347
    Optional interface board for integration of the TRANSIT™ readers to a RS422 or RS485 communication network.
    V.A.T. included
    Consult
    NEDAP® RS485 Accessories [8500681]
    NEDAP® RS485 Accessories
    Ref.: 8500681
    RS485 communication connector set for uPASS™ Target. Includes T-junction and termination resistor.
    V.A.T. included
    Consult
    NEDAP® TCC270 Converter [9564233]
    NEDAP® TCC270 Converter
    Ref.: 9564233
    Convertor with RF input and a variety of outputs based on special firmware versions available for TRANSIT™ and TRANSIT™ Entry. Connects uPASS™ Access to existing TRANSIT™ installations.
    V.A.T. included
    Consult
    NEDAP® MACE™ OSDP Converter [9565817]
    NEDAP® MACE™ OSDP Converter
    Ref.: 9565817
    Developed to update NEDAP® readers (with RF output) with OSDP. The OSDP protocol is implemented in accordance with the SIA OSDP standard v2.1.6 that includes the secure channel protocol. The NEDAP® compatible readers are: TRANSIT™ Ultimate, TRANSIT™ Standard, TRANSIT™ Entry, uPASS™ Target, uPASS™ Reach, uPASS™ Access, MACE™ Reader MM and MACE™ Reader MM QR.
    V.A.T. included
    Consult
    Profibus Interface Board [7817134]
    Profibus Interface Board
    Ref.: 7817134
    TCP/IP board for TRANSIT ™ readers over PROFIBUS networks.
    V.A.T. included
    Consult
    TCP / IP Interface Board [7817940]
    TCP / IP Interface Board
    Ref.: 7817940
    TCP/IP board for ENTRY™ and TRANSIT ™ readers over ETHERNET™ networks.
    V.A.T. included
    Consult
    HID® Interface Board [7819102]
    HID® Interface Board
    Ref.: 7819102
    The HID® Interface Board enables decoding of HID® Prox™ cards by the TRANSIT™ ENTRY™ reader in case of Booster ™ applications used in combination HID® Prox™ cards.
    V.A.T. included
    Consult
    NEDAP® MTR [7816650]
    NEDAP® MTR
    Ref.: 7816650
    The Multi Technology Reader (MTR) module, for installation with ENTRY ™ readers, allowing to read LF 125 KHz and 13.56 MHz HF credentials based on HID® EM®, MIFARE® and LEGIC®.
    V.A.T. included
    Consult
    GEOVISION™ GV-AS Ethernet Converter Module [50-ENETM-A20]
    GEOVISION™ GV-AS Ethernet Converter Module
    Ref.: 50-ENETM-A20
    Ethernet module for GEOVISION control units.
    V.A.T. included
    Consult
    GEOVISION™ GV-FWC Face-Wiegand Converter Module [84-FWC0000-0010]
    GEOVISION™ GV-FWC Face-Wiegand Converter Module
    Ref.: 84-FWC0000-0010
    GV-FWC can integrate GV-Face Recognition Cameras into access control systems by sending access card data, paired to Face IDs, to controllers either through TCP/IP or Wiegand connection. When connected via TCP/IP, a face image is transmitted along with the access data upon face recognition.
    V.A.T. included
    Consult
    GEOVISION™ GV-WTR Converter Module [84-GVWTR00-0100]
    GEOVISION™ GV-WTR Converter Module
    Ref.: 84-GVWTR00-0100
    GV-WTR is a converter designed for enabling the integration of a 3rd-party Wiegand or GV-RS-485 interface reader to a GV-RS-485 or Wiegand controller, respectively. Through the GV-WTR, both Wiegand / GV-RS-485-interface readers can be easily combined to a wide range of access control systems for improved versatility.
    V.A.T. included
    Consult
    FERMAX® MDS/AC+ Remote Management Terminal [1087]
    FERMAX® MDS/AC+ Remote Management Terminal
    Ref.: 1087
    The Remote Management IP Terminal allows the connection between the PC and the installation through the ethernet network and the Internet, thus being able to remotely configure, control and manage the installations, avoiding additional wiring. The Remote Management Terminal is in charge of converting the TCP / IP packets into serial data, so that the installation is able to interpret them in the same way as if it were connected directly to the PC.
    V.A.T. included
    761.86 €
    FERMAX® USB to RS-485 Converter [24661]
    FERMAX® USB to RS-485 Converter
    Ref.: 24661
    Interface that allows the local connection between the PC (USB port) and the installation, thus being able to configure, control and manage the installations. Used for maintenance of installations that do not have the PC permanently connected, as an installer tool. PC connection: USB (USB cable included). Installation connection: RS-485 via molex or twisted pair connector (max 1000 meters).
    V.A.T. included
    200.05 €
    FERMAX® PC Adapter from RS-232 to RS-485 [2338]
    FERMAX® PC Adapter from RS-232 to RS-485
    Ref.: 2338
    Interface that allows the local connection between the PC (serial port) and the installation, thus being able to configure, control and manage the installations. Used for management and maintenance of facilities that have the PC permanently connected. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. PC connection: Serial port (RS-232), max 30 meters (including 3 meter cable). Installation connection: RS-485 (twisted pair), max 1000 meters.
    V.A.T. included
    356.97 €
    XPR® CNV1000 TCP / IP-RS485 Converter (DIN Rail) [ACL800FL-CONV-W]
    XPR® CNV1000 TCP / IP-RS485 Converter (DIN Rail)
    Ref.: ACL800FL-CONV-W
    RS485 to TCP / IP converter for a network of biometric readers of up to a maximum of 31 devices. DIN rail installation. It requires configuration software model BioManager, which can discover all the readers of the network automatically. Dimensions: 90x37x33mm. Power supply: 12 Vdc. Consumption: 100 mA
    V.A.T. included
    Consult
    CDVI® RSIP TCP/IP Converter for CENTAUR™ Controllers [F0111000210]
    CDVI® RSIP TCP/IP Converter for CENTAUR™ Controllers
    Ref.: F0111000210
    BioMini incorporates high quality optical sensor that can capture fingerprints at resolution of 500dpi. The sensor also features IP65 protection on its surface for protection against dust and water to ensure high performance.
    V.A.T. included
    348.48 €
    RFIdeas® Wiegand-USB Converter [OEM-W2USB-V3]
    RFIdeas® Wiegand-USB Converter
    Ref.: OEM-W2USB-V3
    The converter output is sent to the USB port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.
    V.A.T. included
    475.57 €
    RFIdeas® Wiegand-USB Converter - Long Formats [OEM-W2USB-CHUID]
    RFIdeas® Wiegand-USB Converter - Long Formats
    Ref.: OEM-W2USB-CHUID
    The converter output is sent to the USB port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.
    V.A.T. included
    475.57 €
    RFIdeas® Wiegand-RS485 Serial Converter [OEM-W2RS485-V3]
    RFIdeas® Wiegand-RS485 Serial Converter
    Ref.: OEM-W2RS485-V3
    The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.
    V.A.T. included
    504.30 €
    RFIdeas® Wiegand-RS232 Serial Converter w/o relay [OEM-W2RS232-V3M]
    RFIdeas® Wiegand-RS232 Serial Converter w/o relay
    Ref.: OEM-W2RS232-V3M
    The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.
    V.A.T. included
    432.32 €
    RFIdeas® Wiegand-RS232 Serial Converter [OEM-W2RS232-V3]
    RFIdeas® Wiegand-RS232 Serial Converter
    Ref.: OEM-W2RS232-V3
    The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.
    V.A.T. included
    504.30 €
    SYSAWAY© 2024 All rights reserved