DUAL iris recognition camera, 5 Mpixels, with flash incorporated. Color LCD screen. HID® OMNIKEY™ Read/ Write included for smart cards (13,56 MHz HID® iCLASS™, MIFARE®, DESFire®)embedded. TCP/IP Connection.

Thanks to its optical sensor it provides maximum safety, high reliability and a quick response to fingerprint reading. It works both indoors and outdoors, under any weather condition. It is completely based on IP technology. It combines the functions of a traditional controller with the functions of a terminal access device. Its characteristic design is impressive, as well as attractive thanks to its easy installation and configuration. Naturally, it can also be connected to the 2N IP intercoms, thus offering you a comprehensive solution for the access systems that you can easily manage through the 2N® Access Commander software.

All-in-1 terminal for facial access control with fever detection and mask. 10.1'' touch screen. Temperature detection through the face or other body part. Body temperature detection between 30 ºC and 45 ºC, with a temperature deviation of +/- 0.5 ºC and a distance of Measurement from 0.3 to 2 m. Mask detection and facial verification available with mask. Capacity of up to 50,000 (1: N) faces and 100,000 events. TCP / IP communication, Wiegand input and output, WiFi and RS-485. Mounting indoors with totem included Power supply: 12 Vdc Maximum consumption of 2 A. Includes power supply.

Face recognition access control terminal integrates face recognition technology and non-contact temperature detection technology. The digital detection module supports rapid body temperature detection. Thus, the product can achieve face recognition and temperature detection at the same time and support warning people with abnormal body temperature. It can be widely applied in the crowded places, such as smart communities, schools, office buildings, hospitals and other important areas. Support non-contact detection of wrist temperature, support warning people with abnormal body temperature. Support configure temperature detection threshold value, and personnel access authority can be configured through temperature detection threshold value. Non-contact wrist temperature detection module, measurement range is between 30 ºC to 45 ºC, measurement accuracy can reach 0.1 ºC, measurement deviation is less than or equal to 0.3ºC, and measurement distance is between 1cm to 3cm. Face recognition accuracy rate > 99%, false rate < 1%. Built-in deep learning dedicated chip, supports local offline recognition, 10.000 face capacity, face whitelist (1? N). Fastest recognition time 0.2 seconds. WDR, 2MP (1080P) low illumination wide-angle camera and F1.6 large aperture lens for capturing high quality image with various complex lighting scenes. Support anti-spoofing detection based on deep learning algorithm, effective against fraud such as photo and video. Support face metering and human metering for fast adapting to ambient light. Suggested height for face recognition: between 0.8m and 2.2m, face recognition distance: 0.2m to 2.9m. Support screen sleep mode, keep the minimum brightness to prevent glare at night. Support add up to 6 photos of the base library for a single person. Support video capture, support ONVIF protocol. Support face, card, password and QR code authentication to control door open. Built-in 4G EMMC front end storage, stable and reliable, up to 30,000 events capacity (with images). Support tamper protection, support door open timeout and time exceed alarm function to keep door opening during fire alarm active. Interfaces: LAN x 1, Wiegand Input x 1, Wiegand Output x 1, RS485 x 1, Alarm Input x 2, Alarm Output x 1, USB2.0 x 1, Lock x 1, Door Contact x 1, Exit Button x 1.

The face recognition reader can work with GV-AS Controller and GV-ASManager to create a complete access control system. Two types of operation modes are supported: Face Recognition or Card. 2.4" TFT color screen, 320 x 240 pixel display. Special stereo dual sensors (Lens and IR sensor). Up to 80 cm (31. 50 in) detection range. 2000 face capacity. ? 0.5 second verification speed. 16-bit Hi-Fi voice and sound indication. 12V DC, 2 A (only for standalone operation) / PoE+ (IEEE 802.3at). Built-in 13.56 MHz Reader. Work with GV-AS21 / 41 / 81 series Controller and GV-ASManager. Can work as a standalone reader. Two (2) access modes for the integration with GeoVision controller and software: Face Recognition mode or Card mode. Anti-Passback (APB) support. CE, FCC compliant.

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only. Can be a standalone fingerprint reader. Three types of access modes: card only, fingerprint only and card plus fingerprint. Connect with GV-AS Controller through TCP/IP interface (WAN). Enroll fingerprints through TCP/IP connection with GV-ASManager (Fingerprint Only Mode). Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security. Capacitive sensor for GV-GF1921 / Optical sensor for GV-GF1922.

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only. Can be a standalone fingerprint reader. Three types of access modes: card only, fingerprint only and card plus fingerprint. Connect with GV-AS Controller through TCP/IP interface (WAN). Enroll fingerprints through TCP/IP connection with GV-ASManager (Fingerprint Only Mode). Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security. Capacitive sensor for GV-GF1921 / Optical sensor for GV-GF1922.

The ievo Micro™ fingerprint reader is a solution suitable for indoor installation. Its optical sensor offers fast, accurate and reliable biometric security. Using the Wiegand outputs of the MB controller, you can integrate the ievo system with any other access control system such as ATRIUM, managing up to a maximum of 50,000 fingerprints. Proximity Card Reading

The ievo Micro™ fingerprint reader is a solution suitable for indoor installation. Its optical sensor offers fast, accurate and reliable biometric security. Using the Wiegand outputs of the MB controller, you can integrate the ievo system with any other access control system such as ATRIUM, managing up to a maximum of 50,000 fingerprints.

The ievo Ultimate™ fingerprint reader is suitable for outdoor installation thanks to its IP65 degree of protection and its high vandal resistance. It captures multispectral images of the fingerprint, recording not only the surface of the finger, but also penetrating up to 4 mm below the surface layer. This allows it to work smoothly in environments where it would be impossible for other readers. It requires connecting to an MB controller, being able to manage in this case up to a maximum of 50,000 user fingerprints. Proximity Card Reading

The ievo Ultimate™ fingerprint reader is suitable for outdoor installation thanks to its IP65 degree of protection and its high vandal resistance. It captures multispectral images of the fingerprint, recording not only the surface of the finger, but also penetrating up to 4 mm below the surface layer. This allows it to work smoothly in environments where it would be impossible for other readers. It requires connecting to an MB controller, being able to manage in this case up to a maximum of 50,000 user fingerprints.

This housing includes a thermostat that, when 12 ° is reached, activates a heater until the internal temperature reaches 18 °. The enclosure includes the following: 1 fan. 1 heater. 1 thermostat. 1 20A power supply. 1 stainless steel casing.

Support element to place the scanner at a certain height (144.80 cms). Ideal for adults, for placement on the floor.

Support element to place the scanner at half height (90 cms). Ideal for children, for placement on the floor.

Support element to place the scanner at a low height (34.29 cms). Ideal for lathe surface or on the reception desk table.

Standalone facial recognition terminal with temperature measurement. Capacity of up to 30,000 faces. Temperature sensor accurate to 0.30 ° C. Stands available in desktop version (C20), for children (C60) and for adults (C110). Operating temperatures: 10 ° C to 50 ° C. Degree of protection IP66. Ideal for health management. Screen: 7-inch IPS HD LCD, 600 * 1024. Measuring distance: 0.50 to 1.30 m (recommended: 0.75 m). Accuracy: +/- 0.30 ° C. Detection: Body temperature, mask. Housing material: Aluminum alloy, ultra-white tempered glass panel. Dimensions (cm): 22.80 x 11.20 x 2.20. Protocol: IPv4, TCP / IP, HTTP. Interface: RJ45 10M / 100M. Relay output: 1 output C - N.A. - N.C. Installation: On the floor, door, desk, bracket, wall. FACIAL RECOGNITION -> Posture: Vertical 58 ° - 60 °, horizontal 35 °. Occlusion: Ordinary glasses have no effect on recognition ability. Response speed: 200 ms. Zone: Full screen recognition. The FTC1000 is not a medical device and should not be used for the diagnosis of any disease or other conditions.

Biometric stand alone fingerprint reader for BIOSYS1.

Biometric stand alone fingerprint reader, 500 users, remote electronics, single door management, includes 1 master card and 10 user cards.

Surface mount adapter for wall mount installations, made of stainless steel, for FR1500 series readers.

Flush mount adapter for turnstile, made of stainless steel, for FR1200 series readers.

IP Biometric Access Control Anti-Vandal for Outdoor. Industrial Design Anti-Vandalism. Waterproof with IP65 Protection Index. Compatible with the FR1200 Slave Reader. Easy Installation and Connectivity. TCP / IP and RS485 interface. Tamper Anti-Tamper and Alarm Output. Compatible with inBIO panels as an RS485 reader. Capacity of Up to 3,000 Footprints 30,000 Cards and 100,00 Events. Wiegand Output for Connection with Access Panels.

Slave fingerprint reader with SilkID sensor. Detection of living tissue. Elegant design for a wall-mounted installation. RS-485 communication interface. Stainless steel front housing. Standard connection box. Fingerprint sensor protective cover (optional). MIFARE® RFID reader (S50 / S70) 13.56MHz built-in. IP65.

Slave fingerprint reader with SilkID sensor. Detection of living tissue. Elegant design for a wall-mounted installation. RS-485 communication interface. Stainless steel front housing. Standard connection box. Fingerprint sensor protective cover (optional). Built-in 125KHz RFID reader. IP65.

Slave fingerprint reader with SilkID sensor. Detection of living tissue. Elegant design for a wall-mounted installation. RS-485 communication interface. Stainless steel front housing. Standard connection box. Fingerprint sensor protective cover (optional). MIFARE® RFID reader (S50 / S70) 13.56MHz built-in.