ProFAC is an access control terminal with facial recognition technology and RFID reader. With the latest ZKFACE v7.0 high-speed algorithm and the ZMM220 hardware platform, equipped with a fast 1.2 GHz processor, user verification is extremely fast. The ProFAC can store up to 4,000 facial templates (1: 1) or 2,000 (1: N) and 10,000 RFID cards. It is compatible with third-party access panels through the Wiegand output.

ProCapture-X is an access control terminal with the most advanced SilkID fingerprint sensor, which provides exceptional fingerprint identification before dry, wet and rough fingers, being able to perform live finger detection for a higher level of security. The fingerprint verification speed has been significantly increased by the optimized fingerprint algorithm and the new hardware platform ZMM220, which is equipped with a fast 1.2 GHz processor. The touchpad allows you to easily operate the device to manage users and perform the adjustment of the access control parameters among others. Allows PoE power. Footprint capacity: 20,000. Card capacity: 50,000. Event capacity: 500,000. Reader: 125KHz / Mifare (Optional).

ProCapture-WP is an access control terminal with the most advanced SilkID fingerprint sensor, which provides exceptional fingerprint identification before dry, wet and rough fingers, being able to perform live finger detection for a higher level of security. The fingerprint verification speed has been significantly increased by the optimized fingerprint algorithm and the new hardware platform ZMM220, which is equipped with a fast 1.2 GHz processor. The touchpad allows you to easily operate the device to manage users and perform the adjustment of the access control parameters among others. Its integrated camera allows the realization of event photo capture to provide evidence of assistance, as well as its use for user photo capture (optional). Footprint capacity: 6,000. Card capacity: 10,000. RFID Reader: EM / Optional Mifare. Transfers in memory: 100,000. IP65

ProCapture-T is an access control terminal with the most advanced SilkID fingerprint sensor, which provides exceptional fingerprint identification before dry, wet and rough fingers, being able to perform live finger detection for a higher level of security. The fingerprint verification speed has been significantly increased by the optimized fingerprint algorithm and the new hardware platform ZMM220, which is equipped with a fast 1.2 GHz processor. The touchpad allows you to easily operate the device to manage users and perform the adjustment of the access control parameters among others. Its integrated camera allows the realization of event photo capture to provide evidence of assistance, as well as its use for user photo capture (optional). Footprint capacity: 6,000. Card capacity: 10,000. RFID Reader: EM / Optional Mifare. Transfers in memory: 100,000.

ProRF-T is an RFID access control terminal that incorporates a 2.4-inch TFT-LCD screen. The color display and the modern firmware structure offer an intuitive menu for easy management. The integrated camera allows you to capture photos of the events or take the photo of the users. The new ZMM220 hardware platform is equipped with a fast 1.2 GHz processor, significantly increasing the speed of verification. The touch keyboard allows you to easily operate the device to perform device management. Card capacity: 50,000. RFID Reader: EM / Optional MIFARE. Transfer capacity: 100,000.

The G3-PLUS terminal with multi-biometric identification incorporates the revolutionary SilkID fingerprint sensor, which, with the Neuron 3D algorithm, is able to verify fingerprints quickly and accurately even with dry, wet or rough fingers. Using IR technology, the device is automatically activated when the fingerprint is detected. With the latest facial algorithm, it is possible to perform the detection of false faces. Footprint capacity: 5,000. Facial capacity: 3,000 (1: N) / 4,000 (1: 1). Card capacity: 10,000. (Optional). Transfer capacity: 100,000. RFID: EM 125 KHz.

The G3 terminal with multi-biometric identification incorporates the revolutionary SilkID fingerprint sensor, which, with the Neuron 3D algorithm, is able to verify fingerprints quickly and accurately even with dry, wet or rough fingers. Using IR technology, the device is automatically activated when the fingerprint is detected. With the latest facial algorithm, it is possible to perform the detection of false faces. Footprint capacity: 5,000. Facial capacity: 3,000 (1: N) / 4,000 (1: 1). Card capacity: 10,000. (Optional). Transfer capacity: 100,000. RFID: EM 125 KHz.

The G2 terminal incorporates the revolutionary SilkID fingerprint sensor. With Neuron 3D fingerprint verification, IR activation, the sensor is able to verify fingerprints quickly and accurately even with dry, damp or rough fingers, and can also work in intense sunlight. With the latest hardware platform. It allows 20,000 tracks, 20,000 tarejtas and up to 200,000 signings stored inside. RFID: EM 125 KHz.

The SilkBio-101TC is a multi-biometric device for time management and assistance. It also has access control applications, integrated with the modern and powerful SilkID fingerprint reader, facial recognition and ID cards. The new SilkID fingerprint reader allows verification to be done accurately even with rough or wet fingers. With an ultra-thin design, this hybrid biometric terminal can also be easily connected via Wi-Fi. All the new and innovative features, as well as the latest facial verification algorithm, make us enjoy a whole new security experience with the SilkBio-101TC. It is recommended to use it with the ZKTime™ Small Business software (ref.: ZKT-SM-x) or ZKTime™ Enterprise (ref.: ZKT-NT-x). Optional EM / MIFARE® RFID (not included).

The uFace402 multi-biometric terminal incorporates the New Firmware with even more intuitive operation. It is ideal for companies in the industrial sector. Its installation is simple, being able to download signings to a Pen Drive if you do not want to connect to the Network. In addition, it incorporates a relay that allows the opening of a door or activating a siren. It is recommended to use the ZKTime™ Small Business software (ref.: ZKT-SM-x) or ZKTime™ Enterprise (ref.: ZKT-NT-x) for the management of signings. Different modes of operation: Face recognition, fingerprint, card (optional) and keyboard. TFT 4.3 'touch screen with simple operation and modern interface. Infrared optical system that allows user identification in dark environments. Integrated camera. Autonomous or PC operation: you do not need to be connected to a PC to sign, store the data in the terminal. It incorporates USB port for downloading signings. It allows the display in the terminal of the name (Alias) or photograph of the person. It admits the introduction of incidents that can be listed on the display: medical, food, commercial exit, etc ... Automatic "entry / exit" mode. Basic consultation of signings from the terminal. It incorporates battery backup. RFID EM included. Optional RFID MIFARE® (not included).

The UFACE401 terminal incorporates the New Firmware with even more intuitive operation. It is ideal for companies in the industrial sector. Its installation is simple, being able to download the signings to a Pen Drive if you do not want to connect to the Network. In addition, it incorporates a relay that allows the opening of a door or activating a siren. It is recommended to use the ZKTime™ Enterprise software for the management of signings (ref.: ZKT-NT-x). It incorporates battery backup. Different modes of operation: Face recognition, card and keypad. TFT 4.3'' touch screen with simple operation and modern interface. Infrared optical system that allows user identification in dark environments. Integrated camera. Autonomous or PC operation: you do not need to be connected to a PC to sign, store the data in the terminal. It incorporates USB port for downloading signings. It allows the display in the terminal of the name (Alias) or photograph of the person. It admits the introduction of incidents that can be listed on the display: medical, food, commercial exit, etc ... Automatic "entry / exit" mode. RFID EM included. Optional RFID MIFARE® (not included).

The VF380 facial recognition and proximity card terminal is ideal for offices and industrial environments. It has an easy to use color touch screen. You can download signings to a Pen Drive if you do not want to connect to the Network. In addition, it incorporates a relay that allows the opening of a door or activating a siren. Elegant and functional design. Different verification modes: facial recognition, card and keyboard. It incorporates USB port for downloading signings. Operation with PC or freelance does not need to be connected to PC to sign. Allows display in the name terminal (Alias). It admits signings with incidents (doctor, breakfast ...). Use with ZKTime™ Small Business software (ref.: ZKT-SM-x) and ZKTime™ Enterprise (ref.: ZKT-NT-x) is recommended. RFID EM included. Optional RFID MIFARE® (not included).

Portable T&A control waterproof, dustproof and shockproof. The S922 terminal is designed for presence control management outside companies, specializing in construction, logistics industries and the mining industry. Upper handle of the rubber coating, which allows users to easily transport it. IP65 waterproof and dustproof protection. Shockproof (0.5 m above the ground) due to its exclusive rubber coating. Built-in 7600 mAh backup battery extending the operating time. Communication: TCP / IP, USB-host, Optional: Wi-Fi and 3G. Multiple authentications: fingerprint, card or keyboard. Fingerprint capacity: 5,000 (standard) / 10,000 (optional). Card capacity: 30,000. Optional EM / MIFARE® RFID (not included).

Portable T&A control waterproof, dustproof and shockproof. The S922 terminal is designed for presence control management outside companies, specializing in construction, logistics industries and the mining industry. Upper handle of the rubber coating, which allows users to easily transport it. IP65 waterproof and dustproof protection. Shockproof (0.5 m above the ground) due to its exclusive rubber coating. Built-in 7600 mAh backup battery extending the operating time. Communication: TCP / IP, USB-host, Optional: Wi-Fi and 3G. Multiple authentications: fingerprint, card or keyboard. Fingerprint capacity: 5,000 (standard) / 10,000 (optional). Card capacity: 30,000. Optional EM / MIFARE® RFID (not included).

T&A and access control terminal with proximity. The most complete of iClock terminals for presence control and access through RFID technology. Available with the new Firmware. It has a relay, Wiegand and Antipassback and has the possibility of incorporating WIFI, 3G (not compatible with Camera). Different modes of operation: card and card + PIN. The signing mode is configurable by employee. It incorporates USB port for downloading signings. Autonomous or PC operation: you do not need to be connected to a PC to sign. Allows display in the name terminal (Alias). Supports the introduction of incidents that can be listed on the display. Automatic "input / output" mode. It is recommended for management to use the ZKTime™ Enterprise program (ref.: ZKT-NT-x). RFID EM included. Optional RFID MIFARE® (not included).

T&A and access control terminal with FPiclock680 fingerprint. The most complete of the iclock terminals for presence and access control with an updated and innovative Firmware. It has a relay, Wiegand and Antipassback and has the possibility of incorporating WIFI, 3G. Different modes of operation: fingerprint and code + fingerprint. Optionally: card + fingerprint, card and card + code. The signing mode is configurable by employee. It incorporates USB port for downloading signings. Autonomous or PC operation: you do not need to be connected to a PC to sign. Allows display in the name terminal (Alias). Supports the introduction of incidents that can be listed on the display. Assignment of incident keys with the function keys. Automatic "input / output" mode. It incorporates camera to register the user. It is recommended for management to use the ZKTime™ Enterprise program (ref.: ZKT-NT-x). Optional EM / MIFARE® RFID (not included).

Easy to install and with modern design, it is the perfect solution for all types of installations. The color TFT screen offers users easy menu management. iClock-580 is based on the ZEM800 platform that allows for greater memory capacity and professional firmware functions. You can connect to the Time and Attendance management software via Ethernet or USB port (optional Wifi and GPRS), and it also works in independent mode, downloading data via USB pendrive. For access control, it allows time zones and groups and the relay can be connected to block or external siren. It is recommended for management to use the ZKTime™ Enterprise program (ref.: ZKT-NT-x). Optional EM / MIFARE® RFID (not included).

EM proximity terminal for T&A, with 3.5'' TFT display with graphical interface. Capacity for 10,000 cards and 200,000 events. 8 function keys definable according to the day of the week or time slot. Accumulated balance per user. Web server built-in. User-defined pendrive download structure. RS-232/485, TCP / IP, USB communication. Professional firmware with advanced functions. Vocal indications (male or female voice). PoE power supply. Multilanguage. Working temperature: 0 to 45 ºC. 5 V / 1.5 A power supply included. Fingerprint verification time <1 s. Dimensions: 136 x 189 x 44 mm. Optional modules: Mifare® and Wifi Proximity. EM RFID included.

The IN01A is a T&A and biometric access control terminal which supports a 2000 mAh backup battery. Allows you to make the signing via fingerprint, keyboard and, optionally, RFID (proximity card). It allows different functions through its relay such as door opening or siren activation, lathe integration, etc ... Its design is original, attractive and has a 3'' color display with intuitive menu for all user levels. RFID EM included. Optional RFID MIFARE® (not included).

U300C is a terminal for the control of registration (time and attendance) of employees. Easy to install, and with a modern design, U300-C is the perfect solution for SMEs. The color TFT screen offers users easy menu management. It allows communication via Ethernet or USB, and also works in independent mode, downloading data via USB flash drive. It is recommended to use it with the ZKTime™ Small Business software (ref.: ZKT-SM-x). Allows the display of the name (Alias) of the person you are signing. Different modes of operation: Fingerprint only, Code + Footprint and Code + Password. It incorporates USB port for communication with the PC or for downloading signings to a portable unit (Pendrive or Flash Disk). Automatic summer-winter time change. It allows the response of the terminal when signing through voice. Supports the introduction of unlimited incidents (Smoking, Food, Affairs, Medical, etc ...). Optional EM / MIFARE® RFID (not included).

The MV360 terminal is an innovative multi-biometric device for T&A. It also supports basic Access Control functions. It also supports verification methods through facial recognition, fingerprint, card, password and combinations between the previous ones. The verification is carried out in less than 1 second, so the process is expedited at the time of entry and exit. Communication between the MV360 and the PC is done through the TCP / IP interface or via USB, for manual data transfer. It is recommended to use it with the ZKTime™ Small Business software (ref.: ZKT-SM-x). Optional RFID EM (not included).

The MV160 terminal is an innovative multi-biometric device for T&A management. It also supports basic Access Control functions. It also supports verification methods through facial recognition, fingerprint, card, password and combinations between the previous ones. The verification is carried out in less than 1 second, so the process is expedited at the time of entry and exit. Communication between the MV160 and the PC is done through the TCP / IP interface or via USB, for manual data transfer. It is recommended to use it with the ZKTime™ Small Business software (ref.: ZKT-SM-x). Optional RFID EM (not included).

UA860 is a biometric terminal with 2.8'' color screen, designed to perform T&A and access control. Integrated with the BioID fingerprint reader. It is possible to manage the UA860 with its TCP / IP, Wi-Fi network interface or through its USB port for data transfer and avoid the risk of accidentally erasing the information. Features: (1) Wi-Fi: the WiFi module is integrated. It is working in the 2.4G radio band and complies with IEEE 802.11b / g / n standards. (2) USB: Support USB host connection to achieve backup and data management while the device is independent. (3) WDMS: Optional for devices worldwide using. Resolve the device capacity limitation across networks through the HTTP server. Mondial devices can connect and load and backup data automatically. This is useful for device management and supervision. (4) BioID: use of the BioID fingerprint collector for an excellent recognition rate. Dry, wet or rough fingerprints can work well. Optional RFID EM (not included).

The UA760 is a T&A terminal (control of registration of working hours), which recognizes users for their fingerprint, offering high security. It also incorporates the option of access control functions (open doors and sirens). This is a 2.8 inch color screen biometric terminal for employee registration applications (time and attendance). The terminal is presented with an elegant and modern design. This access control system consists of the physical terminal and the application or software. It is therefore an indispensable terminal to compute the control of the presence in the company, and thus have registered the working day of each worker. Compatible with Small Business software. Optional RFID EM (not included).