Access control reader with double technology: proximity and keypad, on the same board. Independent or joint operation for greater security. (1) Independent operation: (1.1) Proximity, which allows the door to be opened by approaching a proximity card or key fob. (1.2) Keypad, which allows the door to be opened by entering a previously programmed code of up to 6 digits. (2) Joint operation for greater security: card + PIN code. (2.1) Reader that allows the door to be opened by approaching a proximity card or keyfob + a 4-digit PIN code. (2.2) Proximity reader that by means of a dipswitches configuration (SW2) that it incorporates can work in an autonomous or centralized system. OPTION 1: Configuration as CENTRALIZED MDS-AC Plus. OPTION 2: Configuration as CENTRALIZED with Wiegand 26 protocol. Frequency: 125kHz.

Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Device that can be used in centralized access control systems "MDS" and/or "AC Plus". 12 Vdc ± 10% power supply (CN1). Consumption. 15 mA min; 100 mA max. Operating temperature 0 ÷ +60 ºC with H.R. 90% non-condensing. Dimensions: 85 x 88 x 25 mm.

Digital keypad that allows the door to be opened by entering a 4- to 6-digit code previously programmed in the central controller, necessary for its operation. For centralized access control installations, where a PC code change or event registration is required, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, offices, garages. Requires an external centralized controller such as ACMAX, AC-PLUS or IP_AXES. Wiegand 4 or 8 bit keypad protocol. IPK 5409. 12VDC supply.

Access control module, to be incorporated into door entry/video entry panels. Digital keypad that allows the door to be opened by entering a previously programmed 4 to 6 digit code in the central controller, necessary for its operation. Skyline is the "modular" type entrance panel line. This new model of plate is more robust, more luxurious and of higher aesthetic and functional quality. It is characterized by its curved-convex profile. They are made of anodized aluminum, highly resistant to weathering and climatic changes. It incorporates new materials such as chrome plated zamak and buttons. For centralized access control installations, where a PC code change or event registration is required, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, offices, garages. 12VDC power. Wiegand 4 or 8 bit keypad protocol. IPK 5407.

This new model of plate is more robust, more luxurious and of higher aesthetic and functional quality. It is characterized by its curved-convex profile while maintaining the same characteristics as its predecessor. There is full compatibility between both models, ensuring immediate replacement and replacement. They are made of anodized aluminum, highly resistant to weathering and climatic changes. It incorporates new materials such as the Zamak chrome in heads and buttons. Aluminum color. Centralized access control system. For installations that require a PC code change or event log. Requires an external centralized controller such as AC-MAX, AC-PLUS or IP_AXES. 12VDC power.

Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Device that can be used in centralized access control systems "MDS" and/or "AC Plus". 12 Vdc ± 10% power supply (CN1). Consumption. 15 mA min; 100 mA max. Operating temperature 0 ÷ +60 ºC with H.R. 90% non-condensing. Dimensions: 85 x 88 x 25m

VingCard® Elevator Multi-Output Controller (MEC). RFID Elevator Controller for VISIONLINE systems are designed to fit into elevator panels and can be operated off- or online. 7-8 relay outputs to selectively enable the elevator call buttons is delivered as standard. Interoperable with 13,56 MHz technologies (MIFARE® [ISO 14443-A], ISO1443-B, ISO 15693, NFC and BLE including mobile devices utilizing Seos™, among others) with anti-counterfeiting VingCard® codification. Can also control different devices such as electric strikes and motor locks.

VingCard® Elevator Multi-Output Controller (MEC). RFID Elevator Controller for VISIONLINE systems are designed to fit into elevator panels and can be operated off- or online. 7-8 relay outputs to selectively enable the elevator call buttons is delivered as standard. Interoperable with 13,56 MHz technologies (MIFARE® [ISO 14443-A], ISO1443-B, ISO 15693 and NFC, among others) with anti-counterfeiting VingCard® codification. Can also control different devices such as electric strikes and motor locks.

VingCard® Multi-Output Controller (MOC). RFID Controller for VISION systems are designed to fit into elevator panels and can be operated off- or online. 7-8 relay outputs to selectively enable the elevator call buttons is delivered as standard. Interoperable with 13,56 MHz technologies (MIFARE® [ISO 14443-A], ISO1443-B, ISO 15693, NFC and BLE including mobile devices utilizing Seos™, among others) with anti-counterfeiting VingCard® codification. Can also control different devices such as electric strikes and motor locks.

VingCard® Multi-Output Controller (MOC). RFID Controller for VISION systems are designed to fit into elevator panels and can be operated off- or online. 7-8 relay outputs to selectively enable the elevator call buttons is delivered as standard. Interoperable with 13,56 MHz technologies (MIFARE® [ISO 14443-A], ISO1443-B, ISO 15693 and NFC, among others) with anti-counterfeiting VingCard® codification. Can also control different devices such as electric strikes and motor locks.

Needed for access where is not possible to install a smart lock, such us vehicle access, emergency access and all kind of doors in general where is not possible to embed them. It works with multiple controllers. Interoperable with 13,56 MHz technologies (MIFARE® [ISO 14443-A], ISO1443-B, ISO 15693 and NFC, among others) with anti-counterfeiting VingCard® codification.

Control of up to 30 teams distributed in different floors or zones / groups of the building. 15 "touch screen navigation in a simple and friendly way. View of the corridors with camera connected via IP (optional). State (door and communication). Entry / Exit Count (resettable). Alarms / errors. Possibility of visualizing which lathe fails and the cause of the alarm. Programming times / dates for different areas of lathes allowing to program changes of automatic step mode. Possibility of setting x 'seconds allowing synchronization with the "Access Control" system and programming events or different modes of operation of the lathes in different time zones of the day / week / year.

The Smart Touch product offers a simple and elegant solution to manage remotely, through an Ethernet network, one or two zones of access control equipment. It is presented in the form of a 10-inch PC panel with a touch screen that offers a clear representation of the installation through several images. The Smart Touch interface allows you to remotely monitor one or two zones, and up to 10 aisles per zone. Smart Touch allows, among other things: (1) add or remove equipment; (2) choose the operating mode in both directions of passage; (3) grant one or more authorizations to pass through a specific team; (4) activate evacuation mode throughout the site; (5) visualize alarms and technical failures. Access to this application is blocked by username and password and has two levels of access depending on the type of user (administrator or operator), which offer different levels of functions.

The Smart Touch product offers a simple and elegant solution to manage remotely, through an Ethernet network, one or two zones of access control equipment. It is presented in the form of a 10-inch PC panel with a touch screen that offers a clear representation of the installation through several images. The Smart Touch interface allows you to remotely monitor one or two zones, and up to 10 aisles per zone. Smart Touch allows, among other things: (1) add or remove equipment; (2) choose the operating mode in both directions of passage; (3) grant one or more authorizations to pass through a specific team; (4) activate evacuation mode throughout the site; (5) visualize alarms and technical failures. Access to this application is blocked by username and password and has two levels of access depending on the type of user (administrator or operator), which offer different levels of functions.

Smart & Slim : Wired connexion kit - Up to 15 corridors (Including 1*Switch Ethernet 16 ports & 15*cables Ethernet with RJ45 20m connectors). In addition to the Monitoring Panel option, customers who want to connect the lanes to a network may wish to purchase the optional Connectivity Kit. The connectivity kit consists of a network switch and 50-foot cables. This kit will simplify installation since a single network cable between the array and the customer’s network is sufficient to connect all lanes of the same array.

Smart & Slim : Wired connexion kit - Up to 7 corridors (Including 1*Switch Ethernet 8 ports & 7*cables Ethernet with RJ45 20m connectors). In addition to the Monitoring Panel option, customers who want to connect the lanes to a network may wish to purchase the optional Connectivity Kit. The connectivity kit consists of a network switch and 50-foot cables. This kit will simplify installation since a single network cable between the array and the customer’s network is sufficient to connect all lanes of the same array.

A true control center, the Smart n’ Slim Monitoring Panel manages multiple Security Entrance Lanes, regardless of where the units are located. The Smart n’ Slim Monitoring panel is a flexible command center and allows for visualization, control, and consultation. It is offering an ideal solution to access the man-machine interface via an existing work station, or simply by connecting the server to a screen and mouse/keyboard. This server can be installed at the guard desk or in a secured closet (preferred location). The centralized server model requires no assembly. The servers are always needed. They are sold as an appliance. The software cannot be installed on the client servers. (1) Plug & Play installation. The server is shipped preconfigured for easy setup. Only the site specific configuration will need to be done at time of installation. (2) The server can be connected to the customer’s network for remote access, or can be used on an independent network with the turnstiles. (3) 100-240 VAC / 50-60 Hz power supply cord. (4) User-friendly program for lane management. (5) Password protected access with multiple user access levels.

Set of several models with desk form factor or console, especially suitable for control and visualization applications. Manufactured in high quality injected ABS. 1070 aluminum panels, thickness 2 mm. matt natural anodized. Anchoring in the base to facilitate the assembly of circuits and eurocards. Each unit includes: lid, base, panels, non-slip feet and screws. Supplied in polar gray and black colors.

Set of several models with desk form factor or console, especially suitable for control and visualization applications. Manufactured in high quality injected ABS. 1070 aluminum panels, thickness 2 mm. matt natural anodized. Anchoring in the base to facilitate the assembly of circuits and eurocards. Each unit includes: lid, base, panels, non-slip feet and screws. Supplied in polar gray and black colors.

A true control center, the Smart n’ Slim Monitoring Panel manages multiple Security Entrance Lanes, regardless of where the units are located. The Smart n’ Slim Monitoring panel is a flexible command center and allows for visualization, control, and consultation. It is offering an ideal solution to access the man-machine interface via an existing work station, or simply by connecting the server to a screen and mouse/keyboard. This server can be installed at the guard desk or in a secured closet (preferred location). The centralized server model requires no assembly. The servers are always needed. They are sold as an appliance. The software cannot be installed on the client servers. (1) Plug & Play installation. The server is shipped preconfigured for easy setup. Only the site specific configuration will need to be done at time of installation. (2) The server can be connected to the customer’s network for remote access, or can be used on an independent network with the turnstiles. (3) 100-240 VAC / 50-60 Hz power supply cord. (4) User-friendly program for lane management. (5) Password protected access with multiple user access levels.

An application designed for user-friendly configuration of turnstiles and control electronics. Time lock for insolvent end users. (TMON software required). License for instalation site/reception.

Application designed for easy remote control of the turnstiles and gates. Online monitoring and controlling of the turnstile. License for instalation site/reception.

Remote control console specifically designed for reception and security desk applications. Unlimited number of controlled lanes scalable to the specific site layout. Emergency button not available. Touch Panel/Desk - special designed version with stainless steel frame to inbuilt it to the reception desk.

Remote control console specifically designed for reception and security desk applications. Unlimited number of controlled lanes scalable to the specific site layout.