TCP/IP board for ENTRY™ and TRANSIT ™ readers over ETHERNET™ networks.

The HID® Interface Board enables decoding of HID® Prox™ cards by the TRANSIT™ ENTRY™ reader in case of Booster ™ applications used in combination HID® Prox™ cards.

The Multi Technology Reader (MTR) module, for installation with ENTRY ™ readers, allowing to read LF 125 KHz and 13.56 MHz HF credentials based on HID® EM®, MIFARE® and LEGIC®.

Ethernet module for GEOVISION control units.

GV-FWC can integrate GV-Face Recognition Cameras into access control systems by sending access card data, paired to Face IDs, to controllers either through TCP/IP or Wiegand connection. When connected via TCP/IP, a face image is transmitted along with the access data upon face recognition.

GV-WTR is a converter designed for enabling the integration of a 3rd-party Wiegand or GV-RS-485 interface reader to a GV-RS-485 or Wiegand controller, respectively. Through the GV-WTR, both Wiegand / GV-RS-485-interface readers can be easily combined to a wide range of access control systems for improved versatility.

The Remote Management IP Terminal allows the connection between the PC and the installation through the ethernet network and the Internet, thus being able to remotely configure, control and manage the installations, avoiding additional wiring. The Remote Management Terminal is in charge of converting the TCP / IP packets into serial data, so that the installation is able to interpret them in the same way as if it were connected directly to the PC.

Interface that allows the local connection between the PC (USB port) and the installation, thus being able to configure, control and manage the installations. Used for maintenance of installations that do not have the PC permanently connected, as an installer tool. PC connection: USB (USB cable included). Installation connection: RS-485 via molex or twisted pair connector (max 1000 meters).

Interface that allows the local connection between the PC (serial port) and the installation, thus being able to configure, control and manage the installations. Used for management and maintenance of facilities that have the PC permanently connected. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. PC connection: Serial port (RS-232), max 30 meters (including 3 meter cable). Installation connection: RS-485 (twisted pair), max 1000 meters.

RS485 to TCP / IP converter for a network of biometric readers of up to a maximum of 31 devices. DIN rail installation. It requires configuration software model BioManager, which can discover all the readers of the network automatically. Dimensions: 90x37x33mm. Power supply: 12 Vdc. Consumption: 100 mA

BioMini incorporates high quality optical sensor that can capture fingerprints at resolution of 500dpi. The sensor also features IP65 protection on its surface for protection against dust and water to ensure high performance.

The converter output is sent to the USB port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

The converter output is sent to the USB port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

The converter output is sent to the serial port either as ASCII characters or through a callable DLL for software developers. Selectable card information can be configured in the converter’s flash memory using free software. Perfect for those requiring pcProx Enroll functionality but require an outdoor reader with longer read range.

External BLE antenna for HID® OMNIKEY™ 5127. Uses standard U.FL coaxial connector. Other standard external Bluetooth antennas can be used (no special tuning requirements). MOQ=20 units (in mults of 20).

HF/LF external antenna for HID® OMNIKEY™ 5127. Dimensions: 37.1 x 27.6 x 0.7 mm. Tuned for "folded" orientation. 3mm gap from Reader Core to upper surface. DTK has sample spacer placing reader core and board in correct alignment. Many applications will require custom antenna tuning or designs to optimize performance in given environment. MOQ=20 units (in mults of 20).

Contactless smart card module (iCLASS Seos®, iCLASS SE®, HID Prox®, MIFARE™ Classic and MIFARE™ DESFire™ EV1 / EV2) and HID® Mobile Access™ (NFC and BLE) compatible with Android™ and iOS™ Apple™ (Includes Apple's Enhanced Contactless Polling (ECP) application to support credentials in Apple Wallet), with USB connection (1.1 and 2.0) and UART for integration with consumer equipment. Fully integrated with HID® applications. CCID certificate. Keyboard emulation interface. Optional mounting accessories and DTK available. Requires external antennas to be purchased separately (A51270030 and A51270031). Dimensions: 27 x 26 x 5.3 mm. MOQ=20 units (in mults of 20).

Smart card dual module (RFID 13.56 MHz + contact via SAM interface, ID-1 format), with USB connection (1.1 and 2.0). Fully integrated with HID® on the Desktop™ applications. ROHS certificate.

Intelligent contactless cards module (RFID 13,56 MHz y 125 KHz) and HID® Mobile Access™ (NFC y BLE) compatible with Android™ and iOS™, with USB connection (1.1 y 2.0) and UART for integration with consumer devices. Completely integrated with HID® applications. CCID Certificate. Keyboard emulation output. Different optional installation accessories and DTK available. With plastic cover. MOQ=10 units.

The OMNIKEY™ 5x27CK readers provide a solution for CCID and keyboard wedge applications. CCID support allows reader installation without the need to install or maintain drivers, eliminating complex software lifecycle management issues in the field and accelerating the time to market. These devices are commonly used in printers, copiers, vending machines and access control systems. With the keyboard wedge functionality, users of OMNIKEY™ 5x27CK readers can retrieve data from a card that is presented to the reader and directly input the card data into an application using keystroke emulation. This eliminates the need for customers to manually enter the card data into an application. The Developers Center extends access to HID® Global's broad developer community while also providing access to a comprehensive set of tools and documentation. These resources facilitate fast and easy integration of the OMNIKEY™ 5x27CK-Mini or desktop reader into CCID and keyboard wedge solutions, enabling developers to become part of the Genuine HID® Technology™ ecosystem.

Intelligent contactless cards module (RFID 13,56 MHz y 125 KHz) and HID® Mobile Access™ (NFC y BLE) compatible with Android™ and iOS™, with USB connection (1.1 y 2.0) and UART for integration with consumer devices. Completely integrated with HID® applications. CCID Certificate. Keyboard emulation output. Different optional installation accessories and DTK available. MOQ=20 units (in mults of 20).