English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 17666
    FERMAX® DUOX™ Camera Interface [9444]
    FERMAX® DUOX™ Camera Interface
    Ref.: 9444
    The Duox Camera Interface is a device that allows analog composite video CCTV cameras to be integrated into a Duox installation. Transforms the analog composite video signal (1 Vpp, 75 ohm) from a camera (PAL / NTSC) into a Duox signal that connects directly to the Duox bus. An interface will be required for each camera installed in the Duox installation. Each camera must be powered externally with its additional feeder. The interface will be powered directly from the Duox bus.
    V.A.T. included
    Consult
    FERMAX® DUOX™ Elevator Control Unit [9443]
    FERMAX® DUOX™ Elevator Control Unit
    Ref.: 9443
    The DUOX elevator control unit is a module that is used to provide elevator control service to the DUOX installation, that is, that visitors can access only the floor corresponding to the home that has opened the door. It is an interface between DUOX and MDS, the MDS Central Unit taking care of the elevator control functionality, together with the relay decoders. Connects to DUOX bus, MDS Board bus and MDS Decoder bus.
    V.A.T. included
    Consult
    FERMAX® DUOX™ Filter [3244]
    FERMAX® DUOX™ Filter
    Ref.: 3244
    DIN-4 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall. The source cannot be connected directly to the bus, given the characteristics of the DUOX System, since the power and data go through the same wires. This requires the connection module. The Feeder Connections Module must be connected directly to the bus with the shortest possible cable distance. This module prevents the power supply from disturbing the operation of the rest of the signals that circulate through the system and it will also be the one that allows connecting more sources if the system requires it. Input voltage: 18 VDC.
    V.A.T. included
    Consult
    FERMAX® DUOX™ iLOFT Telephone [3430]
    FERMAX® DUOX™ iLOFT Telephone
    Ref.: 3430
    The iLOFT telephone is a compact and extra flat door station that works in hands-free conversation mode with the entrance panel. It can also be configured in Push-To-Talk mode if necessary in very noisy environments. Its DUOX digital audio technology (2-wire non-polarized) ensures high-quality hands-free communication free of interference. Both the call volume and the conversation volume are adjusted by means of a wheel control in a very intuitive way.
    V.A.T. included
    Consult
    FERMAX® DUOX™ Line Adapter [3255]
    FERMAX® DUOX™ Line Adapter
    Ref.: 3255
    In DUOX installations it is necessary to install a line adapter device. Its function is the adaptation of the transmission line. It has a bridge to be able to carry out different adaptations according to the type of installation. Small in size, they can be installed in electrical registers. They can be screwed directly to the wall.
    V.A.T. included
    Consult
    FERMAX® DUOX™ LOFT Basic Plus Telephone [3421]
    FERMAX® DUOX™ LOFT Basic Plus Telephone
    Ref.: 3421
    Audio terminal. Installed in homes, it allows communication with the entrance panel and door opening. A new concept of home phone. An integrated design, in line with new trends and lifestyles, simple and functional that combines quality and design. Its purity of lines, its technology and benefits make this equipment an elegant and perfect element for any home.
    V.A.T. included
    Consult
    FERMAX® DUOX™ LOFT Extra Telephone [3422]
    FERMAX® DUOX™ LOFT Extra Telephone
    Ref.: 3422
    Audio terminal. Installed in homes, it allows communication with the entrance panel and door opening. A new concept of home phone. An integrated design, in line with new trends and lifestyles, simple and functional that combines quality and design. Its purity of lines, its technology and benefits make this equipment an elegant and perfect element for any home.
    V.A.T. included
    Consult
    FERMAX® DUOX™ Regenerator with 1 Output [3256]
    FERMAX® DUOX™ Regenerator with 1 Output
    Ref.: 3256
    Device that allows to regenerate the Duox signal in both directions, isolate sections of the installation, as well as extend distances and terminal capacity. Input and outputs are isolated, against short circuits, load and signal reflections. It has 1 Entrance and 1 Exit. The sections on both sides require their own power set (“filter + source”): the 1-output regenerator amplifies the data, but does not let the power through. Recommended use: extend distances, increase number of terminals, isolate segments of the installation, isolate cable section changes in the same segment. Small in size, they can be installed in electrical registers. They can be screwed directly to the wall.
    V.A.T. included
    Consult
    FERMAX® DUOX™ Regenerator with 2 Outputs [3253]
    FERMAX® DUOX™ Regenerator with 2 Outputs
    Ref.: 3253
    The DUOX trunk shunt is an intermediate device in a DUOX installation whose main functions are to isolate, distribute, regenerate and feed trunks in the installation. If a fault occurs in a trunk or in the input, due to a short circuit in the bus, or due to a data failure, it does not affect each other. Likewise, it is not strictly necessary to put a power supply at the outputs of each of the trunks since the device is capable of supplying said trunks (respecting the maximum loads).
    V.A.T. included
    Consult
    FERMAX® DUOX™ Relay Module [3257]
    FERMAX® DUOX™ Relay Module
    Ref.: 3257
    The DUOX Relay allows a potential-free relay to be available in DUOX installations, with several configurable modes of operation and activation: (1) Activation of the relay by means of commands generated from the house terminals, boards or guard units. (2) External activation by push buttons, additional external switches, etc ... The DUOX Relay can be installed anywhere on the duox bus. It is possible to install one or more relays: per apartment, block or installation. Input voltage: 18 VDC.
    V.A.T. included
    Consult
    FERMAX® Electronic Call Multiplier [2340]
    FERMAX® Electronic Call Multiplier
    Ref.: 2340
    Increase the level of call volume in facilities with a large number of telephones or monitors in the same home (more than 5).
    V.A.T. included
    Consult
    FERMAX® Electronic Doorphone Changer [8811]
    FERMAX® Electronic Doorphone Changer
    Ref.: 8811
    Changing tables are required in installations with more than one access. Its function is to connect the telephone or monitor of the house with the plate from where the call is being made. Maximum 7 accesses. 1 changing table is required for each door entry / video door entry access. Only in case of 2 accesses 1 changer is needed. There are two models that depend on the type of additional access: doorman or video door entry. DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.
    V.A.T. included
    Consult
    FERMAX® EM 125 KHz Card with MagStripe [23361]
    FERMAX® EM 125 KHz Card with MagStripe
    Ref.: 23361
    They are user identification devices with unique identifiers. Each device is marked with the identifier to register it in the system. The identifier is encrypted to prevent copies from being made with the intention of fraudulent use. Does not require maintenance or batteries. Includes magnetic stripe for additional function.
    V.A.T. included
    Consult
    FERMAX® EM 125 KHz Card without MagStripe [2336]
    FERMAX® EM 125 KHz Card without MagStripe
    Ref.: 2336
    They are user identification devices. Each device is marked with the identifier to register it in the system. Does not require maintenance or batteries. Credit card format. White PVC material. They can be personalized with logos and user photos using a sublimation printer.
    V.A.T. included
    Consult
    FERMAX® EM 125 KHz Keyfob [4515]
    FERMAX® EM 125 KHz Keyfob
    Ref.: 4515
    They are user identification devices. Each device is marked with the identifier to register it in the system. Does not require maintenance or batteries.
    V.A.T. included
    Consult
    FERMAX® EM 125KHz RFID Readers - USB [5239]
    FERMAX® EM 125KHz RFID Readers - USB
    Ref.: 5239
    USB desktop reader for reading both EM 125KHz cards and key fobs. It facilitates the management of registrations of this type of identifiers through a PC, without having to go to the installation reader. Once the drivers are installed with the reader connected, the corresponding registration management software must be run (AC+, MDS, LYNX, etc ...). After clicking in the card registration field, press F8 to display the card code that we have just presented to the reader.
    V.A.T. included
    Consult
    FERMAX® Feeder for Audio CITY™ 2-Wire Kit - DIN6 [1107]
    FERMAX® Feeder for Audio CITY™ 2-Wire Kit - DIN6
    Ref.: 1107
    230VAC FERMAX® Power Supply for 2 Wire Audio CITY ™ Kit. DIN6 rail installation.
    V.A.T. included
    Consult
    FERMAX® Flush Push Button [5287]
    FERMAX® Flush Push Button
    Ref.: 5287
    Door release buttons are the most common and the most frequently used in the access control systems. Mainly used by public institutions, banks, large, small and medium-sized enterprises, stores and residences. Stainless steel Panel with Elegant Style. 500.000 Cycles tests. Three Contact Output. Suitable for all kinds of Locks Releases.
    V.A.T. included
    Consult
    FERMAX® FPAC-MAX + RFID MIFARE™ Biometric Reader [5225]
    FERMAX® FPAC-MAX + RFID MIFARE™ Biometric Reader
    Ref.: 5225
    The FPAC-MAX is a biometric fingerprint reader equipped with a high-quality optical sensor and ISO / IEC 14443A and MIFARE® proximity reader. Users can be recognized by comparing their fingerprint with those registered in the reader's memory (1: N mode) or with those registered on the MIFARE® card (1: 1 mode). The reader can store up to 1,900 fingerprints and is still able to recognize users relatively quickly. If the 1: 1 mode is applied, the third level of recognition (the highest) is applied and maximum privacy is achieved.
    V.A.T. included
    Consult
    FERMAX® iLOFT™ DUOX™ 1/L Kit (CITY™ Entry Panel and iLOFT™ Monitor) [5077]
    FERMAX® iLOFT™ DUOX™ 1/L Kit (CITY™ Entry Panel and iLOFT™ Monitor)
    Ref.: 5077
    CITY-DUOX Doorphone Kits incorporate the latest digital technology from FERMAX. DUOX is the new digital system that represents a technological and innovative leap in the market. It only requires two non-polarized cables for: power, audio and data transmission. Includes: 70704.- CITY DUOX 1/L plate. S1 plate: 130x128mm. 8948.- S1 kit embedding box: 115x114x45mm. 3430.- iLOFT DUOX telephone. 4810.- 18VDC/1,5A-12VAC/1,5A power supply. DIN10. 3244.- DUOX filter.
    V.A.T. included
    Consult
    FERMAX® iLOFT™ DUOX™ 1/L Kit (MARINE™ Entry Panel and iLOFT™ Monitor) [5076]
    FERMAX® iLOFT™ DUOX™ 1/L Kit (MARINE™ Entry Panel and iLOFT™ Monitor)
    Ref.: 5076
    CITY-DUOX Doorphone Kits incorporate the latest digital technology from FERMAX. DUOX is the new digital system that represents a technological and innovative leap in the market. It only requires two non-polarized cables for: power, audio and data transmission. Includes: 54334.- MARINE DUOX 1/L plate. ST1 plate: 150x180mm. 4641.- Marine ST1 embedding box: 130x160x55mm. 3430.- iLOFT DUOX telephone. 4810.- 18VDC/1,5A-12VAC/1,5A power supply. DIN10. 3244.- DUOX filter.
    V.A.T. included
    Consult
    FERMAX® Ingenium™ BF2 PSU - 12VDC 0.5Amp (DIN-2) [9893]
    FERMAX® Ingenium™ BF2 PSU - 12VDC 0.5Amp (DIN-2)
    Ref.: 9893
    BUSing power supply capable of delivering 500 mA. It allows supplying power to the rest of the equipment connected to the BUS.
    V.A.T. included
    Consult
    FERMAX® Ingenium™ BF22 PSU - 12VDC 1Amp (DIN-4) [9836]
    FERMAX® Ingenium™ BF22 PSU - 12VDC 1Amp (DIN-4)
    Ref.: 9836
    BUSing power supply capable of delivering 1000 mA. It allows supplying power to the rest of the equipment connected to the BUS.
    V.A.T. included
    Consult
    FERMAX® Ingenium™ BF2B PSU - 12VDC 0.5Amp with Backup [7666]
    FERMAX® Ingenium™ BF2B PSU - 12VDC 0.5Amp with Backup
    Ref.: 7666
    500mA BUSing power supply with external battery connection (not included).
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved