Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.

Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.

It can be installed next to plates with keypad in order to write down the name corresponding to each of the house codes. The directory panel must be of the same series as the door station / video door entry panel. Includes some light bulbs.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.

Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. Marine flush mounting boxes are metal. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers (ref. 2289), for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.

To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 55mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.

Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number. It incorporates a COLOR camera with integrated lighting and a regulation system for focusing the camera.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number. It incorporates a COLOR camera with integrated lighting and a regulation system for focusing the camera.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number. It incorporates a COLOR camera with integrated lighting and a regulation system for focusing the camera.

Marine is the line of anti-vandal plates made of 2.5 mm thick stainless steel. Straight lines that highlight the quality of the steel. State-of-the-art technology and resistance that can cope with even the most corrosive, humid and dangerous environments. The anti-vandalism call buttons, made of stainless steel and with an anti-lock system, resist any impact. The buttons include a card holder to house a label with the name of the home owner and the door number. It incorporates a COLOR camera with integrated lighting and a regulation system for focusing the camera.

Changer module for MDS CITY / DIRECT installations with more than one video access. Its function is to connect the monitor of the house with the plate from where the call is being made. 1 changer is required for each additional video door entry access.

For transmission of MDS signals (audio, video and data) by means of fiber optic cable (single-mode fiber with FC / PC connectors). Includes Tx, Rx and PSUs.

Spare parts display module to be incorporated into CityClassic panels and MDS Digital system. The digital display module allows the search and visualization of the list of neighbors (electronic directory) by means of the navigation buttons (arrow keys), in addition to informing about the communication status. The house call can be made in two ways: by entering the corresponding code assigned to the house + the 'bell' key. By searching the user's electronic directory (navigation buttons) and once found by pressing the 'bell' key. The navigation buttons also allow you to move through the programming menu. CityClassic is the line of 'continuous profile' entrance panels for buildings. The PLATES are made of anodized aluminum, highly resistant to the elements and to climatic changes. The design of the plate stands out due to its convex curved profile. A cellular rubber sealing gasket that is included, ensures a perfect connection of the plate to the wall, to avoid water leaks.

To regenerate the digital signal of the BUS of boards or decoders that is transmitted by the twisted pair of the installation. Required: (1) When the BUS length is greater than 1200m: One repeater every 1200m. (2) When there are more than 120 Decoders.

The Remote Management IP Terminal allows the connection between the PC and the installation through the ethernet network and the Internet, thus being able to remotely configure, control and manage the installations, avoiding additional wiring. The Remote Management Terminal is in charge of converting the TCP / IP packets into serial data, so that the installation is able to interpret them in the same way as if it were connected directly to the PC.

The MEET 4-relay relay module uses standard Modbus protocol and allows to extend the door opening activation function to 4 additional doors. It works as an auxiliary RS-485 device for entrance panel 1 of each block.

The CONSERJERIA has a 9'' (800x800) resistive screen with an aluminum profile. Audio and Camera. The graphical interface makes the functions accessible and intuitive for the operator or concierge. Arm or hands free operation. SIP Peer to Peer protocol. Low consumption. Visual and acoustic alarm notification. Compatible with an associated RTSP IP camera for sending video to the home. Audio / video answering machine mode in case the call is not answered. Modular Android Platform.