Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages. Up to 100 user codes (Code length from 4 to 6 digits).

Access control equipment with memokey keypad. Indicated for offices, offices, garages ... It allows the opening of a door or access from the keypad by entering a PIN code. Supports up to 100 different users / codes. It allows activating another device from the keypad: 2nd door, alarm, lights, etc ... Includes: Cityline memokey reader, Ref. 6991. Power supply, Ref. 4800.

The MEMOKEY RESISTANT KIT, for autonomous vandal-proof access control by keypad and proximity, allows the management of up to 600 users. It includes an IP66 / IK9 keypad with a slimline, slim profile integrated controller (ref. 5293), 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12VAC / 1A power supply (ref. 4802). The access code is entered by dialing 4-6 digits + #. Multi-card / PIN type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present their valid card and until the two additional cards are passed (example of the guards), the door will not open. The kit can be expanded with a second keypad (ref. 5293) or with a proximity reader WG26 (ref. 5296), adding an additional 12Vdc source (ref. 4813): (1) The keypad can work as INTERLOCK (opening one door with automatic locking of another). (2) The reader (ref.5296) will act on the same door.

Access control module, to be incorporated into door entry / video entry panels. Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages. Up to 100 user codes.

USB desktop reader for reading both MIFARE 13.56MHz cards and key fobs. It facilitates the management of registrations of this type of identifiers through a PC, without having to go to the installation reader. Once the drivers are installed with the reader connected, the corresponding registration management software must be run (AC+, MDS, LYNX, etc ...). After clicking in the card registration field, press F8 to display the card code that we have just presented to the reader.

RFID MIFARE 1K 13.56Mhz proximity card. User identification device. Each device is marked with the identifier to register it in the system manually. Does not require maintenance or batteries.

RFID MIFARE proximity keyfob at 13.56Mhz 1K. User identification device. Each device is marked with the identifier to register it in the system manually. Does not require maintenance or batteries.

Wiegand controllers allow the access control installation to be provided with anti-sabotage security by incorporating the door opening mechanism and the exit button connection. The controller includes an Infrared programming keyboard for programming and maintenance of the installation. User capacity: 1,000. Access modes: Card, Card or Keyboard (PIN), card + keyboard (PIN). Power: 12Vdc (9-24VDC).

VEO KITS include all the necessary materials for an installation: Cityline entrance panel, a sure value, the result of combining classic aesthetics, robustness and reliability; VEO monitor and power supply. The board included in the kit includes the OneToOne information module. This kit includes: 7389.- City Color DUOX 1L plate with OneToOne informative screen and flush mounting box (ref. 8949). S4 plate: 130x199mm. S4 embedding box: 115x185x45mm. 9405.- VEO DUOX monitor with inductive loop. 9406.- DUOX connector. 4810.- 18VDC/1,5A-12VAC/1,5A power supply. DIN10. 3244.- DUOX filter. 3255.- Line adapter.

Interface that allows the local connection between the PC (serial port) and the installation, thus being able to configure, control and manage the installations. Used for management and maintenance of facilities that have the PC permanently connected. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. PC connection: Serial port (RS-232), max 30 meters (including 3 meter cable). Installation connection: RS-485 (twisted pair), max 1000 meters.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-4 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

FERMAX® power supply for 2-wire 230VAC audio kit. DIN6.

Power supply designed for WAY-FI Kit. It supplies power for outdoor station and indoor entry monitor. Universal AC input/full range. Multi protection: short circuit, overload, over voltage. DIN-8 rail format for easy installation inside an electrical equipment box, or can be screwed directly onto the wall. Input Voltage: 100~240VAC. Input Frequency: 50~60Hz. Output Voltage: DC 26V. Output Current: 2A. Operating Temperature: -10ºC ~ 50ºC. SW Port Input Voltage: Max.230Vac, 0.6A. Dimensions: 140x90x60mm.

Power supply designed for WAY Kit 2 wire non polarized system. It supplies power for outdoor station and indoor entry monitor. Universal AC input/full range. Multi protection: short circuit, overload, over voltage. DIN-8 rail format for easy installation inside an electrical equipment box, or can be screwed directly onto the wall. Input Voltage: 100~240VAC. Input Frequency: 50~60Hz. Output Voltage: DC 26V. Output Current: 2A. Operating Temperature: -10ºC ~ 50ºC. SW Port Input Voltage: Max.230Vac, 0.6A. Dimensions: 140x90x60mm.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. Necessary when there are automatic changers. In these cases it replaces the feeder ref. 4802. 12Vac / 1.5A and 12Vdc / 0.5A outputs. DIN6.

Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.

Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.

Vandal resistant keypad with integrated proximity, narrow profile and small dimensions. It allows to work in autonomous or centralized mode. Maximum capacity of up to 600 users. The keypad has a door sensor input (can be enabled or disabled). If activated and the door is opened without prior authorization, an alarm will be triggered until a valid identifier is presented and the door is closed. It will also trigger an alarm if the door remains open for more than 1 minute after valid access. The keypad is supplied with two master cards that allow registering or canceling cards or key chains, not codes. The codes are registered through the keypad itself. Centralized mode: Wiegand 26 / 8bits. IP66.

The RESISTANT PROXIMITY KIT includes a vandal-proof proximity reader, with a narrow profile and small dimensions, allowing it to be installed on narrow profile doors. It allows managing up to 1,000 users thanks to the MINI autonomous external controller (ref. 5276). This controller includes two MASTERS cards (HIGH / LOW) and an infrared IR keypad for card and parameter programming, 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12Vac / 1A power supply (ref. 4802). The controller allows up to 2 different types of access when installing a proximity reader. Card only; Multi-card. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present their valid card and until the two additional cards are passed (example of the guards), the door will not open.

Anti-vandalism proximity reader, narrow profile and small dimensions. It allows to work in autonomous or centralized mode, depending on the Wiegand 26 controller to which it is connected. Maximum capacity of up to 1,000 users. IP66.