Standard HID Holographic Surface Foil. Per stamp and side. Requires custom tool (HOLO-TOOL) for first time order. Adder to card price. Minimum order quantity is 50.000 units.

Standard HID Holographic Surface Foil. Per stamp and side. Requires custom tool (HOLO-TOOL) for first time order. Adder to card price. Minimum order quantity is 5.000 units.

Standard red surface base for NRX series analog via radio detectors and sounders, equipped with anti-extraction magnet. Red color.

Standard power emitting device with wired power for operation with OSI-10 and OSI-90. Requires 12/24VDC power from a power source conforming to EN54/4. Compatible with OSI-10 or OSI-90.

Standard power emitting device with battery power for operation with OSI-10 and OSI-90. Compatible with OSI-10 or OSI-90. Approximately 5 years of useful life.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of explosive gases with catalytic technology (pellistor), for a detection range of 0 to 100% L.I.E. and resistant to silicone vapors. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Especially suitable for use in laboratories or compartmentalized areas that, in addition to local use, need control and perform maneuvers and report their status remotely.

Autonomous programmable detector designed for the detection of explosive gases with catalytic technology (pellistor), for a detection range of 0 to 100% L.I.E. and resistant to silicone vapors. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Especially suitable for use in laboratories or compartmentalized areas that, in addition to local use, need control and perform maneuvers and report their status remotely.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Independent detector by catalytic technology for the detection of butane-propane, methane- natural gas and hydrogen with relay. Independent functioning: without connection to any central. Allows the automatic selection of the gas to detect, between all the available gases, through a protocol established with a jumper. Detection range from 0 to 100% L.I.E. Optical state and sensor breakout indicator. 1 alarm relay output programmable between 2 levels (20% LIE / 50% LIE), instant/retarded disconnection, programmation retard of connection and initial state of the relay in repose. Power 10V to 30V DC. Calibrated in factory with span gas. No need to recalibrate in the installation. Easy verification and maintenance operations by a single worker. Resistant to silicone vapours (HDMS).