Independent detector by catalytic technology for the detection of explosive gases with relay. Independent functioning: does not require central. Allows the automatic selection of the gas to detect , between any of the available gases, through a protocol established with a jumper. Detection range from 0 to 100% L.I.E. Opticas state and sensor breakout indicator. 1 alarm relay output programmable between 2 levels (20% LIE / 50% LIE), instant/retarded disconnection, programmation retard of connection and initial state of the relay in repose. Power 10V to 30V DC. Sensor and compensator in independent encapsulation to provide a bigger linearity and stability. Detector with sintered filter. Calibrated in factory withspan gas. No need to recalibrate in the installation. Easy verification and maintenance operations by a single worker.

Independent detector by catalytic technology for the detection of explosive gases with relay. Independent functioning: does not require central. Allows the automatic selection of the gas to detect , between any of the available gases, through a protocol established with a jumper. Detection range from 0 to 100% L.I.E. Opticas state and sensor breakout indicator. 1 alarm relay output programmable between 2 levels (20% LIE / 50% LIE), instant/retarded disconnection, programmation retard of connection and initial state of the relay in repose. Power 10V to 30V DC. Sensor and compensator in independent encapsulation to provide a bigger linearity and stability. Detector with sintered filter. Calibrated in factory withspan gas. No need to recalibrate in the installation. Easy verification and maintenance operations by a single worker.

Independent catalytic technology detector for the detection of explosive gases. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Allows to programe the type of gas, prealarm level, alarm level, initial state of the manoeuvre output, type of rearming manual or automatic, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout. Calibrated in factory with span gas. No need to recalibrate in the initial set up. Resistant to silicone vapours (HDMS). Independent version RS485: Specially recommended for its use in laboratories or compartimentalized areas which, apart from its local use, need a control and making manoeuvres and remotely informing about its state. Up to 8 units per area can be connected, maintaining its compatibility with the rest of the gases.

Independent catalytic technology detector for the detection of explosive gases. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Allows to programe the type of gas, prealarm level, alarm level, initial state of the manoeuvre output, type of rearming manual or automatic, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout. Calibrated in factory with span gas. No need to recalibrate in the initial set up. Resistant to silicone vapours (HDMS). Independent version RS485: Specially recommended for its use in laboratories or compartimentalized areas which, apart from its local use, need a control and making manoeuvres and remotely informing about its state. Up to 8 units per area can be connected, maintaining its compatibility with the rest of the gases.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Stentofon™ AlphaCom Integration Module for a site. Enables bi-directional event integration between Stentofon™ AlphaCom and an AVIGILON™ Control Center site.

High parking block 600 x 150 x 120 mm

Rubber corner with straight corner. Color: Black with reflective yellow stripes. Measurements: 800 x 100 + 100 x 10 mm. Weight: 1.3 kg

Strobe pilot in shock resistant polycarbonate, to be installed indoors or outdoors. Polycarbonate glass.

Supervised power supply. Mounted in a box and with battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Working temperature: -10 ° C to 40 ° C. Requires 2 reference batteries BS130N or BS131N (not included). Dimensions: 400 x 420 x 80 mm. Amperage 10.0A + 0.7A for battery charging.

Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS127N reference (Not included). Dimensions: 275 x 330 x 80mm. Amperage 1,2A+0,3A for battery charging.

Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS131N reference (Not included). Dimensions: 400 x 420x 80mm. Amperage 2,0A+0,7A for battery charging.

Monitored power supply unit. Mounted in a box and with a battery charger. With CPR and EN54-4 certificates. Overload protection. Fault relay output. Battery discharge protection. Operation temperature: -10ºC to 40ºC, Requires 2 batteries BS131N reference (Not included). Dimensions: 400 x 420x 80mm. Amperage 5,0A+0,85A for battery charging.

Suction Cups for WSHLDMT - Kit contains (200) cups. Windshield Mount Kits.

The F 35 photocell is a supervised optoelectronic device, reflecting on a retro-reflecting mirror, which uses polarized infrared light to protect large access points, since it is capable of detecting an interruption of the light beam at a distance of up to 12 meters with the mirror. diameter 80 mm.

High sensitivity electret microphone mounted on threaded brass cylinder, for flush mounting as an ambient sound pick-up microphone, and preamplifier with selectable sensitivity (0, -30, -60 dB) symmetric signal output in separate metal enclosure. Includes power supply.

High sensitivity electret microphone and preamplifier with selectable sensitivity symmetric signal output (0, -30, -60 dB) in plastic case. Includes power supply.