English
Español
  • Search
    • +34 902930427

    0.00 €

    Analog Intercommunication

    Products 707
    FERMAX® CITY™ S8 Single Vizor [8407]
    FERMAX® CITY™ S8 Single Vizor
    Ref.: 8407
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x393 mm (width-heigth).
    V.A.T. included
    123.38 €
    FERMAX® CITY™ S7 Single Vizor [8406]
    FERMAX® CITY™ S7 Single Vizor
    Ref.: 8406
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x345 mm (width-heigth).
    V.A.T. included
    94.63 €
    FERMAX® CITY™ S6 Single Vizor [8405]
    FERMAX® CITY™ S6 Single Vizor
    Ref.: 8405
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x300 mm (width-heigth).
    V.A.T. included
    80.26 €
    FERMAX® CITY™ S5 Single Vizor [8404]
    FERMAX® CITY™ S5 Single Vizor
    Ref.: 8404
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x250 mm (width-heigth).
    V.A.T. included
    64.69 €
    FERMAX® CITY™ S4 Single Vizor [8403]
    FERMAX® CITY™ S4 Single Vizor
    Ref.: 8403
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x203 mm (width-heigth).
    V.A.T. included
    57.50 €
    FERMAX® CITY™ S3 Single Vizor [8402]
    FERMAX® CITY™ S3 Single Vizor
    Ref.: 8402
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x180 mm (width-heigth).
    V.A.T. included
    57.50 €
    FERMAX® CITY™ S2 Single Vizor [8401]
    FERMAX® CITY™ S2 Single Vizor
    Ref.: 8401
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x155 mm (width-heigth).
    V.A.T. included
    57.50 €
    FERMAX® CITY™ S1 Single Vizor [8400]
    FERMAX® CITY™ S1 Single Vizor
    Ref.: 8400
    Very useful to protect the outer plate, when due to its location it can be affected by external agents such as rain, snow, etc ... It is advisable to seal the visor to the wall with silicone on the top and sides as additional protection. Only for embedding boxes. Remember that to fit the plates perfectly, a set of spacers must be used every two plates that are installed between their embedding boxes. As it is possible to combine two or more plates, as long as they are from the same series, there are 9 series of visors for single, double or triple plates, select the visor of the necessary series, depending on the case. Measurements: 135x130 mm (width-heigth).
    V.A.T. included
    49.11 €
    FERMAX® CITY™ S9 Simple Frame [8259]
    FERMAX® CITY™ S9 Simple Frame
    Ref.: 8259
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 495(V)mm.
    V.A.T. included
    185.67 €
    FERMAX® CITY™ S8 Simple Frame [8258]
    FERMAX® CITY™ S8 Simple Frame
    Ref.: 8258
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    154.53 €
    FERMAX® CITY™ S7 Simple Frame [8257]
    FERMAX® CITY™ S7 Simple Frame
    Ref.: 8257
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    154.53 €
    FERMAX® CITY™ S6 Simple Frame [8256]
    FERMAX® CITY™ S6 Simple Frame
    Ref.: 8256
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 450(V)mm.
    V.A.T. included
    154.53 €
    FERMAX® CITY™ S5 Simple Frame [8255]
    FERMAX® CITY™ S5 Simple Frame
    Ref.: 8255
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    138.96 €
    FERMAX® CITY™ S4 Simple Frame [8254]
    FERMAX® CITY™ S4 Simple Frame
    Ref.: 8254
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    138.96 €
    FERMAX® CITY™ S3 Simple Frame [8253]
    FERMAX® CITY™ S3 Simple Frame
    Ref.: 8253
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 375(V)mm.
    V.A.T. included
    138.96 €
    FERMAX® CITY™ S2 Simple Frame [8252]
    FERMAX® CITY™ S2 Simple Frame
    Ref.: 8252
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 310(V)mm.
    V.A.T. included
    Consult
    FERMAX® CITY™ S1 Simple Frame [8251]
    FERMAX® CITY™ S1 Simple Frame
    Ref.: 8251
    The trim frames allow you to replace old door entry and video door entry panels with the new models from the CITYLINE and CITY CLASSIC series, covering the gap and integrating perfectly with the finish of these panels. Dimensions:225(H) x 310(V)mm.
    V.A.T. included
    Consult
    CITY™ DUOX / VDS / BUS2 5-Wire Connection Cable [2542]
    CITY™ DUOX / VDS / BUS2 5-Wire Connection Cable
    Ref.: 2542
    SKYLINE™ DUOX/VDS 5-wire connection cable for module interconnection.
    V.A.T. included
    14.37 €
    FERMAX® CITY™ S6 VWW Entry Panel Directory [7318]
    FERMAX® CITY™ S6 VWW Entry Panel Directory
    Ref.: 7318
    It can be installed next to plates with keyboard in order to write down the name corresponding to each of the house codes. The Board of Directors must be of the same series as the door station / video door entry panel. Includes some light bulbs. Plate measurements: 130x294 mm (width-height).
    V.A.T. included
    Consult
    FERMAX® CITY™ S7 WWW Entry Panel Directory [7310]
    FERMAX® CITY™ S7 WWW Entry Panel Directory
    Ref.: 7310
    It can be installed next to plates with keyboard in order to write down the name corresponding to each of the house codes. The Board of Directors must be of the same series as the door station / video door entry panel. Includes some light bulbs. Plate measurements: 130x341 mm (width-height).
    V.A.T. included
    Consult
    FERMAX® CITY™ S5 WW Entry Panel Directory [7309]
    FERMAX® CITY™ S5 WW Entry Panel Directory
    Ref.: 7309
    It can be installed next to plates with keyboard in order to write down the name corresponding to each of the house codes. The Board of Directors must be of the same series as the door station / video door entry panel. Includes some light bulbs. Plate measurements: 130x246 mm (width-height).
    V.A.T. included
    Consult
    Surface Box for FERMAX® CITY™ Classic S9 Entry Panel [8984]
    Surface Box for FERMAX® CITY™ Classic S9 Entry Panel
    Ref.: 8984
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set.
    V.A.T. included
    49.11 €
    FERMAX® CITY™ S9 Type Flush Mount Box [8982]
    FERMAX® CITY™ S9 Type Flush Mount Box
    Ref.: 8982
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. The embedding boxes are made of aluminum and zamak. They have hinges that can be folded in any direction, which allow the plate to be held while wiring. They have circular indentations in the bottom of the box, which are punctured with a light tap or pressure, thus allowing the cables to pass through. In the event that several plates are combined, always from the same series, it is necessary to use a set of spacers for a perfect coupling. One set is required for each additional plate that is installed between the flush mounting boxes.
    V.A.T. included
    49.11 €
    Surface Box for FERMAX® CITY™ Classic S8 Entry Panel [8958]
    Surface Box for FERMAX® CITY™ Classic S8 Entry Panel
    Ref.: 8958
    To carry out the installation of a plate it is necessary to place a box on the wall or wall where we will later fix the plate. In those cases where a hole is not desired or cannot be made in the wall for the embedding box (marble, stone facades, etc.), it is recommended to use a surface box. The depth is only 33mm., And its design integrates perfectly with the aesthetics of the plate. In case of combining several plates, it is not required to use the separator set. Measurements: 130x389x33 mm (horizontal-vertical-depth).
    V.A.T. included
    44.32 €
    SYSAWAY© 2024 All rights reserved