English
Español
  • Search
  • 0.00 €

    Detection Devices

    Products 863
    HONEYWELL™ IS3012 Motion Detector - G2 [IS3012]
    HONEYWELL™ IS3012 Motion Detector - G2
    Ref.: IS3012
    IR Detector. Fresnel optic. Anti-pets. Range 12 x 17 m. Selectable pet immunity. Double temperature compensation. Opening tamper and take off. Easy opening and set up. Intelligent walking test system. Voltage: 9.0 - 15 V CC; traditionaly 7 mA. Dimensions: 9.8 x 5.7 x 4.35 cm. Operating temperature from -10°C to 55°C. Relative humidity from 5 to 93% (Without condensation). Security grade 2 certified.
    V.A.T. included
    28.46 €
    RISCO™ Mounting Ball Joint with TAMPER [RA51T000000A]
    RISCO™ Mounting Ball Joint with TAMPER
    Ref.: RA51T000000A
    Bracket for wall and ceiling for BWARE™ detectors.
    V.A.T. included
    15.42 €
    RISCO™ VUpoint™ 4MPx 2.8mm with IR 30m IP Minidome [RVCM72P2100A]
    RISCO™ VUpoint™ 4MPx 2.8mm with IR 30m IP Minidome
    Ref.: RVCM72P2100A
    Sensor: 1/3 4 megapixel CMOS. Infrared capability: Distance of 30 meters. Focal length: 2.8mm wide angle. Backlight management: WDR 120 dB. Firmware update via camera web interface. SD card slot. 12V DC / POE power supply (not included). Consumption: maximum 5.0 W. Operating conditions -40 ° C to 55 ° C. Dimensions: Diameter 70 x Length 162 mm. Degree of protection IP67. Requires RISCO™ NVR.
    V.A.T. included
    250.20 €
    RISCO™ BWare™ QUAD Detector with Antimasking [RK500Q0G300A]
    RISCO™ BWare™ QUAD Detector with Antimasking
    Ref.: RK500Q0G300A
    Passive infrared detector QUAD, reach 15 meters and antimasking. Internal protection of the PCB. Simple and elegant design with a single convex lens. Anti-masking by Active IR. Opto-relays for protection against the attack of large magnets. Tampers: cover and wall / corner. Corridor lenses (optional). BWare™ Wall / Ceiling Bracket RA51T (optional). Interior installation Power: 9 to 16 VDC. Maximum consumption: 41 mA. Dimensions: 127.6 x 64.2 x 46.6 mm.
    V.A.T. included
    94.86 €
    UTC™ Support in L for Magnetic [DC1912]
    UTC™ Support in L for Magnetic
    Ref.: DC1912
    L support for contacts: DC110, DC115 and DC118.
    V.A.T. included
    Consult
    UTC™ Aritech™ DC121 Magnetic Contact - G2 [DC121]
    UTC™ Aritech™ DC121 Magnetic Contact - G2
    Ref.: DC121
    Plastic magnetic contact for built-in assembly with magnet surface. Its provided with 4 wires cable of 2m. NC alarm and tamper contact. Maximum operational opening 12mm. Dimensions: 11 x 33 mm. Security grade 2 certified.
    V.A.T. included
    13.32 €
    UTC™ Aritech™ Recessed Magnetic Contact - White [MM110]
    UTC™ Aritech™ Recessed Magnetic Contact - White
    Ref.: MM110
    Contact, Recess Mount. Robust design. 4 Wire connection (2 m). Easy installation. Passive tamper. Fully encapsulated. ABS body. Long life Rhodium contact. Colour: White. Diameter: 8 mm. Dimensions contact / sensor: 8 x 33 mm (Ø x L). Operating gap: 15 mm (max.).
    V.A.T. included
    7.73 €
    UTC™ Aritech™ DC115 Magnetic Contact - G2 [DC115]
    UTC™ Aritech™ DC115 Magnetic Contact - G2
    Ref.: DC115
    Magnetic aluminium contact for floor and doors mounting. Provided with 2 metres of 5 wire cable. NA and NC contacts. Maximum operational opening 9~62 mm. Magnet and contact Dimensions: 76 x 12 x 35 mm. Security grade 2 certified.
    V.A.T. included
    109.25 €
    UTC™ Aritech™ DC101 (6 m) Magnetic Contact - G2 [DC101S60]
    UTC™ Aritech™ DC101 (6 m) Magnetic Contact - G2
    Ref.: DC101S60
    Plastic magnetic contact for surface mounting. Its provided with a 4 wires 2 meters cable. NC alarm and tamper contact. Maximum operational opening of 15mm. Dimensions: 51 x 9 x 9 mm. Security grade 2 certified.
    V.A.T. included
    Consult
    Sensor Inercial HONEYWELL™ SD-3 [SD3/WH]
    Sensor Inercial HONEYWELL™ SD-3
    Ref.: SD3/WH
    The SD3/WH is a White Surface Mounted Shock Sensor in Tampered Junction Box range of mass inertia shock sensors which can be used either with the TRAPPER or with other separate analysers or those integrated into control panels. Dimensions: 50 x 28 x 17mm.
    V.A.T. included
    26.93 €
    PARADOX™ Wireless Infrared Outdoor Detector [PMD85]
    PARADOX™ Wireless Infrared Outdoor Detector
    Ref.: PMD85
    Infrared via Digital Radio Pet Immune up to 40kgs, dual filter optic, metal shield which increase the protection against RF interferences, multinivel sensivity adjustment, lens proteccted against UV rays, Operating temperature from -45ºC to +50ºC. 868 MHz frequency. SB85 label not included.
    V.A.T. included
    255.81 €
    PARADOX™ Infrared Wireless with Double Detection Element [PMD75]
    PARADOX™ Infrared Wireless with Double Detection Element
    Ref.: PMD75
    Infrared via radio double element immune to pets until 40kgs, dual optical sensor (2 Double elements opposites sensors), digital shielding algorithm, 11 x 11 meters covering with 90º viewing angle. 868 MHz frequency. Requires 3 x AAA alkaline batteries (Not included). Operating temperature from 0 °C to 50 °C.
    V.A.T. included
    123.08 €
    PARADOX™ Infrared Wireless Double Elements - G2 [PMD2P]
    PARADOX™ Infrared Wireless Double Elements - G2
    Ref.: PMD2P
    Infrared via radio double element immune to pets until 18kg, 11meters coverage and 15meters in central beams, with 88.5º viewing angle. 868 MHz Frequency. Grade 2 certified according to EN 50131. Requires 3 x AAA alkaline batteries (Not included).
    V.A.T. included
    84.81 €
    HONEYWELL™ IS3016M-SN Motion Detector - G2 [IS3016M-SN]
    HONEYWELL™ IS3016M-SN Motion Detector - G2
    Ref.: IS3016M-SN
    Passive IR detector, V-PLEX series. Selectable pet immunity. Range: 15 x 18 m. Digital signal processing. Double temperature compensation. Front and wall tamper. Zone input for tamper contact SMB-10T. Power supply: 8 V to 11 V in the pooling loop terminals. Dimensions: 125 x 75 x 43 mm. It complies with the EN50131-2-2: 2008 standard Grade 2 environmental class II.
    V.A.T. included
    65.24 €
    HONEYWELL™ IS3016A-SN Motion Detector - G3 [IS3016A-SN]
    HONEYWELL™ IS3016A-SN Motion Detector - G3
    Ref.: IS3016A-SN
    IR Detector. Fresnel optic. Anti-pets. Anti-masking. Range 16X22m. Selectable pet immunity. Double temperature commpensation. Opening tamper and take off. Easy opening and set up. Intelligent walikng test system. Power supply 9.0 - 15 V CC; Traditionaly 7 mA.Dimensions: 9.8 x 5.7 x 4.35 cm. Operating temperature from -10°C to 55°C. Relative humidity from 5 to 93% (Without condensation). Security grade 3 certified.
    V.A.T. included
    105.00 €
    HONEYWELL™ IS3016A Motion Detector - G3 [IS3016A]
    HONEYWELL™ IS3016A Motion Detector - G3
    Ref.: IS3016A
    IR Detector. Fresnel optic. Anti-pets. Anti-masking. Range 16X22m. Selectable pet immunity. Double temperature commpensation. Opening tamper and take off. Easy opening and set up. Intelligent walikng test system. Power supply 9.0 - 15 V CC; Traditionaly 7 mA.Dimensions: 9.8 x 5.7 x 4.35 cm. Operating temperature from -10°C to 55°C. Relative humidity from 5 to 93% (Without condensation). Security grade 3 certified.
    V.A.T. included
    53.36 €
    HONEYWELL™ IS3016 Motion Detector - G2 [IS3016]
    HONEYWELL™ IS3016 Motion Detector - G2
    Ref.: IS3016
    IR Detector. Fresnel optic. Anti-pets. Range 16 x 22 m. Selectable pet immunity. Double temperature compensation. Opening tamper and take off. Easy opening and set up. Intelligent walking test system. Voltage: 9.0 - 15 V CC; traditionaly 7 mA. Dimensions: 9.8 x 5.7 x 4.35 cm. Operating temperature from -10°C to 55°C. Relative humidity from 5 to 93% (Without condensation). Security grade 2 certified.
    V.A.T. included
    29.04 €
    OPTEX® FMX-DST Motion Detector - G2 [FMX-DST]
    OPTEX® FMX-DST Motion Detector - G2
    Ref.: FMX-DST
    Detector with PIR technology with Quad Zone logic. Double conductive mesh filter. Fresnel spherical multi-focus lens. Range of 15 x 15 m, 85° (78 PIR zones). Mounting height 2.2m to 3.0m. Adjustable sensitivity (LOW / MID / HI). Advanced logic of temperature compensation. RFI protection (10 V / m). Silent exit Power 9.5-16 VDC, consumption 8mA (normal) 11mA (alarm) to 12VDC. Dimensions 111.7 x 61.4 x 50 mm (HxWxD). GRADE 2.
    V.A.T. included
    53.36 €
    PARADOX™ PIR Motion Detector with Quadruple Element + Antipets - G2 [DG75]
    PARADOX™ PIR Motion Detector with Quadruple Element + Antipets - G2
    Ref.: DG75
    Digital sensor with two dual elements. Opposite digital dual detection. Range: 11x11 meters. Opening of 90º. Installation height: 2-2.7 meters. Animal inmunity until 40Kg. Interlaced sensor geometry (ISG). Detection speed of 0.2-3.5 ms. Relay output A form, NC,28V CC /150 mA. Sabotage: 28VDC, NC, 150 mA. Operating temperature of -20ºC-50ºC. Power supply: 11-16VDC. Consumption: 15mA maximum. Grade 2 certified according to EN 50131.
    V.A.T. included
    52.53 €
    PARADOX™ PIR Motion Detector with Quadruple Element - G2 [DG65]
    PARADOX™ PIR Motion Detector with Quadruple Element - G2
    Ref.: DG65
    Quad digital infrared detector. Opposite digital dual detection. Range: 12x12 meters. Opening of 110º. Installation height: 2.1-2.7 meters. Interlaced sensor geometry (ISG). Signal processing by automatic impulse. Automatic temperature compensation. Armoring algorithm. Double processing. Opposite dual detection. Detection speed of 0.2-3.5 ms. Relay output: Form A, NC, 28V CC /150 mA. Sabotage: 28V CC, NC, 150 mA. Operating temperature of -20ºC-50ºC. Power supply: 11-16VDC. Grade 2 certified according to EN 50131.
    V.A.T. included
    38.27 €
    SYSAWAY© 2024 All rights reserved