Double technology detector with immunity to pets up to 24 kg. Coverage 10 m / 85 °. EN50131 Grade 2 certificate. Programmable relay relay AND / OR. Self-adjusting sensitivity depending on the environmental conditions in which it is installed. Thanks to the Blue Wave technology (BWT), the detector is immune to the infrared noise of the environment. New system of 3D optics that allows a better infrared focus. Digital temperature compensation when the temperature of the environment is similar to that of the human body. Microwave in X-band, 3 different frequency values to avoid interference between detectors. End of line resistance value selectable. Power: 9 to 16 VDC. Maximum consumption: 30 mA. Dimensions: 117 x 69 x 55 mm.

El alcance de 12 x 12 metros en gran angular se complementa con una buena capacidad de detección e inmunidad contra falsas alarmas. Instalación interior, altura de montaje de 2,4 metros. Alimentación: 9 a 16 VDC. Consumo máximo: 36,5 mA. Dimensiones: 89 x 52 x39 mm. GRADO 2.

10GHz dual microwaves antenna. SeeTrue technology with two operating modes: stric mode (Detects movements inside a range of 12 meters despite of temperature or masking of insulating materials) and smooth mode (Detects movements with 60% of insulation masking). 90° opening. Anti-pets or zero zone detection (selectable). Active antimasking (Exceed EN50131 standard), with pre-alarm. Temperature compensation. Solid state relay for alarm, masking and sabotage. Dual sabotage tamper (Cover and wall). Operating temperature from -35°C to +50C. Dimensions: 128 x 62 x 54 mm. Grade 3 Class II certified according to EN50131-2-2. Wall or corner installation. Optional support, not included.

Double technology motion detector with anticamuflage and antimasking: Infrared (IR)and 5,8GHz Microwaves (MW). Maximum range of 12 meters with 9 curtains. Selectable range 4, 6, 9 or 12 meters. Mirror optic of high density. 5D processed of IR signal. Zero angle detection. Radar anti-mask. Removable connectors and differents resistance values of the final line to facilitate the establishment. Provides balanced interiors resistors that permit distinguish alarm, tamper and AM (Resistor not included) in a unique zone. WIFI interference immune. Remote self-test. Outputs: Alarm (NC) and Tamper (NC). Installation height: 1.8 to 3 meters. Power supply from 9 to 15 VDC. Working temperature: -10ºC a 55ºC. Dimensions: 126 x 63 x 50 mm. Security grade 2 certified.

Double technology motion detector: infrared (IR) and Microwaves (MW). Range: 12 meters with 7 curtains. Outputs: Alarm (NC) and tamper (NC). installation height: 1.8 to 3 meters. 86º field of vision. Power supply: 12VDC. Working temperature: -10ºC a 50ºC. Dimensions: 123 x 61 x 58 mm. Security grade 2 certified.

Digital dual technology detector with interchangeable electronics module. 15/50 Detection Range (m/ft). X-band doppler. Adjustable microwave range. Mounting Brackets (available separately). Digital Temperature Compensation. Digital Pulse Count. Microprocessor Technology. Interchangeable PCB Module. Multiple LED Indication. PD6662:2010 Grade 2 Class II. Range: 15 m.

The use of two technologies —microwave and PIR— and features like anti-masking, vandal-resistant housing, large coverage patterns and three microcontroller-based sensitivity modes, make the powerful DT900 DUAL TEC sensors ideal for the harshest commercial and industrial environments. Range 37 m x 3 m - 61 m x 6 m. Size: 134 x 178 x 210 mm.

The use of two technologies—microwave and PIR—and features like anti-masking, vandal-resistant housing, large coverage patterns and three microcontroller-based sensitivity modes, make the powerful DT900 DUAL TEC sensors ideal for the harshest commercial and industrial environments. Range 15 x 18 m. Grade 3.

A powerful combination of intelligent outdoor detection and HD camera that offers a reliable alarm video verification solution for home and business security. The VXI-ST / CMOD solution relies on OPTEX's best-selling outdoor intrusion sensor, VX Infinity, and comes complete with instant notification, live streaming and recordings from the 180-degree HD camera module that is also easy to mount and has night vision. The outdoor sensor and Wi-Fi camera can be added to an existing alarm panel or installed as a standalone outdoor intrusion detection solution and managed directly from a mobile app. VXI-ST is the standard wired PIR model.

PIR detector with 180° panoramic range, of the WX Infinity series for outdoors. Adjustable range up to 12m, 180°. Detection of independent right and left sides. Advanced processing logic SMDA. 14 pairs of horizontal detection zones and 2 vertical layers. Left / right detection range adjustable in 5 levels. Adjustable sensitivity in 3 levels. Alarm output left, right and fault / tamper output against tampering. IP55. Self-powered by lithium batteries.

PIR outdoor wireless detector, with double technology (double pyro-sensor and microndas), and active LED antimasking. W Option: white color (see availability, upon request, for other colors, including combinations of white, black, and gray). Built-in rear tamper. Built-in level for fast and accurate installation. Easy visual identification of all the adjustment elements (marked in blue in the detector). Quick opening by turning 90 degrees on the lower screw. Quick closing of the front cover, pressure, and walk test (3 minutes duration) automatic closing the lid. Flexible range (2.5-3.5-6-8.5-12m). Sensitivity adjustment (H, M, L). Advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Ceramic plate microwave module. Reach up to 12m, 90°. Mounting height 0.8 - 1.2m. IP55. It includes a protected box on the back to house the via radio transmitter. Power from 3 to 9 V.

PIR outdoor wireless detector, with double pyro-sensor and antimasking by active LED. W Option: white color (see availability, upon request, for other colors, including combinations of white, black, and gray). Built-in rear tamper. Built-in level for fast and accurate installation. Easy visual identification of all the adjustment elements. Quick opening by turning 90 degrees on the lower screw. Quick closing of the front cover, pressure, and walk test (3 minutes duration) automatic closing the lid. Flexible range (2.5-3.5-6-8.5-12m). Sensitivity adjustment (H, M, L). Advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Reach up to 12m, 90°. Mounting height 0.8 - 1.2m. IP55. It includes a protected box on the back to house the via radio transmitter. Power from 3 to 9 V.

PIR detector with 180° panoramic range, of the WX Infinity series for outdoors, with active LED antimasking. Adjustable range up to 12m, 180 °. Detection of independent right and left sides. Advanced processing logic SMDA. 14 pairs of horizontal detection zones and 2 vertical layers. Left / right detection range adjustable in 5 levels. Adjustable sensitivity in 3 levels. Alarm output left, right and fault / tamper output against tampering. IP55. Self-powered by lithium batteries.

Outdoor wireless PIR detector, with double pyro-sensor and antimasking by active LED. Main features: Flexible range (2.5-3.5-6-8.5-12m), sensitivity adjustment (H, M, L), and advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Reach up to 12m, 90°. Mounting height 0.8 - 1.2m. IP55. It includes a box protected on the back to house the via radio transmitter. Power from 3 to 9 V.

Outdoor wireless PIR detector, with double pyro-sensor. Main features: Flexible range (2.5-3.5-6-8.5-12m), sensitivity adjustment (H, M, L), and advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Reach up to 12m, 90°. Mounting height 0.8 - 1.2m. IP55. It includes a box protected on the back to house the via radio transmitter. Power from 3 to 9 V.

Outdoor PIR wireless detector with antimasking technology. Mounting height: 2.5 - 3m. Range of 24 x 2m (20 zones). IP55. Operating voltage: 2.5-9VDC. Power 3 - 7.2 VDC, lithium batteries (not included) consumption 4 mA max A 3VDC. Dimensions: 198 (H) x 93 (W) x 286 (F) mm. Includes bracket, visor and battery compartment, facilitating battery sharing with the transmitter (not included).

Outdoor PIR wireless detector with antimasking technology. Mounting height: 2.5 - 3m. Spherical fresnel lens. Range of 12m with an angle of 85º (94 zones). IP55. Power 2.5-9 VDC, lithium batteries 3 - 7.2VDC (not included), consumption 4 mA max to 3VDC. Dimensions: 198 (H) x 80 (W) x 82 (F) mm. Includes mounting bracket, visor and battery box, facilitating battery sharing with the transmitter.

Wireless. Double PIR sensor. Scope: 2 / 5 x 1m, 5º, 2 zones. Rejection RFI: 10V / m. Reject light. More than 50,000 Lx. Temperature compensation, with 2 sensitivity settings. NC, NA. Wireless transmitter and receiver not included. Power 3 to 9 VDC, consumption 3 mA.

Outdoor wireless PIR detector, designed to protect facades, covers 24 meters (12 meters on each side), with four pirosensors and antimasking by active LED. W Option: white color (see availability, upon request, for other colors, including combinations of white, black, and gray). Built-in rear tamper. Built-in level for fast and accurate installation. Easy visual identification of all the adjustment elements (marked in blue in the detector). Quick opening by turning 90 degrees on the lower screw. Quick closing of the front cover, pressure, and walk test (3 minutes duration) automatic closing the lid. Scope of 24 m (12 m on each side), at an angle to the wall adjustable to 0 º or 3 º. Independent range adjustment on each side: 2.5 - 3.5 - 6 - 8.5 - 12 m. Antimasking by active LED. Sensitivity adjustment (H, M, L) independent on each side. Advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Mounting height 0.8 - 1.2m. IP55. Power from 3 to 9 V.

PIR outdoor wireless detector, designed to protect facades, covers 24 meters (12 meters on each side), with four pyrosensors. W Option: white color (see availability, upon request, for other colors, including combinations of white, black, and gray). Built-in rear tamper. Built-in level for fast and accurate installation. Easy visual identification of all the adjustment elements (marked in blue in the detector). Quick opening by turning 90 degrees on the lower screw. Quick closing of the front cover, pressure, and walk test (3 minutes duration) automatic closing the lid. Scope of 24 m (12 m on each side), at an angle to the wall adjustable to 0 º or 3 º. Independent range adjustment on each side: 2.5 - 3.5 - 6 - 8.5 - 12 m. Sensitivity adjustment (H, M, L) independent on each side. Advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Mounting height 0.8 - 1.2m. IP55. Power from 3 to 9 V.

Pair of stainless steel posts, of 120mm, valid for motar barriers, processors and sensor cable accessories and, in general, any device that must be mounted on a pole. Their construction in stainless material makes them suitable for outdoor use. When used to support microwave barriers, its great robustness allows to avoid false alarms caused by movements and vibrations caused by the wind. 49 mm diameter to fix the clamps supplied with MRW barriers.

Outdoor Microwave Motion Sensors. Range: 100 m. Frecuency MW: 10,525Ghz. Working Tª: -25ºC up to 55ºC. Dimensions: 310 x 260 mm. The MRW series microwave barriers are X-band microwave outdoors motion sensors used in high risk applications where the presence of the intruder needs to be reported. Microwave technology products have maximum reliability. Changes in weather conditions do not impact on the working principle of this technology.

Outdoor Microwave Motion Sensors. Range: 50 m. Frecuency MW: 10,525Ghz. Working Tª: -25ºC up to 55ºC. Dimensions: 310 x 260 mm. The MRW series microwave barriers are X-band microwave outdoors motion sensors used in high risk applications where the presence of the intruder needs to be reported. Microwave technology products have maximum reliability. Changes in weather conditions do not impact on the working principle of this technology.

MRW microwave barrier alignment tool. They allow various sensor settings: field strength, CAG and sensitivity, as well as selecting the appropriate power source. They can be adjusted using the alignment tool to ensure optimal installation results. At the end of the installation, this tool can be used to carry out the walk test of the units. The built-in buzzer allows this test to be performed by only one person.