Reach 15 meters. EN50131 Grade 2 Certificate. Based on the advanced detection technologies of the RISCO™ Group, DigiSense has been designed to ensure superior detection performance and false alarm immunity. Because the housing of all models has the same compact design, the installer can mix DigiSense detectors of different technologies in the same installation, keeping the same overall appearance. Interior installation, mounting height from 2 to 2.7 meters. Power: 9 to 16 VDC. Maximum consumption: 36.5 mA. Dimensions: 106 x 60 x 47 mm.

Reach 15 meters. EN50131 Grade 2 Certificate. Based on the advanced detection technologies of the RISCO™ Group, DigiSense™ has been designed to ensure superior detection performance and false alarm immunity. Because the housing of all models has the same compact design, the installer can mix DigiSense detectors of different technologies in the same installation, keeping the same overall appearance. Double RFL. Ball joint included. Interior installation, mounting height from 2 to 2.7 meters. Power: 9 to 16 VDC. Maximum consumption: 36.5 mA. Dimensions: 106 x 60 x 47 mm.

Reach 12m diameter. EN50131 Grade 2 Certificate. LuNAR™ PIR is a discrete profile ceiling mounted digital detector, designed with the most advanced components to ensure reliable operation in a wide range of applications. The LuNAR™ PIR employs a dual-element PIR sensor with real digital temperature compensation, and also provides 360 ° coverage thanks to a wide-angle Fresnel lens. Interior installation, mounting height from 2.8 to 4 meters. Power: 9 to 16 VDC. Maximum consumption: 15 mA at 12VDC. Dimensions: Ø135 x 27 mm.

Passive infrared detector QUAD, reach 15 meters and antimasking. Internal protection of the PCB. Simple and elegant design with a single convex lens. Anti-masking by Active IR. RISCO™ bus connection that includes an additional zone input for the connection of a contact or any relay detector, thereby saving the wiring of the detector to the central unit. Opto-relays for protection against the attack of large magnets. Tampers: cover and wall / corner. Corridor lenses (optional). BWare™ Wall / Ceiling Bracket RA51T (optional). Interior installation Power: 9 to 16 VDC. Maximum consumption: 41 mA. Dimensions: 127.6 x 64.2 x 46.6 mm.

Bidirectional wireless Expansion module with 4 inputs / 4 outputs and X-10 protocol (16 devices). Compatible with Agility™ 3. EN50131 GRADE 2 certificate. Fully supervised Tamper box and wall. Includes local transformer and rechargeable batteries. Dimensions: 145 x 90 x 40 mm. 4 wired inputs NC, NO, RFL 2 relay outputs 3A, 2 open collector outputs 500mA. Connection to BUS. Max. Distance 300m 350mA consumption.

The KNX / Modbus module allows RISCO™ systems - Agility™, LightSYS™ and ProSYS™ Plus, with the IP communication module - to interact with building automation or security management systems, using the KNX protocol or Modbus. The module can be configured to operate in KNX mode or Modbus mode.

Expansion module of 16 conventional wired zones for ProSYS™ Plus. EN50131 GRADE 3 certificate. Allows the extension of wired zones. Each zone can be NO / NC EOL-DEOL-TEOL with 1ms response time. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical), 100mA (max).

Expansion module with 8 conventional wired zones for LightSYS™ and ProSYS™ Plus. EN50131 GRADE 3 certificate. Allows the extension of 8 wired zones. Number of expanders that can be added: 3 expanders in LightSYS™, 5 expanders in LightSYS™ 2, 32 expanders in ProSYS™ Plus. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical), 29mA (max).

Risco video expander module with radio receiver with 32 zones and 16 868 MHz buttons compatible with ProSYS™ Plus from version 1.4. Grade 3. Allows up to 8 camera detectors to a single video expander module. Up to 32 wireless zones and 16 “Rolling code” commands. It can be installed outside or inside the panel box. In ProSYS™ Plus, up to 16 video expander modules can be installed and a maximum of 8 on each bus line. Power supply: 12 - 14.4 Vdc. Maximum consumption: 65mA. Dimensions: 125 x 78 x 25mm.

32-zone and 16 868Mhz pushbuttons Grade 2 wireless receiver for LightSYS™ and ProSYS™ Plus. The LightSYS™ wireless receiver supports up to 32 wireless zones, 16 "Rolling code" commands and includes two relay outputs. The receiver can also be used in stand-alone mode. It is ideal for the control of parking doors, supporting up to 200 controls and 2 outputs.

868MHz unidirectional wireless repeater for zones. Compatible with Agility™ 3, LightSYS™ 2 and ProSYS™ PLUS. The unidirectional radio repeater is used to extend the radio range between the RISCO™ systems and their unidirectional radio devices. The repeater can extend the distance in a normal environment or in environments with a high level of noise that could affect their communication with the panel. Up to 7 repeaters can be linked, so the extension range can be extended.

Expansion module with 4 outputs relays for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. Certified EN50131 GRADE 3. Each output can be activated by different events related to the system, partitions, zone or user. Possibility of programming NO or NC. Only the circuit without box is supplied. 4 output relays of 3A. Connection to BUS. Max. distance: 300m. Consumption 25mA (typical), 140mA (max).

Additional Expander Module with 32 zones on BUS for LightSYS and ProSYS/ProSYS Plus RISCO control panels. Grade 3 Certified. Each BUS Zone Expander creates a separate BUS branch. Each Expander can be configured to support 8, 16, 24 or 32 detectors on the BUS. The BUS branch increases the overall security of the system in the event that a certain BUS detector is sabotaged. It has the function of isolator and concentrator. Risco BUS detectors allow remote adjustment.

1-zone wired expander BUS module for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. 1 zone miniature module to connect detectors in BUS. The detector relay can be assigned to any zone number. Reduced size allowing installation in the detector. Dimensions: 11 x 38 mm. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical).

Z-Wave smart universal on / off plug. Manufacturer: Fibaro FGD-212. Wireless dimming of lights. Up to 2.5 kW of power. Power supply: 100 V - 240 V.

Z-Wave intelligent universal dimmer on / off. Manufacturer: Fibaro FGD-212. Wireless dimming of lights. Up to 2.5 kW of power. Power supply: 100 V - 240 V.

Z-Wave smart plug with "F" connection type. White color. Colored LED for display of consumption. Power supply: 110-230 V. Maximum power: 2500W. Manufacturer: Fibaro FGWPF-102.

Z-Wave smart plug with "F" connection type. White color. Power supply: 110-230 V. Maximum power: 3000W. Manufacturer: TKB TZ68G.

Z-Wave garage shutter/door controller. Manufacturer: Philio PAN08. Full and partial up/down function. Power: 90 ~ 240VAC Maximum load: 1100W Overload protection. Self-calibration Repeater

Z-Wave dimmer smart plug with "F" connection type. White color. Wireless regulation of lights. Power supply: 110-230 V. Maximum power: 300W (Only for incandescent lamps). Manufacturer: TKB TZ67G.

Pluggable 4G communication module for WiComm Pro control panel. Grade 2. Supports multi-channel communications. Includes antenna for mounting in plastic box. Easy to install, it connects directly to the control panel board. Allows communication through 4G / GSM networks for transmission of events to CRA and with connection to the cloud. Allows remote access to the panel through the configuration software. It can be used as primary communication or as a backup for IP or PSTN communications.

Multi-Socket Pluggable 4G GSM Module for Grade 2 Polycarbonate Case for Agility (from version 5.62); LightSYS (from version 6.05) and ProSYS Plus™ (from version 1.4.3). The 4G Communication Module is a plug-in module, enabling RISCO Control Panels to communicate via 4G/3G/2G networks for reporting, control and remote programming. It can be used as the primary communication or as backup for the IP and Wi-Fi communication module. The module supports the SIA/IP, SIA and Contact ID reporting formats. The 4G Communication Module is compatible with LightSYS, ProSYS Plus, Agility and WiComm Pro and is supplied with an antenna. A 3-meter antenna extension can be ordered separately. The 4G Communication Module is also compatible with the COB (Cellular on Bus). With the COB, the 4G Communication Module can be installed along the system bus of a LightSYS or ProSYS Plus alarm system and thus, be placed up to 300 meters away from the control panel. The Multi-Socket 4G Communication Module supports parallel notification and reporting of events to RISCO Cloud, Monitoring Stations and Follow Me destinations (via email and/or SMS). Voice reports can be executed only if the fallback option to 2G or 3G is supported by the network provider. The 4G Communication Module also supports remote access to the panel using CS for configuration and diagnostics.

3G GSM Multi-Socket module + antenna for ProSYS™ Plus or LightSYS™ version 5.2x or higher. EN50131 Grade 2 certificate. GSM / GPRS module 3G Multi-Socket plus antenna for mounting in metallic box. Communication with CRA through the cloud or "Software IP Receiver" of RISCO™ (SIA, Contact ID). Users can receive system messages, SMS, voice messages and emails. Supports remote programming of the panel using the "Configuration Software". Plug in plate.

Multi-Socket TCP / IP module for Agility™ (from version 4.xx), LightSYS™ (from version 5.xx) and ProSYS™ Plus. EN50131 GRADE 3 certificate. Communication through a TCP / IP network. Multi-Socket. Communication with CRA through the cloud or "Software IP Receiver" of RISCO™ (SIA, Contact ID ...). It allows sending emails to end users containing alarm notices. Supports remote programming of the panel using the "Configuration Software". Plug-in connection to board directly.